Wooden floors cannot be blistered, which mop is best for mopping wooden floors?

The floor is generally made of composite material, and there will be a waterproof coating on the surface, but the gap in the middle of the floor will have the possibility of blistering and bulging after absorbing water, so it is necessary to pay attention to the control of moisture when wiping the floor.

Here are two recommended mops, one is a sponge mop, and the other is a cotton mop, both of which have strong water absorption, the general principle is only one, in order to ensure that the floor can be wiped clean at the same time, try not to leave moisture on the ground, of course, you can also use two kinds of mop mixed to wipe the floor, the effect may be more.

1. Sponge mop

There are many kinds of sponge mops on the market, and the new mops are basically made of sponge materials, which has a characteristic that it is more labor-saving to use, and it is not as troublesome to wash as other mops, it only needs to be put in water to absorb water, and then the excess water can be mopped out of the sponge with a pulling or twisting structure.

My personal suggestion is to use this sponge mop as much as possible not to carry excess water, the standard is that the mop will not run water after lifting, and there is not too much water when squeezed by hand, use this mop to wipe the first time, and then he uses the cotton mop to drag the second time to dry the water.

2. Cotton mop

Cotton mop absorbency is the best, it has one of the biggest features, that is, it can handle stains softly, and will not hurt the floor because the surface material is too hard, for example, when we usually wear clothes, the cotton material will also give people the most comfortable feeling, the use method and the sponge mop have a little difference, that is, this mop should be kept dry at all times, and it must be dry when in use.

The order of use is to wipe the ground with a sponge mop, and then use a cotton cloth mop to fully absorb the moisture on the ground to achieve the purpose of not leaving excess water, so as to greatly avoid the deformation of the floor due to moisture.

The wooden floor is suitable for the kind of mop made of sponge glue, which is an absorbent gun that does not cause damage to the board.

Wooden floors cannot be blistered, so the kind of cotton absorbent mop is most suitable for mopping wooden floors, so that the mop will dry immediately after mopping with absorbent mops.

In general, wooden floorsNot recommendedUse a water mop. Because water can penetrate the inside of the wood, causing problems such as swelling, deformation, and cracking of the wood, and may even lead to rot of the floor.

If you need to clean the wooden floor, you can use a special wooden floor cleaning agent or a clean, damp cloth to gently wipe the key ridges. Before cleaning, you can use a vacuum cleaner or broom to remove dust and debris from the floor.

If you accidentally get water on the wooden floor, you should immediately blot the water with a dry towel or water absorber and then repair it with a special wood floor repair agent. Do not allow the water to sit on the wooden floor for too long, as it may cause damage to the heavier erections.

It is best to use a mop that does not wring out water to take care of the wooden floor.

In fact, the wooden floor can be mopped with water, and the conventional perception of the wooden floor is completely untouchable with water, but in fact, as long as it is not exposed to a large amount of water for a long time, there will be no problem.

If you want to mop with water, the mop must be mopped with as little water as possible, and after mopping, you should use a dry mop to mop again in time to avoid the floor absorbing moisture.

The service life of the floor ranges from 2-3 years to more than 50 years, mainly determined by the different materials and usage. The service life of solid wood flooring, the general service life of solid wood flooring is 10-20 years, and the service life of solid wood flooring can be extended to 50 years by improving floor installation technology. Rotten demolition.

Wood floor removal method

1. Understand the installation method of the previous wooden floor.

We observe the room to see if there are any gaps, if there are gaps, they can be removed, if there are no gaps, we have to find a special person to dismantle them, otherwise it is easy to damage the planks.

2. Start dismantling from the baseboard part.

Because according to experience, it is more convenient to dismantle from the baseboard, the baseboard is divided into two types: clamp fixation, glue fixing, the former is easier to remove, and the clip can be removed directly by warping it, for some glued baseboards to dismantle it is more annoying to mochi, you need to remove the cured glue first, and then dismantle it, when dismantling, you should be careful to scratch the floor, it is best to wear gloves to prevent hand injury, after we remove the baseboard, the floor can be removed.

Wooden floors cannot be mopped with water all the time.

Proper floor mopping and cleaning method:

Wash with clean water (mainly to wash the dust and sand particles contained in it that can wear the floor), and then dehydrate, hand twist or squeeze.

After the mop is free of water droplets, you can mop the floor and sweep it.

It is often used to mop the floor with a water mop, and no matter what kind of wooden floor it is, it will be affected.

The wood used for wooden flooring absorbs moisture and expands.

If you encounter high temperature weather or direct sunlight, it will seriously affect the life of the floor.

Wood flooring refers to flooring made of wood, and the wood floors produced in China are mainly divided into six categories: solid wood flooring, laminate flooring, parquet flooring, natural landscape feng shui flooring, bamboo flooring and cork flooring.

Types of wood flooring.

There are many types of wood flooring, so there are different ways to divide the types of wood flooring in the market.

A category: representative in the industry, such as: Icon flooring, Fillinger, Degao flooring, Del flooring, Yonglin blue leopard flooring, etc.

The second category: the representative is not strong, and the influence is acceptable, such as: Rhine Sunshine, Yangtze, Juning Flooring, Jixiang Flooring, Opai Flooring, etc.

Three categories: The quality should be okay but the brand strength is not strong.

Four categories, quality and brand are not good.

1. Can wooden floors be mopped with a wet mop? In fact, it is best not to use a wet mop for wood flooring, especially laminate flooring, because this kind of board is a man-made board, and it is processed from wood residuesBinders are also added during processing, and if you mop the floor with a wet mop, it is easy to absorb water and expand, which will eventually cause the wooden floor to warp and fall off.

What is the method of maintaining wooden floors. 1. Heavy objects are placed. The surface of the wooden floor should never be squeezed by heavy objects, such as heavy objects such as pianos or sharp furnitureIt must be laid on the surface of the wooden floor.

2. Keep it clean: Pay attention to keeping the floor clean and clean, and often use a vacuum cleaner to suck up dust and small debris, especially hard particles, otherwise it is easy to scratch the wooden board when walking.

3. Pay attention to humidification. Wooden floors can be neither too humid nor too dry, so it is best to add some humidity to the room during the dry season, such as putting a basin of water in the room, or buying a humidifier to humidify the wooden floor. In addition, it is best to close the doors and windows during the rainy season to avoid moisture on the floor.

Wooden floors can get damp when they come into contact with water. will deform the floor. Bending and cracking.

Can't use a wet mop for wooden floors? Expert: Mopping the floor learns this trick.