There is no sound in the right ear of the computer plugged into the headphones, and there is no soun

The details are as follows: 1. Headset problems.

Check if the earbuds are broken, and use another computer or mobile phone to detect if there is sound from the other earbud.

<>2. Contact issues.

1. Check whether there is any foreign object blocking in the hole of the computer headphones, and clean it up if necessary.

2. Insert the earphone into the computer headphone jack, adjust the insertion length and position, and check whether there is any sound.

3. Computer problems.

1. Check whether the sound icon in the lower right corner of the computer is turned off, and if it is turned off, turn on the sound.

2. Tap the sound icon to open the synthesizer and adjust the sound of the peripherals.

3. Open the computer control panel.

Find the Hardware & Sound menu.

4. Enter the [Hardware and Sound] interface and select [Sound].

6. Switch to Recording and check the line input.

The computer plugs in the headphones, there is no sound in the right ear, the computer plugs in the headphones, and the right ear does not declare that the headphones are in poor contact, or the headphones are broken, replace them again and try it.

Check whether the left and right channels of the computer are all turned on, whether the volume is all turned on, if there is no sound, it means that your headphones have a channel and there is a problem! Get new headphones!

In this case, you can plug it back in, the contact is not real, and there is damage to one side of the earphone, try to replace the earphone, and there is another situation that your **audio or**itself is mono, so that only one side has sound, replace a**source to try, so that the control can be solved.

Hello, it is a pleasure to serve you and give you the following answers: Ways to solve the problem of no sound on the computer with the headphones plugged in:1

First, check that the plug of the headset is plugged in correctly, and if not, plug it back in. 2.Check your computer's volume settings to make sure the volume is turned up to maximum and that it's not muted.

3.Check that the driver for the headset is installed correctly, and if there is no reader, please install the correct driver. 4.

If the above steps do not solve the problem, you can try replacing the earphones to make sure that there is no problem with the earphones themselves. Personal Tips:1

When plugging in the headphones, make sure that the plug is inserted correctly to avoid a situation where there is no sound. 2.When installing the headset driver, make sure that it is installed correctly to avoid a situation where there is no sound.

3.If none of the above steps solve the problem, you can try replacing the headphones to make sure there is no problem with the headphones themselves.

In the Control Panel - Add or Remove - Add a new program, and you're done. You deleted the sound!

The volume on the computer is not turned up. Headset issues. Junction issues. The headphone volume is not turned up. Didn't plug in the right hole.

There's something wrong with the sound card.

Is there sound without headphones plugged in.

You try to drive the sound card.