How to clean up the inside of the laptop if it is dusted?

1.Before cleaning the laptop, turn it off and unplug it, and do not operate it with power. 2.

There are two ways to dust the keyboard, one is to use a special dust removal rubber ball to gently blow away the fine dust in the cracks of the keyboard, and the other is to use a micro vacuum cleaner to suck the dust in the cracks of the keyboard. If possible, the second method is recommended, which works best. 3.

After removing the dust, gently wipe the keyboard with a soft, damp cloth that won't lint off, and wipe it dry with a dry cloth immediately after that. Be careful not to let a drop of water fall into the gap of the keyboard, so as not to penetrate into the main unit and cause a short circuit.

Don't blow with something, it's not good to blow the ash into the machine.

When you don't usually use a keyboard (such as watching a movie), you can use a piece of paper to cover the notebook.

Dust under the keyboard Unless you take the keyboard apart, don't blow it or use something to deduct it.

If you are confident enough in yourself, you can remove the ash on the cooling fan and heat sink by yourself, and you can use a small brush to remove the ash on it! The main thing is that you can guarantee that you can install it It is recommended to spend some money to find a professional insurance! You know, if any of the sockets are not plugged in, the machine can't get up!

If you carefully disassemble the back cover after the warranty period (the use book will tell you which piece is what), then blow it with a pump, and then wipe it with a special cleaning cloth, this must be carried out under the condition of power failure; If it's in the warranty, it's better to go to the after-sales service, otherwise you dismantle it yourself, and they won't give the warranty, and the gains outweigh the losses.

With the rise of the Internet industry, laptops have become an indispensable object for people at present, especially for some specific work office workers, computers are the top priority, but many people have encountered the problem of gray display screen when using computers, so I will take a look at how to solve the problem of gray on the computer display screen.

Laptop dust is inevitable, and it is generally recommended to clean it once a year to two years. External dust will not cause damage to the computer hardware and will only affect the appearance, but there is more dust inside, which affects the heat dissipation. If the temperature of the computer is too high, it will get stuck.

If the heat dissipation is not good for a long time, it will have a great impact on the discrete graphics card and even damage the display. The integrated graphics card is slightly better, and most computers automatically shut down and restart when they overheat. It is best to install a master Lu on the computer, and have an intuitive understanding of the temperature of the computer.

It is inevitable that the computer will be dusted, so it is necessary to clean and care the computer, and those with strong hands-on ability can buy tools to do it themselves, disassemble the machine to clean the ash, recoat the CPU silicone grease, etc., and if it is not possible, you can go to a professional repair personnel.

Dust in the laptop screen is unavoidable when we use the computer, especially the computer that has been used for a long time, to solve one is to use a special dust removal rubber ball to gently blow away the fine dust in the gap of the keyboard, and the other is to use a micro vacuum cleaner to absorb the dust in the gap of the keyboard. If possible, the second method is recommended, which works best.

What will become of a laptop that has not been dusted for 10,000 years? I believe that many users don't know how to clean up computer dust, and they don't dare to do it themselves, worrying that they will accidentally break the computer.

But the laptop is used for a long time, it will also be like a desktop dust, if you don't clean it, the dust will be full of dust and reduce the heat dissipation performance, your laptop will be slow and stuck, and even in this summer of more than 30 degrees, it can be used as a barbecue plate, no matter how you clean up the cache, resetting the computer will not play a big role, and it must be a combination of soft and hard to make a perfect solution. So today I'm going to talk about how to disassemble the machine and clean the ash.

There are two ways to disassemble and clean the ash.

The first is to contact the after-sales service of the laptop, pay a certain fee, and hand it over to them to deal with (the handicapped party either has no tools or the local tyrant preferred);

The second is that we do it ourselves, have enough food and clothing, and then it is our disassembly time.

PS: Disassembling the machine may lose the warranty opportunity, it is recommended that you contact customer service first and ask about the situation before deciding to disassemble the machine.

Notebook cleaning steps.

Prepare a set of dismantling tools, very poor, screwdrivers are borrowed, so there is no diagram. The main thing is that a screwdriver will do the trick.

Step 1: Open the back cover with a screwdriver. PS: Be careful at every step and pay attention not to pry hard buckles.

Step 2: Remove the fan with a screwdriver, clean up the dust with a brush, and then clean up the ash on the copper sheet inside, after all, the dust near the exhaust fan is the most.

Step 3: Remove the memory module again, clean up the dust, and use the eraser to wipe the metal edges.

Step 4: Remove the screws of the hard drive, take out the hard drive, and wipe it with a clean towel.

Step 5: After cleaning, install the hardware back to its original position and fix it with screws, cover the back cover and tighten the screws, the dust of the notebook is cleaned up, put your hand on the heat vent after turning on the machine to feel whether the fan is working, if it is normal, it will be completed.

Remember not to pry hard during the cleaning process, as it is easy to cause irreparable damage to the computer.

The steps are as follows:

1. Turn off the power and remove the external power cable, remove the internal battery and all external equipment cables.

2. Use a small vacuum cleaner to suck up the dust in the macro cavity of the connector and the gap between the keyboard.

3. Wipe the surface of the casing lightly with a dry cloth and then gently wipe it, please be careful not to drip any detergent into the inside of the machine to avoid short circuit and burning.

4. Wait for the laptop to dry completely before turning on the power.

Here's how to clean the notebook:

Tools Ingredients: screwdriver, crowbar, hair dryer.

1. Prepare a set of screwdrivers, and remove the battery before removing the back cover. In order to prevent residual power, after removing the battery, you can press the power button to confirm that the power supply is definitely not energized.

2. Then, use a screwdriver to remove the screws on the back cover, if you are afraid that you can't remember the position of the screws, you can draw a schematic diagram on the paper, or wrap the screws in paper and write the location. After removing the screws, use a crowbar to open the buckle, if there is no warp, you can use a hard sheet. It should be noted that the keyboard and motherboard are wired, so open the keyboard gently.

3. Then use the corresponding screwdriver to remove the screws on the CPU fan, carefully remove the fan, clean up the dust with a cloth, and blow it with a hair dryer. After cleaning, put the fan back in again and fix it with screws.

4. Since the dust is mainly concentrated in the fan, don't move if there is not much dust in other places. After plugging in the cable between the keyboard and the touchpad and the motherboard, buckle the keyboard on the base, align it and press it, and the buckle will automatically snap on.

Maintenance of laptops

Battery maintenance: Do not charge at too high or too low current, especially avoid charging in the case of unstable voltage, try to avoid insufficient discharge on charging or over-discharge, the most suitable room temperature indoors.

Keyboard maintenance: Choosing a good keyboard protector can effectively reduce the wear and tear of the keyboard, avoid dust and debris falling into the gaps of the keyboard, wash your hands before using the laptop to avoid stains on your hands staining the keyboard, and the dust on the keyboard should be cleaned regularly, which can be cleaned with a small brush.

Display maintenance: Paste a protective film for the laptop, which can effectively prevent scratches and prevent the screen from absorbing dust, reduce squeezing, pressing, touching and other actions, so as to avoid damage to internal components caused by heavy pressure, and avoid sun exposure, long-term sun exposure may cause the LCD screen temperature to be too high, thereby accelerating aging.