The kitchen and bathroom are far away, how to solve the hot water problem?

The distance between the kitchen and the bathroom is far away, and the way to solve the problem of hot water: before the decoration of water and electricity, we must consider the location of the socket switch and the water supply and drainage.

of lines, etc. , and then we can use this kind of to determine whether the water and electricity wiring is to go to the decoration ceiling or the road surface. Whether a renovation construction team is reliable depends on the hydropower installation project.

The rails of the hydropower project made by a good decoration team are all over the place, orderly and effective, generally gathered in a line, and then scattered in the same part. After that, if there is any problem, it can be disassembled and replaced anytime and anywhere. In the use of pipe materials, PVC pipes are generally used, but air conditioning copper pipes will also be used in higher-end decorations.

The hot water is stored according to the heating to meet the requirements of the kitchen tap water in the standby state, and its hot water supply is very stable, the installation is flexible, and it will not be limited by the indoor space. The water storage kitchen treasure must be heated first. The supply method of hot water is indeed more complicated, and long-term heating also has a certain amount of wear and tear on the kitchen treasure.

If you don't heat it up early, you don't generate heat.

Damage, put as much water as you need, no need to store, save water and electricity. And the size is small, does not occupy too much indoor space, and it is very convenient to apply.

Before the installation of the gas water heater, not only should the water outlet circuit be embedded, but also the pipeline that can be worn through the natural gas pipe should also be embedded, which can ensure the beauty of the installation.

Be sure to buy some well-known brands, so that we can better ensure the security of our application. If you want to achieve the actual effect of hot water that is ready to heat, you must buy a zero-cold gas water heater.

can help us solve this problem, but it should be noted that there are all kinds of zero cold water and gas water heaters on the market.

If the kitchen and bathroom are too far apart, you can also choose to use an electric water heater.

Put it into the bathroom, buy a small kitchen treasure separately in the kitchen, and also avoid the generation of cold water in the kitchen and dining room, but it should be noted that the small kitchen treasure generally consumes more electricity, everyone must do a good job in various fields before installing the application, home decoration is never a trivial matter, and we must grasp some professional skills. <>

A thermostatic faucet can be installed. In this way, the temperature can be well regulated, and the hot and cold water can be well blended.

We can install two water heaters, one in the kitchen and one in the bathroom, and the problem can be solved perfectly.

I think first of all, you can choose to install a thermostatic faucet, which is a better effect, and you can choose to install a water heater, which is more expensive, and you should be more cautious when choosing a water heater.

When the kitchen and toilet are far away, the following installation methods can be considered for the installation of the water heater:

1. Install 1 water heater in the kitchen and toilet; The initial cost is high, but the use effect is good; The toilet is large and can be used large, and the kitchen can be installed with a quick heating and economical.

2. Only install 1 water heater, supporting circulating pump and pipeline; The noise will be loud and the operating cost will be slightly higher;

3. Install one water heater near the most frequent part of use, and the other position is connected by a pipe, which is far away and has serious heat loss.

The specific installation depends on the use habits and on-site conditions, and on the basis of ensuring safety and convenience, it takes into account the economy.

When the distance between the kitchen and the bathroom is relatively far, how to install a water heater can be selected for the specific situation of your home; When the kitchen and bathroom are far away, you can consider assembling hot water equipment separately, such as installing a water heater in the bathroom to meet the needs of bathing and washing your face in the bathroom; In the restaurant kitchen, a kitchen treasure can be installed independently to meet the needs of boiling water such as bathing and washing vegetables in the restaurant kitchen; This type of layout plan scheme is characterized by easy installation and use, and few pipeline layouts.

The disadvantage of this type of layout plan is that two household appliances must be assembled, which takes up more space and costs a little more. The kitchen of the restaurant is far away from a bathroom, which is looking for a state enterprise. Kitchen natural gas water heater, there is no doubt about it.

At the same time, the restroom near the kitchen of the restaurant is also made of natural gas water heater, which does not consume any cold water. Another bathroom far from the kitchen of the restaurant has a storage domestic water heater, and there is no need to worry about cold water. The restaurant kitchen is far from the two bathrooms, which is a bit inconvenient.

Kitchen natural gas water heater, the same and no doubts.

It is proposed to use a "circulating water system" for two toilets. said water recycling system.

In short, a control loop is added around the drain at the end of the heating pipe, so that every time boiling water is applied, the cool water from the original heating pipe can go home through the control loop circulation system, and the heating pipe will only come out with boiling water. This should be explained to the master when paving the hydropower project. The restaurant kitchen is far away from the bathroom, which does not mean that there is no way to use the water from the water heater, only unexpected, and there is no way to do it, and the water in the bathroom is connected to the restaurant kitchen, and the method is relatively simple.

Just take a look at the ground to connect the floor drain and the construction of the project.

Relativity is simple and easy, but once water seepage occurs, it is really difficult to solve the difficulty, and the only way to do so is to shovel the floor tiles on the ground.

After the overhaul is solved, the tiles are paved again. The water heater can not be assembled in the restaurant kitchen, and the bathroom can be installed, according to the direction of the toilet to the restaurant kitchenA recess is created in the wall, and the water from the water heater is connected to the dining room kitchen, which is different from the two indoor spaces, and boiling water can be used at the same time.

By installing a water heater in the bathroom and then laying common plumbing in the kitchen and bathroom, you can use the same water heater.

If the distance is far away, you can choose to install a hot water device separately, first install one in the bathroom, and then install one in the kitchen, so that the electricity used is actually about the same.

The distance between the kitchen and the bathroom is relatively far, so using a water heater, the kitchen needs to leave more cold water, and then the hot water can also be set aside, which is more water-consuming, and you can install a kitchen treasure in the kitchen.

This is the case for most families; The practice is to install an electric water heater in the bathroom, the electric water heater is only responsible for the bath water and washing water in the bathroom, and the kitchen installs a kitchen treasure separately at the washing basin to meet the hot water used in the kitchen; This will inevitably cause a long waiting time when using hot water in another room. How to solve this problem? It's easy to do by installing two water heaters – a kitchen water heater for the kitchen and a bathroom water heater for the bathroom.

<> convenient for sharing hot water between the two spaces. But there is also such a design, but the kitchen and bathroom are far away, in such a situation, how to adjust their plans in time, with the simplest way to make the kitchen and water heater can use hot water? When choosing a gas water heater, pay attention to the choice of zero cold water model, this kind of water heater due to the installation of a return water circulation device inside the machine, can be the first cold water in the pipeline, circulation heating, so that the water temperature in the pipeline is always kept in a constant temperature range.

Installing a water heater, the main problem is that it will form a waste of water resources, taking a bath is good, taking a bath with more hot water, relatively speaking, it is worth opening half a minute to release water, if it is to wash your face in the morning, put water for half a minute, wash your face for two minutes, it is really not worth it. The reason is that it takes a long time to take a bath, so it's okay to wait a little longer, and it takes a while for the bath bomb to get hot. Therefore, it is not obvious that the gas water heater runs more cold water, and the gas water heater does not need to consider the problem of running out of hot water.

It is divided into water storage type and instant heating type, and the power of water storage type is relatively small, ** cheap, but it has to be re-burned when the liter of water is used up, which is not suitable for families with large water consumption. You can enjoy hot water by opening the faucet instantaneously, burn as much as you want, small in size, but use a lot of electricity. It is also possible not to do a return pipe, and when installing a water heater in the later stage, an external hot water circulator is installed, but it is not beautiful.

Both installation methods are available, turn on the hot water faucet, and the hot water will be immediately discharged, without wasting cold water.

It will be better to install the water heater in the bathroom, and the water heater will not affect the use of hot water in any place no matter whether it is placed in the bathroom, but it will save space when placed in the bathroom.

The water heater can be installed in the bathroom, and then connected to the kitchen with some pipes, which is still very convenient.

It is best to install a water heater in the kitchen, which is not only very hygienic, but also a good guarantee of water in the kitchen.

The installation of the water heater should pay attention to its upper and lower partitions, so that the installation of this position must be very coordinated, to achieve a good coordination effect, the third point is that the installation should pay attention to the entire spacing.