Win732 bit system removable disk cannot be opened, cannot be accessed, and access is denied

Updated on technology 2024-06-04
7 answers
  1. Anonymous users2024-02-11

    Hello. The U disk hardware comes with a driver, which can be recognized when connected to the U disk, but it cannot be used normally. The system module is damaged.

    Verification method. Insert another usb flash drive, and the same problem occurs, the system module is damaged.

    My personal recommendation is to reinstall the system.

    The stability of the software that is installed on a genuine system from the pirated home version to the ultimate version cannot be guaranteed. It has become a pirated system and then turn on win7 to automatically update and update system files,Compatibility is not guaranteed。

    Either use genuine win7 flagship version 32 64-bit,Or use all pirated win7 ultimate version 32 64-bit (pure version ghost is acceptable),Pirated version,Personally recommend the earth win7 system (64-bit ghost I have installed,It's good to use),But I just use ghost 11 to restore the gho file to install the system。 At least the gho file is usable, the 32-bit earth system, which I haven't used. Estimated quality is ok.

    FYI.

  2. Anonymous users2024-02-10

    Some users report that in the process of using mobile hard disks, they often encounter the problem that the computer prompts "unable to access the disk", so how to solve the problem that the win7 mobile hard disk cannot be accessed? Let's take the win7 ultimate system as an example to share the specific processing methods for you, let's look down together.

    Here's how to deal with it:

    1. Find the "Start" menu in the lower left corner of the desktop, and then find the "Run" option, which is selected by the red box in the picture. However, you can also use the shortcut key combination "win+r" to quickly open the running window.

    2. Then you need to enter the "cmd" command in the "run" window to enter the command window, which is the page shown in the figure below, and you need to enter "the drive letter where the chkdsk mobile hard disk is located: r", for example, H disk, enter H.

    3. Then hit enter, the system will automatically repair the damaged mobile hard disk, you can wait patiently, if there are too many files in the mobile hard disk, it may take a long time. When we see the words "Windows has corrected the file system", the repair is complete.

    The above is about win7 mobile hard disk inaccessible handling methods, which is fierce, there is the same problem can be solved in accordance with the above methods.

  3. Anonymous users2024-02-09

    You don't have to change it... Just use the administrator (or a user with relevant permissions) user to do so.

  4. Anonymous users2024-02-08

    1. It may be heavily poisoned, 2. It may not be well divided when partitioning, 3. The format is wrong, 4. The removable disk access is denied in the COMS chip.

  5. Anonymous users2024-02-07

    Problems with your own computer settings, denying access to a USB flash drive, or something similar. Check your firewall and settings yourself.

  6. Anonymous users2024-02-06

    Here, the author recommends a professional disk management tool for you, which can ensure that your Mac can read and write NTFS files unimpeded, just like reading your Mac's own file system. If you're interested, read on!

    Quickly reads and writes NTFS disks.

    When an NTFS format disk is connected to a Mac, in the Disk Manager interface, select the inserted disk, and we will see some relevant information, such as the file system it belongs to, the preferred font size, and so on.

    We were able to read and write the contents of the files on the disk very quickly, and it was very smooth to use, and we were not prompted that the disk was not compatible.

    Format your disk with ease.

    Click on the inserted NTFS format disk, on the right side of the software interface, we can see the words "formatted". If we want to do the formatting operation, select the corresponding "File System", enter the volume name, and click "Format" again, we can successfully format our disk.

    Figure 2: Formatting the disk.

    The whole process is very convenient and usually takes only a few seconds.

    Effectively maintain the repair disk.

    Tuxera NTFS for Mac 2019 is more than just a disk read/write tool, it's also our disk manager. In Disk Manager, we can check NTFS disks to ensure that the disk data is secure.

    Figure 3: Check NTFS Format Disk.

    Disk Manager intelligently detects some problems in NTFS disks, and the detection results are displayed in detail in the white box on the right side of the page. If we find any damage, we are able to fix it.

    If your Mac computer also has a situation where it can't read and write NTFS format normally, you might as well try this software. For the disk that has been commonly used, we still have to take good care of it.

  7. Anonymous users2024-02-05

    In win7 system, the location of the access disk is unavailable, and most of the failures of denied access are caused by insufficient permissions, and the lack of access rights in the security leads to the emergence of this problem, and the same problem will also appear when opening the folder.

    By default, you log in to the system with administrator privileges, open the properties of the file, and the administrators user group only has the read permission, and you need to enable the trustedinstaller permission.

    Configure the trustedinstaller permission.

    windows registry editor version

    hkey_classes_root\*\shellunas]

    Obtain TrustedInstaller Permissions

    hkey_classes_root\*\shellunas\command]

    ” /c takeown /f \”1\” icacls \”1\” /grant administrators:f”

    isolatedcommand”=” /c takeown /f \”1\” icacls \”1\” /grant administrators:f”

    hkey_classes_root\directory\shellunas]

    Obtain TrustedInstaller Permissions

    noworkingdirectory”=”"

    hkey_classes_root\directory\shellunas\command]

    ” /c takeown /f \”1\” /r /d y &&icacls \”1\” /grant administrators:f /t”

    isolatedcommand”=” /c takeown /f \”1\” /r /d y &&icacls \”1\” /grant administrators:f /t”

    Then save and suffix the document. txt is changed to registered**. reg

    Then open this file directly, the system uses the registry to import the above ** by default, after you right-click on any file, you will find that there is an additional option to get trustedinstaller permissions.

    Then you can do it, and there will be no restrictions on permissions.

Related questions
5 answers2024-06-04

The video memory can't be modified.,If you want to increase it, change it to a 512.。

35 answers2024-06-04

The configuration is a bit out of place, so I can only reduce the special effects. I suggest you try the Prince of Persia series, it's the same company as Assassin's Creed, I'm the Prince of Persia series that Assassin's Creed played after clearing the customs, it's not bad!

6 answers2024-06-04

Solution:

1. Turn off your computer's anti-virus software or corresponding application security software; >>>More

7 answers2024-06-04

If you feel stuck, you can try to solve it like this: 1. Open the "Command Prompt" in the "Accessories" in the "Menu" and "All Programs" 2. Then a black dialog box will pop up, in "All Rights Reserved... All rights reserved. The following paragraph is followed by the English type: >>>More

14 answers2024-06-04

The computer is installed with the 64-bit operating system of Win7, so that the computer can not have 4G memory. >>>More