How do I clean my case, how do I clean my computer case?

If you want to clean the case, you should first open the case cover, and then you can use a high-power hair dryer such as a hair dryer to clean the dust inside, which is ideal.

Under normal circumstances, when cleaning the chassis, they have a professional hair dryer, and they can blow the dust inside the chassis with a particularly powerful hair dryer.

If you want to clean the case of the computer, it is actually very simple, you only need to remove the case, and then use a small brush to remove the dust.

In fact, as long as you have strong hands-on ability, you can operate it at home, open the back cover of the case, dry it with a hair dryer, or brush it with a small brush.

To clean the case, you need to unscrew the screws, carefully remove the case, and then use a brush to dust it.

To clean up the case, you can first unplug the various wires to look at the side cover of it, and then blow it with that kind of hair dryer.

When it comes to cleaning up signs, you can take a brush and brush it so that you can clean it out.

For the case, after we use it for a while, there will be a lot of dust inside, and we need to use a hair dryer inside. Blow all the floating ash clean.

How to clean the chassis, use an air pump to blow the dust inside, take the machine outside to connect it to clear the atmosphere, and then urge it back there.

In the case of the case, the case cleaning is generally the case with dust, and then you can clean up the dust.

In the case of cleaning the limit, it is recommended that you open all the contents inside, and then what? Take a little sister-in-law something, and then, put it in the area, um, sweep it so that you may be less able to write quickly.

When cleaning the case of your computer, do not wipe it with a rag like a fan.

You have to mix a little hydrochloric acid with water, and then put some white vinegar to clean it up.

If you want to clean the case, you can analyze it according to one of its performances, and then clean yourself step by step, without operating blindly.

The auspicious settings should be found and then cleaned up effectively. It can be arranged according to the procedures of the system.

Well, this one has a special cleaning tool, as well as some cleaning agents.

I'll you this performance, take this one down and wash it with this water.

If you click on that Clear Data, you can clean up the stones.

Your house is quite pure, and you have to complete almost the number of tasks every day.

Related tools: Phillips screwdriver, special vacuum cleaner, special wiping cloth (or paper towel), dust cleaning brush, high-pressure air spray can, special detergent, inch cleaning disk and special cleaning liquid, cleaning disc and special cleaning solution.

If you want to do a good job, you must first sharpen your tools", will dig first"Guys"Get ready!

Remove the chassis panel.

1 Before disassembling the chassis panel, pay attention to unplugging all power supplies and wiring to avoid damage to the equipment caused by electric shock or pulling on the wiring. Please? quot;Phillips screwdriver"Remove the screws behind the left panel.

Generally speaking, the motherboard will be mounted on the right side of the main unit (based on the front of the main unit), so only the left side panel needs to be removed.

2 When cleaning the motherboard, be careful not to spray any liquid directly onto the motherboard. We can use it"High-pressure air spray cans"or a small vacuum cleaner to clean up dust or hair.

It is strictly forbidden to spray the detergent directly.

Make use of the compression jet tool to clean the dust from the motherboard.

3 For each empty slot, don't wipe it with a cloth that will shed hair, you can take it"Dedicated vacuum cleaner"Just clean it up a little.

4 Use high-pressure air to quietly disperse this nozzle or other paper towels that will not shed lint, and carefully clean the fan bearings and fan blades.

Note: Many high-performance graphics cards also have cooling fans, so be sure to clean them up too!

5 After the small fan is cleaned, the next step is to clean the big fan, that is, the part of the power supply ** that dissipates heat. Because the power supply ** device is a closed box-shaped object, we only need to clean the front and rear Qixun heat dissipation holes. Use an air canister, a special brush or a wipe to remove the hair and dust accumulated on the heat dissipation holes one by one to keep the air circulating.

Cleaning the chassis (listen to the landlord so, it should be cleaning the desktop). First of all, the most important point is to prevent static electricity, because if the static electricity hits the original in the computer, the original is gone.

If it is really necessary to clean the case, you can prepare a wet towel (wet towel to wipe your hands, anti-static, or wipe on the sleeve) before cleaning, moisture can remove static electricity from people.

1.Open the case – unscrew the two screws on the back of the case (one end with various sockets) (2 for my computer) – and do a preliminary cleaning of the machine.

Once the case is opened, the next step depends on the individual's habits.

I don't know how to clean the hard drive and the optical drive, I think the hard disk should not be cleaned, and I won't disassemble the optical drive.

Let's talk about the power supply first, the power supply will be hot, and the power supply is also the outlet for the heat dissipation of the chassis, there will be a lot of dust, there is nothing to say about the disassembly of the power supply, just disassemble it like that, although there are many wires inside, but there is only one interface.

Next, let's talk about the CPU, first remove the wire of the fan on the heatsink on the CPU, clean the fan, then remove the 4 screws that fix the heatsink, remove the heatsink and clean the heatsink, the CPU does not need to be removed (just see if the heat dissipation silicone on the CPU is dry, if it is dry, it needs to be replaced) [Silicone can help conduct heat to the heat sink], and then install it step by step. (It takes a little effort to put on the 4 fixing screws of the heat sink, which is more difficult to get).

Memory module, my desktop often finds that the ash on the memory module is a thick layer, it is difficult to clean, you can use a toothbrush to brush it, if possible, after brushing, wipe the socket of the memory and the gold finger of the memory with cleaning solution (gold finger: the gold connection area of the memory). Note:

When the memory is unplugged, first break the two fixing buckles of the memory outward at the same time, and then the memory will automatically pop up; To install memory, you need to pay attention to the front and back of the memory, there is a gap on the memory module, align it down, press it down a little hard, to what extent, to the two fixing buckles next to the memory socket are automatically locked.

Then there should be nothing to clean, after which don't forget to clean the big fan on the case, remove the wires, unscrew the screws, clean up, install.

Remove it and remember how to install it again.,Anyway, my computer I often clean up according to the above.

Finished!!!

The mob doesn't even know how to clean up the computer.

To do what they do is to do it the other way around.

If there are screws on the back of the case, use a hair dryer to blow it after opening.

The cleaning of the chassis is relatively simple, mainly using the ear wash ball to blow away the dust inside the case, motherboard, graphics card and other equipment, if there is more dust, the author recommends removing all the boards in the chassis to clean, so that the effect is better. Clean the case case with a damp rag, but be careful to wring the rag out as much as possible and do not let water run into the case.

There are many ports on the motherboard, and these places are easy to get dirty, especially some empty ports, such as unused PCI ports or memory slots on the motherboard. In the future, installing the board in a slot that has gone into dust can easily lead to system instability. The author recommends using an ear wash ball to blow out the dust in the slot, rather than using a cotton swab or other toothpick to clean it.

Blow off the dust. It is a good idea to clean the gold finger part of the board at the same time as cleaning the slot. The author recommends using a clean and soft rag or an eraser to wipe the gold finger interface part of the board card. This can not only ensure the more stable operation of the board and eliminate hidden dangers, but also protect the gold finger and prolong the life of the board.

Goldfinger was stained with a lot of dust.

The author uses an eraser.

After cleaning. Board fans and power supply fans are also one of the most important places to be cleaned, especially power supply fans. Quite a few cases are designed with the power supply as an air outlet, which can cause a lot of dust to accumulate on the power supply fan. Without disassembling the power supply, you can use an ear wash ball to blow off dust from the fan.

The first step is to lay down the chassis with the ports on the back of the chassis down.

*Part of the explanation is that you can not look at it*, because when the connector on the back of the case is down, the sockets of each part of the motherboard are up, which can be said to be in the positive direction.

Step 2, open the case test cover, only open the top piece, *part of the explanation is not to see* Open the piece away from the back interface to see the things inside, the piece near the back socket has a stop lever inside, you can't see the internal parts. When you don't need to remove parts such as hard disks, optical drives, etc., you don't need to remove the cover on the side close to the back socket, step 3. The main components you see are these, 1. Mains power. (Lean against the top part of the rear of the chassis on the top part of the host power inlet).

2 motherboards, there are a lot of things plugged into the motherboard. Generally, there are, CPU fans, memory, graphics cards, network cards. and other PCI hardware.

3 Hard disks, optical drives, floppy disks, etc., which are fixed to the chassis with screws. Connect with the motherboard through the data cable, there are serial ports, there are parallel ports, depending on your own computer.

*Part of the explanation is that you can not look at it*

Step 4. Where possible. Remove the parts. Proper dust removal can improve the performance of your computer (users have just bought a new phone and are comfortable to use. After a year or two, it feels slow. Part of it was because there was too much dust,)

*Part of the explanation can not be seen* Dismantling the parts should be noted:

CPU you can't see. Under the CPU cooling fan. Newbies are advised not to dismantle.

Memory: You want to open the white (or other color) on both sides of the memory module slot. Commonly used are green and white) plastic card holder, and the memory module will automatically pop up. You can brush the memory slot with a fine brush, and use an eraser to erase the part of the memory gold copper sheet (gold finger), when inserting it back. Break the circlip, lay the memory module flat, and gently press it down with even force. In place, the circlip will lock automatically. Issued"Click"A bang.

Graphics card: The one that connects to the monitor.

How to remove the graphics card, just pay attention to the circlip behind the slot of the graphics card.

The cleaning method is the same as for memory.

Network cards, etc., are basically the same.

It is recommended to clean the frequently used computers every 3 months.

NameisLiu Yong's AGP slot is wrong. It is not a PCI slot, an AGP slot is a type of graphics card slot. Plug in the old GF4 graphics card.

There is generally only one motherboard, about 10 cm. Usually with a brown color.

The modern graphics card slot is a PCI-E slot, which is generally green. The same motherboard usually has only one, and the PIC slot is generally white. There are many strips on one motherboard. Usually 2 to 5 strips. You can insert a network card 1394 card. etc

1. Vacuum cleaner or leather tiger, hair dryer (must be cool breeze) - remove the dust in the case;

2. Soft brush - remove some dust that cannot be blown off;

3. Eraser - clean up gold fingers such as memory sticks and graphics cards;

4. CPU heat dissipation silicone - if you remove the CPU heatsink to clean it, re-apply it on the CPU when you install it.

Just use a small brush and a small vacuum cleaner that emits static electricity. Remove all the accessories of the host, especially the CPU fan, and be sure to clean it well. After cleaning up and assembling, remember to apply silicone grease to the CPU fan. Power on, OK.

You can use a hair dryer with power, you can blow the dust, I think you generally have a brush at home, don't use it, it will be static.

1. Remove the screws behind the main chassis;

2. Remove the side panels.

3. Vacuum the ashes with a vacuum cleaner or blow the ashes with a hair dryer.

Fourth, remove the graphics card and brush it with a brush (the graphics card socket is also brushed) Fifth, remove the memory module and brush it with a brush (the graphics card socket is also brushed) Sixth, brush the motherboard with a brush (don't disassemble the CPU, it's OK to clean the dust) One thing to pay attention to is to prepare the hair dryer and brush in advance.

First, cut off the power supply, open the case screws and cover, and then use a soft brush to gently and carefully brush off the dust. At the same time, use a vacuum cleaner to clean up the dust while vacuuming, and then return to its original state.

Prepare the following tools: clean brushes, blowers, small blow dryers, erasers, screwdrivers, and silicone grease. Before we get into that, I'd like to send you a diagram to give you a rough description of the locations of each slot (90% of gamer PCs are like this, and a few will change depending on the chassis design).

It is a process that requires patience, and the correct order is:

1: First use a blower to blow out the dust of the chassis in a large area (be sure to do it outdoors without affecting others), and blow it several times until it shows that it is relatively clean.

2: Unpack the hardware separately and put it aside.

3: Then use a brush (which can be bought in a hardware store) to gently clean the graphics card slot and memory slot, of course, don't forget that the motherboard as a whole also needs to be cleaned.

4: Clean the dust on the graphics card and processor cooler, lighter, the fan is easy to break, and then use the eraser to gently wipe the gold finger of the graphics card and memory module (a row of yellow metal sockets is commonly known as the gold finger), and finally don't forget to clean the dust on the power supply fan.

5: Wipe the original silicone grease on the processor, then apply a new one, squeeze out the size of a soybean and wipe it evenly.

6: Assemble, this does not need to be emphasized.