How to clean the air conditioner wind wheel, what is the method of air conditioning wind wheel clean

If you want to clean the wind turbine, but do not want to disassemble the wind wheel, then you should first unplug the power plug of the air conditioner, then open the air conditioning panel, and then use a tool to unscrew the screws fixed on the basin, and then pull the blade grid motor away. Secondly, the air deflector should be removed, and the air conditioner water bag should be fixed under the air conditioner, and the water bag should be leaned against the side of the wall, and it is best to stuff the water bag into the back of the air conditioner, so as to avoid water leakage to the wall when cleaning the air conditioner, so that the wall is dirty. Next, you should spray some detergent on the wind wheel, and at the same time, you should turn the wind wheel and put a brush deep into the wind wheel to continuously brush so that the dirt on the wind wheel is cleaned.

In order to avoid secondary pollution, it is best to wear plastic gloves when cleaning the wind wheel. Then fill the watering can with clean water and use the watering can to rinse the position of the wind wheel continuously until no dirty water comes out. In order to ensure that the wind turbine can be cleaned, it is recommended that you have a professional to help you clean it.

Precautions for the use of air conditioner 1, the air conditioner is in the process of use, it is best to take out the filter screen and clean it once every half a month, and keep the filter clean at any time, which is conducive to fresh indoor air and avoids damage to health; 2. When the air conditioner is not in use out of season, the air conditioner should be covered with an air conditioner cover to prevent dust from entering the machine; 3. Before using the air conditioner for the first time in summer or winter, you should first remove the air conditioner cover, turn on the air conditioner power, set the air conditioner to ventilation mode, open the doors and windows for ventilation, and remove the odor in the machine before normal use.

If it has not been cleaned, it can be cleaned with some detergent.

Air conditioner rotor cleaning needs to be disassembled and cleaned, the specific method is as follows:

Tools Ingredients: Medium Frucchi, slotted screwdriver.

1. Remove the panel of the indoor unit first: find the screw position to remove the screws, and pull up the manual panel, generally 3 under the panel and 2 in the middle.

<>3. Disassemble the water tank, remove the stepper motor of the wind deflector (2 self-tapping screws) when disassembling the water tank, and pull the water tank out directly by hand.

<>5. After the motor shaft and the wind wheel shaft are exposed, loosen the fastening screws of the wind wheel shaft and the motor shaft, and then pull the motor and the wind wheel out together with a little force to clean.

6. After the disassembly and cleaning of the wind wheel, the filter screen should be cleaned, which can be rinsed with clean water or use a professional air conditioning cleaner.

The method of cleaning the air conditioner wind wheel <> is as follows:

Turn off the power of the air conditioner first to avoid accidents.

Open the air conditioner, remove the indoor unit panel, and find the wind wheel.

Use a soft brush or vacuum cleaner to remove dust and dirt from the surface.

If there are hard-to-remove stains attached to the wind wheel, you can use a mild detergent or soapy water to clean it. But be careful not to expose the board and wiring to liquid damage.

After washing, rinse thoroughly with clean water and dry with a clean cloth.

Before reinstalling the indoor unit panel, make sure all parts are dry.

Clean with a soft-bristled brush: Use a soft brush to gently brush the surface of the wind wheel to clean up flying dust, dirt and other debris.

Use a vacuum cleaner to clean: Insert the hose of the vacuum cleaner into the air outlet of the air conditioner, turn on the air conditioner and turn on the vacuum cleaner to let the vacuum cleaner suck out the dust and dirt from the air wheel.

Wash with detergent: You can use some special detergent, spray it on the surface of the wind wheel, then gently brush it with a soft brush, and finally rinse it off with clean water.

Disassemble and clean: If the dirt on the surface of the wind wheel is stubborn, you can disassemble the air conditioner, take the wind wheel out, and clean it thoroughly with detergent and brush.

1.Wipe the wind wheel with a damp cloth to wipe off the dust;

2.Vacuum with a vacuum cleaner to suck the dust out;

3.Wash with detergent to remove dirt;

4.Wipe with a damp cloth and wipe off the detergent;

5.Wipe with a dry cloth to wipe off wet stains;

6.Wipe with a rag to wipe off any remaining water stains.

Cleaning of floating ash can be operated by individuals. If you want to clean it thoroughly, it is best to ask a professional maintenance personnel to do it. It is necessary to disassemble eight pieces of dismantling and cleaning up special tools and equipment to completely remove the old ashes.

I just unloaded it and used a high-pressure water gun to flush it in 20 seconds, brand new.

The method of removing the air wheel in the air conditioner is as follows:Take Midea air conditioner as an example, first remove the panel of the indoor unit, loosen the 5 screws on the panel with a Phillips screwdriver, and pull up the manual panel at the screw position, 3 at the bottom of the panel and 2 in the middle. Gently remove the panel, the top of the panel needs to be pried off with a screwdriver.

At this time, the wind deflector is removed together.

Then disassemble the electrical control box and remove 2 screws.

Then disassemble the water tank, remove the stepping motor of the wind deflector when disassembling the sink (2 self-tapping screws), the sink can be pulled out directly by hand, which is stuck with a clip, then you can see the motor box of the wind wheel, and remove the cover on the motor box (2 self-tapping screws).

Finally, you can see the exposed motor shaft and the wind wheel shaft, loosen the fastening screws of the wind wheel shaft and the motor shaft, separate the motor shaft and the wind wheel shaft, and then use a little force to pull the motor and the wind wheel out together. The dismantling of the wind wheel is complete.

The cleaning method of the air conditioner's inner unit is as follows:

1. First of all, we need to remove the panel inside the machine, and then use a Phillips screwdriver to loosen the five screws on the panel, the specific position of the screws will also have some differences, generally there are three under the panel, two in the middle, when removing the lighter, the top of the panel can be pry down with a screwdriver, at this time we can remove the wind deflector together.

2. After removing the control box, there will be a water tank, which can be pulled out directly by hand, because this was stuck with a clip before, so it is easier.

3. After we disassemble them, we can clean the filter screen on it, you can first gently shoot it or use a vacuum cleaner to suck it, but if we find that there are too many dusts, at this time, we need to use some clean water to clean it carefully, or we can also use a professional cleaning agent to wash it.

The cleaning process of the air conditioner rotor is as follows:Tools Raw materials: Gree air conditioner, cleaning machine, screwdriver, detergent.

1. The user should be protected by power-off, which should be remembered as follows.

2. Then disassemble the grille and twist it at the top with a screwdriver, as shown below.

3. The connecting bucket lacks the disassembly of the air outlet frame assembly, which is the upper half of the shell part of the air conditioner, as shown below.

4. Then disassemble the middle partition, only by removing the middle partition can the Zheng crack be cleaned, as shown below.

5. Spray evenly with the professional detergent of the air conditioner, and wait for half an hour in the evaporator to be ingested into the inner wheel.

In summer, you can be inseparable from the air conditioner every day, so before using the air conditioner, most people know to clean the air conditioner, because there are very dirty things in the machine, if it is not cleaned, it will blow indoors, and the human body will be affected. Let's introduce to you how to clean the air conditioner wind wheel.

1. First of all, unplug the air conditioner, and remove the panel and wind deflector of the indoor unit.

2. Dismantle the electrical control room, motor box and water connection tank in turn.

3. Next, loosen the screws in the wind wheel shaft and motor shaft, pull the wind wheel out forcefully, and clean it with water or cleaning agent.

How to choose an air conditioner.

1. The area of the house determines the number of air conditioners.

Generally speaking, a room of 12 square meters is suitable for a small air conditioner, then 16 square meters is suitable for choosing a 1 horse air conditioner, like a 20 to 23 square room is suitable for banquet chain air conditioning, the more people, the larger the indoor area, you must choose a larger number of air conditioners.

2. Frequency conversion and fixed frequency determine whether to save power.

When the fixed-frequency air conditioner is in use, it will consume more electricity, so after the inverter air conditioner reaches the temperature, it will switch to low-frequency operation. Although it is consuming electricity, the power consumption will be very low, and it is necessary to restart the compressor to consume power. Therefore, it is more energy-saving to use frequency conversion than fixed frequency.

3. Selection of air conditioner model.

There are outward-facing windows and there is the option of window air conditioning. If there is no outward-facing window, it is not suitable, you must pay attention to its appearance, you can't install a less conspicuous place, you should choose a split air conditioner.

Energy efficiency is more cost-effective.

Open the air conditioner for 5 hours a day, 90 days a year, generally speaking, the inverter electricity fee for level 1 energy efficiency is almost 178 yuan per mu, and the electricity cost for level 3 energy efficiency is 221 yuan. If you use air conditioning half the time in the summer, you can choose level 3 energy efficiency, which is cost-effective.

Summary: The relevant content of how to clean the air conditioner wind wheel is introduced here, you can follow the above steps to clean it, and some details in the cleaning process must be paid special attention. If you want to know more about related information, please pay attention to Qeeka Home.

First remove the panel of the Huisheng indoor unit, loosen the 5 screws on the panel with a Phillips screwdriver, and pull up the manual panel at the specific screw position, 3 at the bottom of the panel and 2 in the middle. Remove the panel with light dismantling and force, and the top of the panel needs to be pried off with a screwdriver. At this time, the wind deflector is removed together.

Disassemble the electrical control box and remove 2 screws.

Disassemble the water trough, remove the stepper motor of the wind deflector (2 self-tapping screws) when disassembling the sink, and the water trough can be pulled out directly by hand, which is stuck with a potato jujube clip.

At this time, you can see the motor box of the wind wheel, remove the cover on the motor box (2 self-tapping screws).

The motor shaft and the wind wheel shaft are exposed, loosen the fastening screws of the wind wheel shaft and the motor shaft, separate the motor shaft and the wind wheel shaft, and pull the motor and the wind wheel out together with a little force.

The dismantling of the wind wheel is complete. Wash it with clean water or detergent.

First of all, remove the panel of the indoor unit, loosen the 5 screws on the panel with a Phillips screwdriver (Midea air conditioner), and pull up the manual panel at the specific screw position, 3 at the bottom of the panel and 2 in the middle. Gently remove the panel, the top of the panel needs to be pried off with a screwdriver. At this time, the wind deflector is removed together.

Then disassemble the electrical control box and remove 2 screws.

Then disassemble the water tank, remove the stepper motor of the wind deflector when disassembling the water tank, and the water tank can be pulled out directly by hand, which is stuck with a clip, then you can see the motor box of the wind wheel, and remove the cover on the motor box.

Finally, you can see the exposed motor shaft and wind wheel shaft, loosen the fastening screws of the wind wheel shaft and the motor shaft, separate the motor shaft and the wind wheel shaft, and use the brother to pull the motor and the wind wheel out together. The dismantling of the wind wheel is complete.

Air conditioner refers to the process of adjusting and controlling parameters such as temperature, humidity, cleanliness, speed and other parameters of the air in the environment of the building structure by artificial means.

Generally, it includes cold source heat source equipment, cold and hot medium transmission and distribution system, terminal device and other major parts and other auxiliary equipment. It mainly includes pumps, fans and piping systems. The terminal device is responsible for using the cold and heat from the transmission and distribution to specifically process the air and temperature to make the air parameters of the target environment meet the requirements.