Why is my headset speaking on YY unclear! There are also murmurs

Take a look at the settings in your YY, such as whether the environment is quiet or noisy. After entering the channel, there is a sound card button on the menu, you can click on it, and you can know the effect in YY.

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

Maybe there's something wrong with your microphone.

The echo of one's own speech in YY voice is mainly a problem with the software settings.

In YY's voice settings, select Microphone, Noise Suppression and Echo Cancellation, strengthen the microphone, and don't tick the front.

Microphone settings: the small speaker in the lower right corner Right-click Recording device: Set the existing microphone into a preset device in the recording, and then double-click the microphone or point attribute after the ignition, and you can adjust the volume of the microphone and the microphone enhancement in the level (this is appropriately adjusted, and some computers will have current sound) in the enhancement Select noise suppression and echo cancellation.

Select Listen to this device in the listening, you can hear your own voice, if you don't want to hear your own voice, don't check it in front of it (don't choose this normal use, some computers will be stuck or noisy).

This is your microphone's problem, if you don't have microphone, turn on your voice, choose not to adjust it and try again.

In your case, it is as if the Eustachian tube is abnormally open, and a normal person should not be able to hear your own breathing when you breathe. It is recommended that you go to your local hospital for a check-up. This situation cannot be solved by pinching the nose and puffing up.

Double-click the sound icon in the lower right corner of the working column (Xiaolama bar), Options - Properties - Microphone (checked) - Microphone mute (checked) - OK. Note: When the microphone mute is not checked, you can hear your own echo, and if you check mute, you can't hear your own voice.

The method is simple:

You double-click on the little speaker at the bottom right of the screen, find "Properties" in "Options" and then "Microphone Volume".

You can't hear the "muted" one under him by putting it on the hook, remove the hook, and then you can hear what you are saying.

If there are still problems, check the headset and software installation.

You're all karaoke, and you still want to hear your own voice? Are you not afraid of going out of tune while listening to your own voice while singing?

When you try the microphone, you can record it yourself and try it out to see the effect. Listen to whether your microphone is clearly in the mixer.

Check the settings.

It's normal to be silent......

If you must hear your own voice, you can double-click the speaker icon in the lower left corner, and a "Volume Control" window will pop up, and remove the "mute" box in front of the "Microphone" column so that you can hear the sound in your microphone.

Do you want to sing. Turn on the stereo mix and you're good to go. But if your microphone is bad, it will reverberate.

If you don't sing, it is recommended that you don't turn on the state dust. How to turn it on: Double-click the audio speaker. High.

Attribute. Stereo mix: Dot-and-tick. Confirm rollout OK.

Wish. The other party's audio settings turned him off with stereo mixing on, and yours too. It's all in the recording device.

Mute the microphone.

Hello, please check whether the channel you are in is set up with voice mode, "free mode" anyone can make voice speech, "microphone mode", non-channel administrators can only grab the microphone and go to the microphone number one (or through the microphone) can speak by voice, "chairman mode" only channel administrators can speak by voice. If you've been "banned" by a channel moderator, you won't be able to speak on your channel.

If you are still unable to speak after the above reasons are ruled out, it may be that there is a problem with your headphones and sound card or improper settings, resulting in the inability to speak normally

Please see if your microphone jack is correct first, try both the front and back jacks;

The default call button of YY is F2 key, if pressing F2 key does not work normally, it is recommended that you change to another button to try;

If you can't use any of the keys, please check whether your keyboard settings conflict with other software;

Click on the inverted triangle mark above the channel chat window to enter the "sound card settings" to see if you can hear your own voice, if there is no sound, it is recommended that you adjust the input device in the YY sound card settings to try whether it can speak normally.

Click Start - Programs - Accessories - Entertainment - Audio Recorder to record and check if there is any sound. If you can't hear the sound in the recording, check that your sound input and output devices are intact or try reinstalling the sound card driver to see if it works properly. If you can hear the sound in the recording, we recommend that you adjust your sound card to see if the voice can be heard normally.

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

There is no sound test when YY speaks, and there is a murmur that needs to be set.

Microphone settings: small speaker in the lower right corner Right click Recording device: Set the existing microphone as the default device during recording.

Then double-click the microphone or dot properties in the level to adjust the volume of the microphone and the microphone enhancement (this is adjusted appropriately, turn up the amplification, some computers will have current sound), and select noise suppression and echo cancellation in the enhancement field.

Select Listen to this device in the listening, you can hear your own voice (this normal use is not selected, some computers will freeze or have noise).

When you turn on the reinforcement, you should also turn on the noise reduction.

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

Solution 1: Check whether the sound card driver is lost or damaged.

Solution 2: Check whether the YY setting is correct.

1. Find the [Wrench] - Settings button in YY.

2. Find the shortcut key in the hotkey settings.

3. Check if reverberation is enabled.

Solution 3: Whether the microphone in the system is properly handled.

Right-click the speaker in the lower right corner -- Recording device -- Double-click the microphone -- Level -- Microphone to add drag and drop adjustment.

Update the sound card driver to the latest version.

Then turn on YY's microphone to enhance the effect and turn it on to 4-6 times.

The small speaker in the lower right corner of the computer status bar,Sound settings,You look at the advanced settings to adjust the volume,If the advanced settings can't get in,It's blocked when you do the system.,Find one that will get the computer.,It'll be good soon.。

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

[Problem description]:

There is a murmur in the voice.

Cause Analysis]:

1.There is electromagnetic interference next to the sound output device.

2.The sound output equipment is aging.

3.Sound-related hardware acceleration setup issues.

Easy Steps]:

Solution]:

Solution 1: There is electromagnetic interference next to the sound output device, poor contact of the audio interface, etc., such as: mobile phone interference, the speaker interface is not firmly plugged in, etc.

Solution 2: The sound output equipment is aging, and if the sound is too loud, it will emit a whistling sound, and the sound output equipment such as the sound output device will be replaced.

1. Your wheat is too bad, it is recommended that you change to a better one. (What kind of macro draft wheat is good wheat: I personally found that the main thing is that the line of the wheat should be thick, that is to say, the line has multiple layers of shielding nets.)

By the way, the microphone on the microphone or the microphone and the headphones together are not easy to use, because they will be loud noise) to hide filial piety.

2. Is the small speaker on your computer quietly open or not? The correct settings are as shown below

Double-click the small speaker and click "Options" in the menu - Properties - in ** "Only select "Volume Control, Waveform, Microphone MIC", choose too much, it may cause noise.

Double-click the "Options" in the menu after clicking the small speaker - "Properties" - in the recording, "only select "stereo mix, microphone MIC", you can choose too much, it may cause noise.

By the way, I forgot to tell you, try not to use the "Microphone Boost" function. Otherwise, the noise will be loud. Normal microphone and sound card, it must not be strengthened to work normally.

3. There is an effect setting tool on the sound card, you can also try it, set it to "automatic squelch" or adjust the frequency equalizer, etc.

For the Internet café environment. The most practical way to do this is to turn off the "microphone boost"...

The key to this is to look at the Mai. You go to the Control Panel under Settings. It should work better.