How do you prune coral beans? How to prune coral beans

Pruning coral bean branches can be carried out in spring, summer and autumn every year, when pruning, you can cut off the branches and leaves of coral beans that grow poorly and too densely to help the plant save nutrients, and after pruning, you can also apply plant ash to the wound of the coral bean to help the wound heal, and you can also spray chemicals for the coral bean to restore the growth of the plant.

In the pruning method of coral beans, in addition to pruning fruit branches, old branches, and diseased branches, those branches that grow more densely should also be pruned appropriately, so as to make the plants more ventilated and conducive to growth.

1. Pruning fruit branches: The ornamental value of coral beans is mostly reflected in its fruits, so how to prune coral beans? The first step is to prune the fruit branches to highlight the fruit of the coral beans.

The method is also very simple, cut off the branches and leaves at the top of the coral bean fruit branch, so that its red fruit is more obvious, and the bright fruit is very beautiful on the branch.

2. Prune old branches and short branches.

After the coral bean fruiting period, in order to promote the growth of new branches and leaves, flower friends should cut the old branches of the coral bean short, and then cut off all the previously sick, pest-infested branches and relatively weak branches. In addition, the leaves of the coral beans were found to be yellow, and everyone should cut them off as well.

3. Pruning dense branches and leaves: In the pruning method of coral beans, in addition to pruning fruit branches, old branches, and diseased branches, those branches that grow densely should also be properly pruned, so as to make the plant more ventilated and breathable, which is conducive to its growth.

Pruning fruit branches: When cultivating coral beans, it is necessary to cut off useless fruiting branches and non-fruiting branches after fruiting to improve the ornamentality of the plant. Prune old short branches:

Remove aging and pest-infeted branches to save nutrients. Prune dense branches: In summer, overly dense branches are thinned to improve light transmission between plants.

1. Prune fruit branches

When pruning the branches of coral beans, first of all, after fruiting, the useless fruiting branches or non-fruiting branches should be cut off, so that the fruit is more prominent, improve the ornamental value, pay attention to the pruning process, to avoid damaging the fruit and fruiting branches, so as not to affect the growth of the plant.

2. Prune old short branches

When pruning coral beans during the growth period, the aging and degraded branches should be cut off to promote the germination of new branches, and the branches infected with diseases and pests should be cut off to allow the healthy growth of coral beans, and the yellowing and dry leaves on the branches should also be cut off to reduce nutrient consumption.

3. Prune dense branches

In summer, the climate is relatively hot, at this time, the branches that are too dense to grow coral beans should be cut and thinned to improve the light transmission between the plants, so that the flower buds can be differentiated and produce more fruits, and after pruning, carbendazim should be applied to the wound to help the wound heal as soon as possible.

Coral bean pruning foliage method.

In the second year of plant growth, the coral beans are vigorous and the canopy is plump, and pruning is more appropriate when the fruit is ripe. Coral bean seedlings will be topped to facilitate lateral bud stare from the middle of the main branch. When the side branches grow to 20 cm, they should be pruned again in time, leaving 3-4 buds to produce more side branches and increase the fruit set.

Coral bean trimming cahu wheel tricks.

1.Pruning fruit branches: The ornamental value of coral beans is mostly reflected in their fruits.

The first step is to cut off the top of the coral bean branches. 2.Prune old short branches:

After the fruiting period of coral beans, the growth of new branches and leaves is promoted, and the old branches, diseased branches, and weak branches are pruned. 3.Pruning dense branches:

In the pruning method of coral beans, in addition to pruning fruit branches, old branches, and diseased branches, those densely growing branches should also be properly pruned to make the plants more ventilated and conducive to their growth. 4.Pruning and flowering:

When the coral bean's spring axillary buds begin to sprout, they should be pruned. During the flowering period, some weak, dead, and old branches will be pruned to reduce nutrient consumption and make them bloom. Not all coral beans are suitable for pruning.

If the coral beans planted are only transplanted and cuttings, such plants will be very fragile and cannot be pruned, otherwise the healthy growth of the coral beans will be affected.

Temperature The "home" of coral beans is the tropical regions of Asia and the Americas, and the common characteristics of these two places are that they have plenty of sunlight all year round and a warm climate. Therefore, when coral beans come to a low temperature or even cold environment, it is inevitable that the leaves will be frostbitten, yellowing and falling off. In order to prevent freezing to death due to low temperatures, the plant should be kept indoors in a warm and sunny place in winter.

Humidity In addition to environmental factors, this plant also has requirements for the soil it uses – it is better to choose loose soil with good air circulation. In winter, we use water frequently to maintain soil moisture, but overwatering will cause the roots of the coral beans to rot, which in turn will cause the leaves to turn yellow or even fall off. Therefore, friends who plant coral beans should pay attention to the amount of watering each time and the frequency of watering.

Occasional loosening of the soil helps to drain the soil.

1. Proper fertilization. Fertilization helps the plant grow, and it is advisable to apply liquid fertilizer once or twice a month.

2. Don't water frequently in winter. You can wait for the surface of the soil to dry completely before watering, and it is not advisable to water too much, and the roots of coral beans should not be soaked in water.

3. Try not to have dust on the leaves of coral beans.

4. You can change the pot every three to four months, and pay attention to the choice of soil when changing the pot.

5. Friends who plant coral beans in the north can move the plants to a warm and well-lit room before the "frost", which can effectively prevent fruit drop.

6. The branches of coral beans are relatively lush, and the messy branches can be properly pruned when the weather conditions are good.

Don't think that the coral beans you raise are all losing their leaves and that this is normal. Coral beans should not lose their leaves even in the cold winter, but if they do in this case, they are not well cared for. That is, the temperature of the growing environment is too low or caused by excessive watering.

The method of growing coral beans is very simple, first of all, to ensure sufficient nutrients, especially during its growth period, it needs to be given enough fertilizer, thin fertilizer can not be applied diligently. Its best growing environment is 18-25, it needs to be cooled in summer and kept warm in winter, and it is maintained indoors as much as possible in winter and summer. It prefers semi-shaded and astigmatism environments, and daily maintenance pays attention to shading and avoiding direct sunlight.

1. How to raise old piles of coral beans.

1. Fertilization: During the maintenance of coral beans, it is necessary to give it sufficient fertilizer, especially in its growth period, try to apply fertilizer 2-3 times a month, when fertilizing it, you can not apply raw fertilizer, you must use fully rotted fertilizer, thin fertilizer is applied frequently, otherwise there will be a danger of burning roots.

2. Temperature: The best temperature of its growth environment is 18-25, and it is necessary to pay attention to cooling down when the temperature is high in summer, and move to a cooler position indoors for maintenance, and the same is true in winter, so as to avoid long-term outdoor maintenance and frost damage.

3. Light: Coral beans like to grow in a astigmatism environment, and they need to be shaded for maintenance every day, avoiding direct sunlight, especially in summer, as exposure to the sun will burn its leaves. It can be given plenty of light in winter, and the sun is relatively mild in winter.

2. What to do if the leaves of coral beans shrink.

The shrunken leaves of coral beans are generally caused by inappropriate water, temperature and light, and there are many such cases in summer, so you need to pay more attention to watering in summer to ensure that the potting soil is slightly moist and avoid watering during the high temperature period at noon. Try to breed it in a cool and well-ventilated location to avoid dehydration due to high temperatures.

Before sowing, the seed umbilicus must be found on the seed, and the seed umbilicus must be facing down when sowing, otherwise the radicle will grow upwards after germination and burrow into the soil surface and die, and the hypocotyl and germ will grow downwards and rot. Do not cover the soil too deeply, this is because the seed shell does not fall off after the germ germinates out of the soil, if it is sown deep, the seed shell can not come out, and the cotyl will also be rolled up in the soil, so the seed surface and the soil surface shall prevail when planting. The sowing spacing shall not be less than 5 cm in order to facilitate the seedling, and the seedlings should always be kept moist after planting, and it is best to cover the glass before the seedlings emerge, and the soil temperature shall not be less than 15t, and the seeds that still do not emerge after 60 years of death indicate that the germination power has been lost.

Coral beans are native to tropical regions of the Americas and Asia, and prefer warm, moist, sunny environments and are suitable for growing in fertile, loose, well-drained soils. Coral beans grow vigorously, have strong adaptability, and are easy to propagate and cultivate, and are often sown and reproduced.

Generally, it can be between 1000-1500 times, and it will slowly adapt to the sun and thrive after ten days and a half months. Fertilizer: Fertilizer is a no-no for any plant.