How to clean the dust of the computer radiator, how to clean the dust of the laptop heat vent

First, remove the heatsink from the motherboard, pay attention to the direction of rotation of the screws (pins), and if necessary, remove the motherboard from the inside of the chassis first. Some radiators will have a backplate, pay attention to the installation of the backplate.

The fan of the radiator is generally stuck in the heat sink by shock-absorbing rubber nails.

The card slot is secured, and the radiator fan is carefully removed. Use a brush to remove dust.

The fins are also cleaned with a brush and, if necessary, with a hair dryer.

Small brushes can go deep into the crevices to clean, but the speed is slower, so it is recommended to use large and small brushes to complete this job.

Once the cleaning is complete, place the silicone grease on the base of the radiator.

Clean it up, apply new silicone grease, install it in place, and plug in the power cord.

The computer radiator is composed of three parts: the radiator base, the heat sink, and the fan, which is divided into a push-down radiator and a heat pipe radiator. Generally speaking, the push-down radiator is more suitable for use in a small host, and the heat dissipation effect is poor, but the volume and height are smaller. The heat pipe heat sink is heated through the heat pipe base through the fluid in the heat pipe, conducts the heat to the heat sink, and takes away the heat through the fan, which has high heat dissipation efficiency but large volume.

Blow directly from the hair dryer to the bottom, do not use cold air and hot air to look at the landlord.

To clean up the dust of the computer radiator, first remove the radiator, fan, brush it with a toothbrush, the dust on the fan, and then the heat sink is flushed with a water hose, dried, and installed.

It's better to find a professional for such a delicate thing, in case you break it, it's not good.

Given that you don't know anything about internals, there's nothing too good to suggest.

Ordinary cleaning should be possible, find a small brush (toothbrush or something) and a paper clip, the paper clip is straight, the front end is bent like a hook, and then the air outlet should be able to be found, use the brush and paper clip to clean it little by little, pay attention to the paper clip do not fall in.

If you feel that the effect is not good, you can try to pad it higher when you turn it on, so that the air inlet is good.

It's not possible to find a place to repair the computer or go to the place where you buy the notebook, they have a special person to take it apart and clean it for you.

What should you do to clean the dust of the laptop heat vent, so how to clean the dust of the laptop heat vent? The following is my collection of how to clean the dust of the laptop's heat vent, I hope it will be helpful to you

Unplug the laptop and deduct the battery.

Remove the screws on the back cover of the cooling fan and remove the back cover.

After removing the back cover, you can see a thermally conductive copper tube, which controls heat dissipation, and connects it with the fan to remove the screws that fix the CPU and graphics card.

Take out the heat pipe and fan, and unplug the power cord of one of the fans.

After taking out the fan, clean up the dust in the fan, you can use a blower to blow it, and if there is dust at the heat dissipation port, use a brush to brush it.

Summary. 1.First, remove the heatsink from the motherboard, pay attention to the direction of rotation of the screws when disassembling, and remove the motherboard from the chassis if necessary.

2.Then, before removing the fan of the radiator, gently wipe the dust off the fan blades with a small brush. If necessary, you can also use a hair dryer to blow dust off the blades.

3.Use a fine brush to clean up the small dust in the crevices and gently wipe it again with a clean paper towel or rag. 4.

Once the cleaning is complete, clean the silicone grease from the radiator base and apply new silicone grease.

How to clean up too much dust in the computer radiator.

Can you add, I don't quite understand it.

1.First, remove the heatsink from the motherboard, pay attention to the direction of rotation of the screws when disassembling, and remove the motherboard from the chassis if necessary. 2.

Then, before removing the fan of the radiator, gently wipe the dust off the fan blades with a small brush. If necessary, you can also use a hair dryer to blow dust off the blades. 3.

Use a fine brush to clean up the small dust in the crevices and gently wipe it again with a clean paper towel or rag. 4.Once the cleaning is complete, clean the silicone grease from the radiator base and apply new silicone grease.