win7 32 bit N card how to adjust the smoke head

If you feel stuck, you can try to solve it like this: 1. Open the "Command Prompt" in the "Accessories" in the "Menu" and "All Programs" 2. Then a black dialog box will pop up, in "All Rights Reserved... All rights reserved. The following paragraph is followed by the English type:

I don't know if I can copy and paste it) and then press the enter key to pop up the "Local Group Policyr"3.Open "Computer Configuration", open "Administrative Templates", open "Windows Components", open the 7th from the bottom "Application Compatibility"4.Open the 4th "Turn off the Application Compatibility Engine", change the "Not configured" in the upper left corner to "Enabled", and then confirm it stand-alone5.Open the "Close Program Compatibility Assistant" in the 5th corner, change the "Not configured" in the upper left corner to " Enabled"Then the stand-alone machine is OK I'm using a desktop problem.,The desktop is XP.,The notebook is win7 ultimate.,So there's no screenshot·· In fact, there are all on the Internet, I just summarized them together!!

1. Open the "Command Prompt" in "All Programs" in "Menu" and "Accessories".

3. Enter the following paragraph in English: , and then press the Enter key to pop up the "Local Group Policer".

4. Open "Computer Configuration", open "Administrative Templates", open "Windows Components" and turn on the 7th to last "Application Compatibility".

5. Open the 4th "Disable Application Compatibility Engine", change the "Not Configured" in the upper left corner to "Enabled", and then confirm it on a stand-alone basis.

6. Open the 5th "Close Program Compatibility Assistant", change the "Not Configured" in the upper left corner to "Enabled", and then confirm it on a stand-alone basis.

There are three ways to do this:

One. 1 If your graphics card is an N card and use Windows.

2Tap the Start button and then tap Control Panel to open the NVIDIA Control Panel.

4. Then set the bottom color fast inner strip as: brightness + 78% contrast + 55% hue + 11 saturation + 35%.Select Apply when you're done pulling.

5. Go back to the desktop. Right-click on the desktop. Click Properties. Properties in "Settings", "Color Quality" select "Medium (16-bit)", and then OK.

6 And then it's OK. into the game. You will find that looking at white smoke equals nothing. Red smoke can also be seen. The green smoke is a bit transparent.

Two. 1.First, right-click on the properties and then set the screen resolution to 800 by 600

2.Then click Advanced, turn on the monitor, and change the screen refresh rate to 75 Hz.

3.Then open the option above the monitor.

4.Then click to launch the NVDIA control panel, this step is a little stuck, wait a minute.

5.After turning it on, choose to change the resolution, refresh rate 75hz, color depth 16 bits.

6.Then select Adjust the color settings of the main surface, adjust the digital vibration control to between 80 and 100, and click Save.

7.Finally, enter the game and adjust the screen resolution in the game to 800 by 600 16-bit color is OK.,You can abuse people to your heart's content.,The effect is absolutely good.,White smoke is basically ignored.。 (This is a difficult point).

Three. 1. Prefer desktop right-click-properties-settings (resolution: 800*600, 16 bits).

2. Then enter the game, the image quality is adjusted to be low, and the texture quality is low.

3 then cut out the game, then right-click on the desktop - Properties - Settings - Advanced - Monitor (75 Hz).

4Then open the "nvidia control panel" as the previous 2, find and adjust the desktop color settings, find the digital vibration control, adjust it to between 80 100, switch back to the game, and adjust the brightness to 70 to 100, depending on the individual situation.

In fact, the above 3 are all the same, the steps are a little different, I usually use the first one, the last 2 cut to cut to trouble.

It's up to someone else, and I hope it will be helpful to the landlord.

Here I am, outside the game, on the desktop, the right mouse button, there's a property, and then there's a setting, there's a color quality, it's 32-bit, and you change it to a 16-bit one, and you can see through the smoke, and it's very clear.

Seek simplicity and effectiveness.

Minimize the resolution of your computer.

No matter what graphics card, right-click on the blank space of the desktop, adjust the screen resolution, then click Advanced Settings, pop-up window, click on the monitor, change the bottom 32-bit true color to enhanced color 16-bit, and then log in to the game, settings, change the color bit to 16bit, and the brightness is 83.

Modulation 1:

1. Right-click on the desktop to select Advanced Settings NVIDIA Control Panel.

2. Follow the following ** settings.

After the setting is completed, turn on the CF one-key smoke head, enter the game Game Settings Worry-free settings Automatic settings Pull the triangle to the right, the color depth is low, the texture quality is 16, the weather effect is none, the picture brightness is 65 80, and other bullet marks or something can be set casually.

Modulation 2:

1. Open the Start Menu, Settings, Control Panel, Mouse, and remove the improvement of pointer accuracy.

2. Open the Start Settings Control Panel Keyboard and pull the repetition delay to the end.

3. Right-click on the desktop to set Advanced Settings NVIDIA Control Panel, and follow the following ** settings.

4. After the setting is completed, turn on the CF one-key smoke head, enter the game Game Settings Worry-free settings Automatic settings Pull the triangle to the right, the color depth is low, the texture quality is 16, the weather effect is none, the picture brightness is 80, and other bullet marks or something can be set casually.

Please add a detailed explanation.