How to clean the home oxygen inhaler after a long time?

The cleaning of household oxygen inhalers should be cleaned every week, and the filter element should be replaced with a new net if necessary. Soak in medical alcohol for 30 minutes, then rinse with water and dry before use. It is advisable to pay attention to cleanliness.

Summary. If there is a fault in the home oxygen inhaler, it is necessary to repair the road, the oxygen station. Send an oxygen station to fix it.

Or the manufacturer directly repairs. Find a manufacturer to repair, see what the problem is, if it is a general circuit problem, it can be repaired by repairing a household appliance, if there is a problem with the molecular sieve, you can only find the factory. Fault 1:

Phenomenon: The customer obviously feels that the gas volume is small when using it. Reason:

1.The humidification bottle is leaking. Exclusion Method:

Turn on the power switch of the oxygen machine and set the flow meter to the 3 liter position. Plug the oxygen outlet end of the humidification bottle by hand, and the float of the flowmeter should move downward, and at the same time, the humidification bottle will make a snorting sound (the safety valve is opened), otherwise, the humidification bottle will leak. Tighten the bottle, or change the humidifier bottle.

Fault 2: There are water droplets flowing out of the oxygen outlet: there are also two possibilities for this kind of failure

1) The humidified water tank is too full and exceeds the maximum water line, causing water droplets to enter the oxygen pipe. As long as the water is poured out and does not exceed the maximum water mark, the fault can be removed. 2) After long-term use of the oxygen concentrator, the water vapor in the air flow condenses the pipe wall.

Just pour out the water in the humidification tank and fill it with water when there is no water coming out of the oxygen inhalation pipe, so that the fault can generally be solved. Fault 3: Phenomenon:

The machine is not running, and the power indicator is not on. Reason: Electricity is not added.

Exclusion method: check whether the power socket has electricity, check whether the fuse is damaged, and check whether the power cord is broken.

Can you tell us more about that?

If there is a fault in the home oxygen inhaler, it is necessary to repair the road, the oxygen station. Send an oxygen station to fix it. Or the manufacturer directly repairs.

Find a manufacturer to repair, see what the problem is, if it is a general circuit problem, it can be repaired by repairing a household appliance, if there is a problem with the molecular sieve, you can only find the factory. Fault 1: Phenomenon:

Customers obviously feel that the gas volume is low when using it. Reasons:1

The humidification bottle is leaking. Exclusion method: Turn on the power switch of the oxygen machine and adjust the flow meter to the 3 liter position.

Plug the oxygen outlet end of the humidification bottle by hand, and the float of the flowmeter should move downward, and at the same time, the humidification bottle will make a snorting sound (the safety valve is opened), otherwise, the humidification bottle will leak. Tighten the bottle, or change the humidifier bottle. Fault 2:

Water droplets flow out of the oxygen outlet: There are also two possibilities for this type of failure: 1) The humidified water tank is too full of water, exceeding the maximum water mark, causing water droplets to enter the oxygen pipe.

As long as the water is poured out and does not exceed the maximum water mark, the fault can be removed. 2) After long-term use of the oxygen concentrator, the water vapor in the air flow condenses the pipe wall. Just pour out the water in the humidification tank and fill it with water when there is no water coming out of the oxygen inhalation pipe, so that the fault can generally be solved.

Fault 3: Phenomenon: The machine does not run, and the power indicator does not light up.

Reason: Electricity is not added. Exclusion Method:

Check whether the power socket is electric, check whether the fuse is damaged, and check whether the power cord is broken.

1. Daily maintenance of oxygen tube. The nose tip on the oxygen tube is the most likely to get dirty, and it is recommended that it should be cleaned after each use. It can be wiped with alcohol, or it can be soaked in 5% potassium permanganate solution for 5 minutes, and then washed with water, which is very simple.

The oxygen tube can be cleaned once or twice a week, and care should be taken to keep the tube dry and free of water droplets.

2. Daily maintenance of humidification bottles. Because the humidification bottle is filled with water, there will be a layer of dirt after a long time, so you can soak it in vinegar for a few minutes and rinse it off. Once or twice a week to ensure hygienic use of oxygen.

The core tube inside the bottle and the filter element at the bottom of the bottle should be rinsed and checked for proper installation. Keep an eye on the water in the humidifier bottle every day, usually using cold or distilled water.

3. Daily maintenance of the filter. The life of the household oxygen generator is very closely related to the filter, and timely cleaning or replacing the filter screen can not only prolong the life of the oxygen generator, but also protect the molecular sieve and compressor. Therefore, when buying an oxygen concentrator, it is best to choose the kind of external filter for easy cleaning.

Note: The cleaned filter must be dry before installation, and do not turn on the oxygen concentrator before installing the filter. If the filter is blackened, it should be replaced regardless of the length of use.

1. Cleaning of the shell.

The shell of the household oxygen concentrator should generally be cleaned once a month, and the power supply should be cut off when cleaning to prevent electric shock. When scrubbing, use a clean and soft cloth and take a small amount of disinfectant to wipe the shell slowly, and be sure to pay attention to the gaps in the shell so that water does not flow in.

2. Cleaning of humidification bottles.

Generally, the distilled water or cold boiled water in the humidification bottle of household oxygen generator should be replaced every day, and the humidification bottle should be cleaned once a week, first rinsed with light detergent, and then rinsed with clean water to ensure the quality of oxygen. When cleaning the humidification bottle, attention should be paid to cleaning the core tube and the filter element at the bottom of the bottle to ensure the smooth flow of oxygen.

3. Replacement of fuse tube.

The replacement of the fuse tube of the household oxygen generator, which is also an important procedure for the maintenance of the oxygen generator, must first unplug the power cord and cut off all power supply, and then replace it according to the instructions of the fuse tube of each oxygen generator.

4. Cleaning of oxygen inhalation tubes.

Generally, the oxygen tube of the household oxygen generator should be cleaned every three days, and the upper nasal suction tip of the oxygen tube should be cleaned after each use, but it can be soaked in 5% potassium permanganate solution for 5 minutes and then washed with water, or wiped with medical alcohol. It is recommended to replace the oxygen tube every 2 months. It should be noted that the inside of the oxygen tube should be kept dry and there should be no water droplets.

5. Cleaning of the filter screen.

The cleaning of the filter screen has a protective effect on the compressor and molecular sieve of our oxygen generator, and can also prolong the service life of the machine, so please clean or replace it in time. It should be noted that when the filter is not installed, the oxygen concentrator is not allowed to operate.

Below, briefly talk about the cleaning of the filter, the filter screen in the primary filter is generally cleaned once every half a month, and the filter screen in the secondary filter is generally cleaned once a month, this is in the general environment, but also according to their own situation, if you see the filter screen black, then no matter how long it has been used, it should be cleaned or replaced. The cleaning method is to clean it with a detergent first, then rinse it with clean water, and it must be dried thoroughly before installing it on the machine.

In summary, generally speaking, when cleaning and maintaining the household oxygen concentrator, it is best to go to the home oxygen concentrator to have a more comprehensive understanding before starting, please read the instructions of the home oxygen concentrator you bought carefully, and then start cleaning and maintaining the household oxygen concentrator, so that it will be more convenient to clean.