What causes poor drainage in a washing machine? How do I find out the cause of the failure?

For the problem of poor drainage of the washing machine, check yourself from the following aspects, or promise to find the cause of the problem.

1. Confirm whether the faucet can be turned on correctly. At home, I often don't know whether the faucet is on or off.

2. Make sure that the washing machine is properly connected to the power supply.

3. Whether the drainage pipe of the washing machine can be installed correctly and connected to the drainage pipe. During the use of the washing machine, coins or other objects fell into the drain pump, causing the impeller of the drain pump to not rotate and drain properly. Because the drain of the washing machine is relatively high from the air, the water of the washing machine cannot be discharged.

4. Can the container door of the washing machine be closed tightly, so that the self-inspection procedure cannot be passed, and the water will definitely not come out.

5. Turn on the power supply to check whether the machine can start normally.

6. If it is a new washing machine, can it be installed for after-sales personnel, if not, it should be noted that there are usually four long container fixing screws in the container, which must be removed by yourself before use. Take a screwdriver and remove the cover from the back of the washing machine. You'll find that there's a plastic rope pulling on that hook, which is the one that releases water into it.

If the water does not come out, it may be that your rope is broken or the rope is too loose, and you change the hole with the hook down, which may be too light to pull and cannot open the water valve. If there is too much fluff, the lockdown is not tight, and the washing time leaks. It does not form a situation where water cannot be discharged.

Since I made the washing machine in my house, I am very clear about this.

7. If all of the above are correct, please contact after-sales customer service. The general reason is that there will be a drain valve, a loose conditioning nut or a cable, and it will not be able to drain the water; The drain valve may have foreign body infarction, and the drain hose is bent and deformed; Drainage solenoid valve fault; Broken on Desktop.

To sum up, when encountering similar machine problems, you can use the cleaning method to sweep step by step, and if there is no problem with self-inspection, you only need to ask professionals to overhaul. The whole washing machine usually has a warranty period of 3-5 years. Do not start directly disassembling the machine yourself, and do not form unnecessary losses.

It may be a faulty circuit, or a blockage, or it may be improperly used, or the drain is not fully opened, and it may be caused by damage to the tractor. The cause of the fault should be found out through inspection, and at the same time, it is necessary to understand the situation of non-drainage and pay attention to the phenomenon of failure of the drain.

Poor collective drainage, possibly due to clogged sewer pipes; It could also be that the pump draining the water is malfunctioning; Or there is too much debris accumulated at the bottom of the washing machine, clogging the drain; Check if the drainage is not smooth because of a blocked pipe, or you can ask a professional to come to repair it.

It may be that the drain pipe is blocked, it may be that the drain pipe is deformed and twisted, it may be that the pressure is not enough. It could be that there is a problem with the spring of the drain valve. It is best to find a professional to identify the problem.

It may be that the washing machine is faulty, or the drainage system is faulty, or the outlet pipe is blocked with impurities, or it may be Sister Lin, it is best to ask professional personnel to repair it, so that professional personnel can help you find out the cause of the failure.

If the drain is clogged, unscrew the back cover of the washing machine and clean the drain from the inside so that the problem can be solved, or find a professional to repair it.

The solution to the washing machine's poor drainage is as follows:

1. The drainage pipe is too high.

Solution: The water outlet is lower than that of the washing machine, so that the water can be drained normally, otherwise there may be water accumulation.

2. The drainage is slow, the possible reason is that the drain port is too high, and the tension spring strength of the drain valve is not enough, so that the valve core is opened.

Solution: You can lower the drain and replace the tension spring.

3. The drain pipe is twisted.

4. Check whether the drain valve and drain filter in the barrel are blocked by debris, causing slow drainage or even no drainage. It could be that the dirty material of the clothes is blocking the drain.

Solution: Remove the drain filter and clean it, flush the drain with water to remove the debris in the drain valve.

5. Open the back cover of the washing machine, check whether the drain valve pull strap has fallen off, and whether the valve pull belt or drain pull rod is broken and the washing machine drain pipe is blocked.

Solution: If the drain valve falls off, just reconnect it, if it is the cause of the blockage, it should be dredged in time.

1. At the corner of the rubber drain pipe connecting the washing machine bucket and the drain valve, dirt is deposited and the drain pipe is blocked, as long as the dirt in the pipe is flushed out with clean water, it can be dredged.

2. The drainage screen at the bottom of the laundry bucket accumulates too much dirt and blocks the running water hole. At this time, the dirt on the mesh screen of the drainage hole can be removed, so that the flowing water hole can be dredged.

3. The tension spring on the discharge valve that controls the tightness of the tension belt loses its elasticity, and the drainage can be fully opened. Adjustable short control strap to fully open the drain hole.

4. Due to long-term use, or improper use, the drainage pipe is distorted and deformed and affects the drainage, and it should be repaired or replaced with a new pipe.

1. There are foreign objects in the drainage pipes, such as dirt deposited at the corners, check if there is any cleanup.

2. If the pump is faulty and the upper drain is faulty, it can be repaired or replaced, or the pump can be dismantled and drained directly.

3. The drainage screen at the bottom of the laundry bucket accumulates too much dirt and blocks the running water holes.

4. Due to the use of too long or improper use, the drainage pipe is distorted and deformed and affects the drainage, and the pipe should be repaired or replaced with a new one.

5. The tension spring on the drain valve that controls the tightness of the tension belt loses its elasticity, and the drainage can be fully opened. Adjustable short control strap to fully open the drain hole.