-
Out of the mud without staining, I think it should be planted in the soil, but at least it should be combined with water, it is best to breed with water tanks, and it is recommended to control the temperature and humidity.
-
Lotus, sex prefers relatively stable calm shallow water. The water requirement of the lotus depends on its species, but it cannot exceed the water depth of 20-60 centimeters for the small plant shape. At the same time, lotus flowers are very sensitive to water loss, lotus flowers are also very light-loving, lotus flowers are extremely shade-tolerant, and they will show strong phototaxis when they grow in semi-shade
-
Put 1 3 of the soil in a container, bury the lotus seeds in the soil, and then put 4 5 of the water in a sunny place.
-
How to keep lotus flowers at home:
1. The lotus root is placed flat or the top is inclined downward to 20 to 50 degrees, and the mud is buried along the inner wall of the container, so that the tail end is exposed to the outside of the mud. One piece per potted plant is sufficient. It should be slightly dried and fixed after the lotus root is fixed and then added with water. If planted with lotus seeds.
2. After the temperature rises and stabilizes, the end of the concave point is worn on the cement floor or broken with a vice, soaked in warm water at 20 to 30 degrees, the water is changed once a day, the germination is produced within a week, and the floating leaves take root after two weeks.
Bury stupid macro 3, the root can be transplanted when 10 cm, planting pots, plus bent water below the submerged small lotus leaves for the degree, indispensable file loss of water, once planted, can bloom that year.
4. The initial water of potted lotus should not be too much, and the water depth should be kept at 3 to 5 cm, and shallow water can increase the temperature of the pot mud and promote the growth of lotus. As the temperature rises, the water depth should be kept at 16 cm after the standing leaves come out of the water, and no water loss should be lost. In late autumn and early winter, the lotus enters the dormant period, so it is not necessary to add water frequently, just keep it shallow.
In late October, when all the standing leaves are yellow, they must be moved indoors or buried in the soil with side pots for winter.
-
Breeding lotus can choose loose fertile, good permeability of clay soil, receive more than 8 hours of sunlight every day, water the lotus every day in summer, keep the soil moist in winter, fertilize the lotus once in 15-20 days during the growth period, and fertilize once a month during the dormant period.
1. Soil requirements
Lotus prefers clay soil, when breeding lotus, you can dig a little pond mud from the pond to cultivate, you can also use sand, loess, humus soil according to the ratio of 3:3:4 to prepare a nutrient soil, and to do a good job of soil disinfection, you can also add bone meal to the soil, to help lotus grow better.
2. Lighting conditions
The growth of lotus flowers needs sufficient sunlight, if you want the lotus flowers to bloom more lushly, you need to provide it with more than 8 hours of sunlight every day, you can not place the lotus flowers in a cool place for a long time, insufficient light will cause the stunted development of the lotus, resulting in small buds and not bright enough color, and will shorten the flowering period of the lotus.
3. Fertilization method
Lotus is also a kind of aquatic plant that likes fertilizer, the consumption of nutrients during the growth period and flowering period is relatively large, it needs to be fertilized once every 15-20 days, to supplement nutrients for it, after entering the dormant period, it is enough to fertilize once a month, too frequent fertilization will burn the roots of the lotus, reduce its nutrient transmission capacity, and affect flowering.
4. Pruning skills
The lotus has a greater demand for nutrients, and the number of lotus flowers in a pot is too large, and the nutrients will not be uniform enough, so it is best to raise only one lotus in a pot, if there are yellow branches and leaves, it needs to be removed in time to avoid falling into the water after decay to destroy the clean water quality, affecting the growth of the lotus.
-
Breeding lotus can choose loose fertile, good permeability of clay soil, receive more than 8 hours of sunlight every day, water the lotus every day in summer, keep the soil moist in winter, fertilize the lotus once in 15-20 days during the growth period, and fertilize once a month during the dormant period.
1. Soil requirements
Lotus prefers clay soil, when breeding lotus, you can dig a little pond mud from the pond to cultivate, you can also use sand, loess, humus soil according to the ratio of 3:3:4 to prepare a nutrient soil, and to do a good job of soil disinfection, you can also add bone meal to the soil, to help lotus grow better.
2. Lighting conditions
The growth of lotus needs sufficient sunlight, if you want the lotus to bloom more lushly, you need to provide it with more than 8 hours of sunlight every day, you can not place the lotus in a cool place for a long time, insufficient light will cause the development of the lotus, resulting in small buds and the color is not bright enough, and it will shrink to talk about the flowering period of the short lotus.
3. Fertilization method
Lotus is also a kind of aquatic plant that likes fertilizer, the consumption of nutrients during the growth period and flowering period is relatively large, it needs to be fertilized once every 15-20 days, to supplement nutrients for it, after entering the dormant period, it is enough to fertilize once a month, too frequent fertilization will burn the roots of the lotus, reduce its nutrient transmission capacity, and affect flowering.
4. Pruning skills
The lotus has a greater demand for nutrients, and the number of lotus flowers in a pot is too large, and the nutrients will not be uniform enough, so it is best to raise only one lotus in a pot, if there are yellow branches and leaves, it needs to be removed in time to avoid falling into the water after decay to destroy the clean water quality, affecting the growth of the lotus.
-
1. Water quality requirements: In the early stage of lotus growth, the water layer is controlled at three to four centimeters, and the soil in the pot is selected from lake pond mud or humus humus. 2. Plenty of sunshine
The lotus flowers are cultivated outdoors to provide more than eight hours of light per day. 3. Reasonable fertilization: Fertilization should be applied throughout the growth stage of domestic lotus.
4. Watering method: watering once or twice a day during summer maintenance.
1. Water quality requirements
Lotus is an aquatic plant, the growth period is inseparable from water at all times, domestic lotus should pay attention to the height of the water layer, the early stage of growth, the water layer is controlled at three to four centimeters, the summer lotus flower is long-term, the pot is indispensable for water, and the soil in the pot chooses lake pond mud or humus humus.
2. Plenty of sunshine
When cultivating lotus flowers at home, it is best to put them outdoors or on the balcony, because lotus flowers like a sunny environment, at least eight hours of sunshine a day, long-term shade or no sunlight position, the plant is not easy to flower, and when the sun is too strong in summer, it can be moved indoors for a short period of storage.
3. Reasonable fertilization
When raising lotus at home, the fertilizer required for each growth stage is different, when the lotus is put into the pot, it is necessary to use the farmhouse fertilizer to make the base fertilizer, and when the plant is planted for a month and the long leaves are drawn, apply the well-rotted and diluted soybean cake fertilizer or farmhouse fertilizer, and apply phosphate fertilizer once a week during the flowering period.
4. Watering method
Lotus likes water, in addition to the roots can not lack water, also need to regularly water the plant, the summer weather is hot, the lotus has a large demand for water, need to water once or twice a day, if the water quality in the pot is poor, there is a peculiar smell or turbidity, to replace in time.
-
1. Sufficient light: When cultivating lotus, it is necessary to let it receive no less than 8 hours of light every day. 2. Scientific fertilization:
During the growing season, phosphorus, potassium fertilizer or cake fertilizer need to be applied once a month. 3. Overwintering management: In winter, move the lotus to an indoor temperature higher than 10 degrees to avoid freezing to death.
4. Prevention and control of pests and diseases: ensure that the environment is ventilated and breathable, and spray carbendazim in time.
1. Sufficient light
Lotus is a sun-loving plant, it is suitable for growing in a sunny environment, when cultivating lotus, you need to place the plant in a bright environment, so that it receives no less than 8 hours of light a day, but in the summer you need to build a shade net above the lotus.
2. Scientific fertilization:
Lotus needs sufficient nutrients in the growth process, when breeding lotus, it is necessary to apply fertilizer once a month in the peak season of plant growth, you can choose rotted cake fertilizer or phosphorus and potassium compound fertilizer, and after the lotus flowering, you need to spray potassium dihydrogen phosphate on its flowers.
3. Overwintering management
The lotus flower is not tolerant to severe cold, it will die in an environment where the temperature is lower than 0 degrees, when cultivating the lotus, it is necessary to move the plant to a room with a temperature higher than 0 degrees before winter, to avoid frostbite, and to dig out the branches and leaves or roots of the lotus flower with poor growth to make it grow healthily.
4. Prevention and control of pests and diseases
When cultivating lotus, it is necessary to regularly observe the growth state of the plant, if it is found that the lotus is infected with pests, it is necessary to immediately cut off the branches and leaves of the plant infected with the disease, so as not to worsen the situation, and spray carbendazim on the lotus every other week to maintain its normal growth.
Resistant to moisture and cold, to have enough light, the first floor is not tolerant to fertilizer, as long as it is rotten organic fertilizer is not in the way, can not be on the fertilizer, easy to burn roots.
The artificial breeding of eels mainly relies on special compound feed (available on the market), and adds 50 60 grams of multivitamins (vitamins A, B, C, E) and kilograms of cod liver oil per 50 kg of special feed (cod liver oil should be stopped when the water temperature is below 20 or above 35). >>>More
Scorpions: The current problems in artificial scorpion breeding How to raise newly purchased scorpions with artificial separation technology of scorpion mothers and cubs Talking about artificial scorpion breeding and poison extraction technology - and answering the new method of scorpion disease prevention and control The experience of scorpion and soil yuan in polyculture. >>>More
The breeding of jellyfish will also vary depending on the species, and in the cultivation of aquariums, there are the following points: >>>More
The breeding method is as follows:
It is best to sell some small fish, shrimp or snail meat first, which will be more suitable for the food eaten when surviving in the wild. The water level should not exceed A, and it is better to put something like a rock above the water. Keep the water clean at all times. >>>More