What s the deal with iPhone horn noise?

1.Magnetic field interference.

If there is a magnetic field generated by the passage of electric current near the environment of the call, it will also cause noise in the earpiece, in which case, avoiding these magnetic fields can solve the problem of earpiece noise. Look around for speakers and other appliances with large magnets, just avoid them.

2.Signal issues.

If the signal of the call environment is not good, it will cause a "rustling" sound during the call, in this case, changing the call environment will naturally solve the problem.

3.Poor earpiece contact.

When our mobile phone accidentally dropped, it may cause the contact of the earpiece to loosen or desolder, which will cause the mobile phone earpiece to appear murmuring, in this regard, you can go to the repair shop to find someone to see, basically, as long as the loose place is welded on, it can be solved.

4.Faulty circuits.

If there is a problem with the handset circuit of the mobile phone, there will also be noise when answering **, which also needs to be checked by the maintenance personnel, and the circuit can be solved after restoration.

To sum up, it is the main reason for the noise of the mobile phone earpiece, and it should be noted that the probability of failure of some copycat mobile phone handsets with rough quality and workmanship is also relatively high. At the same time, if your phone's earpiece doesn't make a lot of noise, it may be caused by a network problem, so don't worry about it.

1. If there is a lot of noise or current sound during the call, this situation is generally a problem with the earpiece and can only be replaced.

2. If there is a broken sound during the call, then it may be that the earpiece is debris, because there is a magnetic substance on the earpiece, which is easy to absorb small particles containing iron.

3. It is recommended to bring the equipment to the regular after-sales center for processing.

There is a noise from the speaker of the iPhone.

1. There is a discharge phenomenon on the machine board, so it is recommended to clean and dry.

2. Tail plug leakage, it is recommended to clean and dry.

3. If the receiver paper tray is damaged or the quality is not good, it is recommended to replace this part.

4. If the soft cable is short-circuited and leakage, it is recommended to re-apply for after-sales welding line.

5. If the audio peripheral components are soldered and leakage, it is recommended to bring your mobile phone to the Apple customer service center for repair.

1. It may be that the mobile phone has been flooded before, and when you use the mobile phone again, the mobile phone will be noisy.

Solution: Find the after-sales service of the Apple mobile phone and let the professionals deal with it.

2. There may be strong electromagnetic interference around, causing the Apple mobile phone to make a sizzling sound after being interfered with by electromagnetic waves.

Solution: It is recommended to change the location, preferably a spacious place with less electromagnetic interference.

3. It may be that the vibration diaphragm in the speaker of the Apple mobile phone is damaged, the vibration diaphragm is the core component of the mobile phone speaker, once the vibration diaphragm is damaged, the amplitude and direction of the vibration will be wrong, causing the speaker to have no sound or make noise.

Solution: Find the after-sales service of the Apple mobile phone and let the professionals deal with it.

4. If there is only noise or current noise when talking, it is generally a problem with the earpiece, and there may be some debris in the earpiece.

Solution: Try to clean up the clutter, if necessary, find the after-sales service of the Apple mobile phone, and let the professionals deal with it.

Make model: iphone13

System: Take iphone13 as an example, the noise of the Apple phone speaker is because of the setting problem, you can turn on the noise reduction. It is divided into 2 steps, and the specific steps are as follows: 1 Go to Settings Accessibility Open the phone settings icon and tap the Accessibility option.

Make model: iphone13 pro

There is a source of interference around the device, the speaker is blocked or dirty, the speaker hardware failure, software settings and other problems will cause the mobile phone speaker to have noise, if there is a interference source around the device, it is recommended to try it in another place, the speaker is blocked or dirty, you can use a cotton swab to clean it up, if it is a hardware problem, then it needs to be repaired, if it is a software problem, you can try to solve it by the following methods:

Method 1: Swipe up from the bottom of the phone for 1 second, swipe up the program, and close all background programs.

Finally, press and hold the power button and the volume plus button, slide the slider to turn off, and press and hold the power button to turn on after powering off.

Method 2: Open Settings on your phone and tap Accessibility.

After entering the page, swipe down, find the audio visual entry, and finally turn on the mono audio and **noise reduction function.

Method 3: Open your phone's settings, tap General, and select Software Update.

After entering the page, check if there is a new version, if there is a new version, select Update.

Method 4: Open the phone settings, enter the page, and click General.

Click Transfer or Restore iPhone, and after entering the page, select Restore.

pop-up window, click Reset All Settings, and click Reset All Settings again.

Summary: Method 1:

Swipe up at the bottom of the phone to close all background programs.

Press the power button, volume plus key, turn off, press the power button to power on.

Method 2: Go to Settings Accessibility.

Go to Audio Vision, turn on mono audio and ** noise reduction features.

Method 3: Go to Settings for Universal Software Update.

Check out the new version and select Update.

Method 4: Go to Settings General.

Choose to transfer or restore your iPhone.

Select Restore all settings.