Which is the first to apply reinforcement glue and primer, and what is the difference between reinfo

As a high-performance, high-value-added adhesive, epoxy resin adhesive is highly valued by the industry, but at the same time, counterfeit and shoddy products are often patronized. Therefore, we can identify it by the following chemical methods. Method 1:

The sample is dissolved in sulfuric acid, and then concentrated nitric acid is added, and a large amount of sodium hydroxide solution is poured into it. The second type: drop 5 drops of concentrated nitric acid on the resin adhesive film, move the reactant into the test tube after a few minutes, add 6ml of acetone and then add potassium hydroxide ethanol solution to make it alkaline, if it turns from red to purple, it indicates that it contains epoxy resin glue containing bisphenol A type, this method is also intuitive; Method 3:

Take the adhesive film or glue solution, p-phenylenediamine and 8ml of sample water, boil for 8min, if it is epoxy resin, the solution is peach....

Apply primer first and reinforce the adhesive in transit.

Reinforcement glue can avoid the phenomenon of nails being too thin and broken, if the nails themselves are thin, too soft and easy to break, you need to use reinforcement glue. The function of the coated primer is to isolate the moisture of the base layer, prevent the waterproof coating film from blistering and falling off, and at the same time strengthen the base layer so that the coating film does not peel off.

If the nails are uneven or the nails are relatively thin and soft, you can brush a layer of reinforcing glue after the primer, and then brush the nail polish glue. That is, the reinforcement step should be: primer - reinforcement glue - color - sealing layer.

There are 6 most commonly used nail shapes in life: square, square, oval, pointed, round, and fan, and you can create the perfect nail shape according to your hand shape and preferences.

The difference between reinforcing primer and primer: the fit is different.

The primer is to make the color of the glue more suitable for the nails and not easy to fall off. The seal is used on top to keep the nails shiny and new, and also makes the nails more durable.

It can be replaced with reinforcing glue. Because the reinforcing glue and the primer also play a role in reinforcing the primer, the primer has a layer of protective nail protection, which is also reinforcing the glue, and the reinforcing glue can also make the nail polish glue more firm, so it is feasible to use the reinforcing glue instead of the primer.

When doing nail art, many people will apply a layer of reinforcing glue on top of the primer, so the function of reinforcing glue is to fix the nail art, and it is a product that makes the nail art stronger and more durable, so the nail reinforcing glue can be used as a primer. Some people with thin nails will also use a layer of reinforcing glue when doing nail art, so that the nail polish glue can adhere more firmly.

However, it needs to be paid attention to in some aspects instead of primer, for example, nail reinforcing glue needs to bake the lamp for a long time, because its texture is more solidified and viscous, so it takes longer than the primer to bake the lamp, in order to ensure that the nail reinforcing glue can dry quickly, and after applying the nail reinforcing glue, do not wipe it with water, and apply nail polish glue directly on the nail reinforcing glue. Because nail polish glue will be filled with a lot of chemical ingredients, and a lot of blending agents will be added to it, so its solidification will be faster.

There are many procedures in the process of nail art, such as using primer and reinforcing glue, but many friends in the process of nail art, do not know what order to use when using these two things, and then I will give you a detailed introduction to nail art first primer or reinforcing glue, and will also tell you about the reason why nail primer is easy to fall off.

First, apply primer and then reinforcing glue for nail art.

During the manicure, it is necessary to apply primer and then reinforcing glue. In the whole process of nail art, the order of reinforcement should be to apply primer first, and then apply reinforcement glue. Then apply your favorite color directly, and finally go straight to your nail polish.

Be sure to shine the light during the sealing layer and apply the reinforcing glue, otherwise the nails will be very easy to break.

Second, the reason why the nail primer is easy to fall off.

There are many reasons why nail primer is easy to fall off, first of all, it may be that in the process of polishing, the polishing of the nails is not polished in place, and at this time, in the process of application, the primer and the entire nail surface will not fit well. Another reason may be that the nail polish is not cleaned properly, such as there is a lot of moisture on the nail, or there are some fine impurities on the nail, if it is not cleaned, it is easy to cause the primer to not fit the nail well. Another common reason is that in the process of applying nail polish, if you want to turn on the lamp, you may not have enough time to shine the lamp.

The content shown above gives you a detailed introduction to nail art first with primer and then with reinforcing glue, and at the same time, it also gives you a detailed introduction to the reasons why nail primer is easy to fall off.

Apply primer first, then reinforcing glue.

The reinforcing glue can improve the thinness, softness, breakage, and unevenness of the nails, make the nails firmer, and keep the nails longer.

What is the difference between reinforcement primer and primer, different fit, difference between reinforcement primer and primer: different fit. The primer is vertical to make the color of the glue more suitable for the nails, and it is not easy for the plum to fall off, and the first thing to do to do nail art is the primer.

The seal is used on top to keep the nails shiny and new, and also makes the nails more durable. It can be replaced with reinforcing glue. Because the reinforcing glue and the primer also play a role in reinforcing the nails, the primer has a layer of protective nail protection, which is also reinforcing glue, and the reinforcing glue can also make the nail polish glue more firm.

The primer is ordinary glue, and the reinforcing primer is such a better and stronger primer.

It is possible to apply only primer.

It is okay to apply primer on fingernails, because primer will be chosen in the process of nail art, which can make the stability better, not easy to decolorize, and can make the nails more lubricated.

Nail polish glue can directly contact the nails, and nail salons generally use primer before using nail polish glue, which is to make nail polish glue present a better nail art effect.

Primer benefits: Primer is an adhesive that is applied to the surface of the adherent before applying the adhesive to improve the adhesive performance. The function of the coating primer is to isolate the moisture of the base layer, prevent the waterproof coating film from blistering and falling off, and at the same time strengthen the base layer, improve the bonding strength between the coating film and the base layer, so that the coating film does not peel off, and prevent the needle eye of the coating layer.

porosity and other defects.

Usually the primer is formulated with polyurethane.

Component A and component B specially used for primer are mixed and stirred evenly according to 1:3 1:4 (mass ratio), which can be coated and constructed, and component A and component B can also be added with xylene.

Mix and stir to combine.

Usually the mass ratio is 1::20, for small areas, yin and yang angles.

Pipe roots, floor drains.

and drainage outlets and other complex parts with brushes, large areas can be rolled with long hair rollers.

The reinforcing glue is more adhesive and stronger. The difference between the reinforcing roller ruler bottom glue and the bottom glue: the fit is different.

The primer is to make the color of the glue brigade more suitable for the nails, not easy to fall off, and the first thing to do nail art is the primer. The seal is used on top to keep the nails shiny and new, and also makes the nails more durable. It can be replaced with reinforcing glue.

Because the reinforcing glue and the primer also play a role in reinforcing the primer, the primer has a layer of protective nail nails, which is also reinforcing glue, and at the same time, the high reinforcing glue can also make the nail polish glue more firm, so it is feasible to use reinforcing glue instead of primer.

The removable primer is more adhesive and stronger.

After the detachable bonding, the glue can be aged by heating, boiling, or other trembling methods, and then disassembled off the non-detachable strength is high, and it is not good to disassemble the hole of the company in Kuer Industry.

The primer is strong, because the primer is to make the glue color more suitable for the nails and not easy to fall off, and the first thing to do nail art is the primer.