There are no walls on both sides of the entrance door, how to make a shoe cabinet?

Buy a shoe cabinet and place it against the wall, so that not only do you have a place to put your shoes, but it will also make the house not too crowded.

There is no wall to fit a shoe cabinet in the middle of the wall, which is small but sufficient.

You can choose a folding shoe cabinet, which takes up very little space and is also more stylish.

You can use an open shoe cabinet on both sides of the door or one side to separate a hallway area, which can not only achieve the division of the area, but also not look crowded visually.

Install the recommended shoe rack on the entrance door. This can also be used to place a few pairs of shoes that you usually want to change, and you can hang clothes or bags on them. It's just that it's easy to bump into the door.

You can consider making a shoe cabinet at the end of the side aisle, making a shoe cabinet in a large area has little impact, and it is also convenient to make a shoe cabinet on the side of the aisle, and you can consider mirrors, hanging clothes, stools or decorative racks and other wall designs in the aisle. It is recommended to make a shoe cabinet with side holes and partitions, so that it can be adjusted according to the season, for example, the height of boots can be achieved by removing one or two layers of boards.

Wooden shoe rack, this shoe rack can be a lot simpler. The cumbersome and cumbersome that can be optimized are optimized, leaving only horizontal, vertical and vertical, which constitutes a shoe rack. However, if you put all of them in the same shoes, it will be more beautiful.

If the solid walls on the left and right sides of the entrance can be removed, then half of the wall can be removed, so that the outside entrance door cover can be added.

The position of the door sleeve line can make a tipping shoe cabinet or a normal size shoe cabinet; You can also use a wall-mounted shoe rack, which can be installed on the wall of the entrance door or entrance hallway. The shoe rack can be installed in such a way that the wall can be protected by stickers.

<> there are stacks on both sides of the door, but the stacks are relatively small, we sometimes choose to move the door to the side, so that although the door is a little biased, but the space of the shoe cabinet is let out. If you enter the entrance hallway.

The walls on both sides are not load-bearing walls.

You can consider taking out a part of the wall to increase the space of the entrance hallway, and the wall structure must be considered when digging holes in the wall, so as not to destroy the load-bearing structure of the original wall. Make full use of the space in the corner, the narrow entrance stool is easy to enter and exit and change shoes, and the hook can be used to put clothes, bags or something, which is basically enough for one person, and this design is very suitable for a single apartment.

If the space is relatively narrow, then the most mainstream approach is to design a narrow cabinet. Others depend on personal needs and preferences. In addition, if you are targeting both sides of the door and there are walls horizontally, you can make a shoe cabinet directly on either side of the left and right sides.

For such a house design, you can make the shoe cabinet built-in. Insert the shoe cabinet inside. This saves space and is aesthetically pleasing. You can ask the designer to take a look.

The shoe cabinet can be placed outside the door, which is also convenient. Alternatively, you can put the shoe cabinet in the living room, but I think it's better to put it outside the door.

There are walls on the left and right sides of the entrance door, so it depends on your door is open, at this time, you need to embed the shoe cabinet on the other side of the door, it will be more convenient to use, and you can put it when you open the door.

Modern families generally design shoe cabinets at the entrance, which is convenient for better storage of shoes and makes the home look neater and more beautiful. So how to make a shoe cabinet on the left and right walls of the door? What should we pay attention to? Let's learn with us.

1. How to make shoe cabinets on the left and right walls of the door.

If you enter the door, the left and right walls belong to the load-bearing wall.

If it cannot be removed, but the distance between the walls is relatively narrow, it is recommended to make a thinner shoe cabinet on the side of the wall, and the slope of the inner compartment is larger, and large-size shoes can also be placed; If the wall is far away, the shoe cabinet can be made thicker, but be careful not to affect the daily traffic, so as not to cause inconvenience in the later need to carry furniture.

2. Precautions for the design of modern shoe cabinets.

1. Capacity. If the house is larger, it is recommended to design the shoe cabinet capacity to be larger, because over time, the number of shoes will increase, and when friends come to the house, the number of people will increase, and a large-capacity shoe cabinet is a very good choice.

2. Style. The shoe cabinet is generally designed near the entrance door, it is not a single piece of furniture, its style, shape, color and the entire living room decoration are closely related, representing the owner's taste. Therefore, when designing the shoe cabinet, it should be matched according to the overall style, and should not be too abrupt.

3. Area. If the house is too small and there is no way to place the shoe cabinet, if there is a non-load-bearing wall at the entrance, you may wish to hollow out and make it embedded. It is recommended to leave the bottom of the shoe cabinet empty, and put the shoes for daily travel under the bottom, so that it is more convenient to clean.

4. Function. Due to the inconsistent height of shoe types, such as women's boots, high heels, rain boots, etc., the height of the shoe cabinet shelf should be adjusted when designing the shelf.

5. Ventilation. Shoes need to be worn on the feet, which will inevitably have some odors, and if the cabinet is not ventilated, it may also lead to the spread of germs. When designing the door panels, you may want to choose Hundred Yemen.

More breathable. <>

There are still a lot of situations like this, and most of the choices are to find someone to find a manufacturer to customize a shoe cabinet. When you do it, it's good to do one side and both sides, one is not beautiful and crowded. Second, it is not affordable, wasting energy and money.

If the length of the doorway is long, it is best to make a low cabinet and use a staircase to progress, which will feel beautiful and the storage space will become larger. On the contrary, it is more appropriate to consider making a high cabinet if it is short, and it is best to use the top, which is beautiful and practical, and can also be set up with a coat hook. In terms of color, it is best to choose some bright colors to make people feel suddenly open as soon as they enter the door.

Looking for carpentry to do, it is relatively troublesome, and you have to purchase materials by yourself, and the style is less, relatively labor-intensive, and hand-made, the master's craftsmanship is different, and it is troublesome. Choose the brand to customize, save yourself worry and trouble, set the installation is fast and convenient, and there are many styles to choose from.

You can empty the wall a little bit and install a built-in shoe cabinet on the wall, so that the installed shoe cabinet will not take up space, but also increase the wall decoration, practical and beautiful.

Throughout the renovation,The porch is an important placeBecause it is one of the most important places in the house! Not only should the decoration look good, but also the practicality.

As a rule, such a small apartment near the partition wall of the house is not a kitchen or bathroom. First of all, it is necessary to consider whether the partition wall is load-bearing or not, if it is load-bearing it does not interfere with the reconstruction of the wall, and if it is not a load-bearing wall, it can be opened. Then swap the shoes directly for the wall and include the design.

For example, as you can see in the image above, this type of room does not have space on either side after entering the house, but in the kitchen on the right, the partition wall is an unsupported wall. After passing, shoe racks can be built into the wall to make the mouth aesthetically pleasing and take up space. The shoe rack is narrow, but it's better to do nothing.

The layout looks reasonable, aesthetically pleasing, and functional.

However, the kitchen door may not have been installed properly after being removed. Actually, it's very simple, the rails of the sliding door move slightly inward and are located at the back of the shoe cabinet. There is plenty of space behind the shoe cabinet to store the sliding door, so the opening and closing is not a problem at all, and the beautiful atmosphere and walls are awkward.

A specific size can refer to the label in the drawing, which is particularly practical.

In this way, the area of the wall is fully utilized, and the limited space has a more functional and aesthetically pleasing appearance. However, as a rule, after removing the shoes, you can cover the back of the shoes with a cement slab, which is usually 1-2 cm thick, but it can be flattened.

Decoration is a big event that cannot be ignored, and the difference lies in going to other consumption, that is, spending money and bothering. The design of the shoe cabinet at the entrance is extremely importantEveryone must design and decorate well in accordance with the above regulations.

Nowadays, urban life is very urgent, so many people design shoe cabinets in the entrance of the house. But many people may not be able to think of this aspect when choosing a house.

As a result, the entrance is relatively narrow when moving in, and it is not easy to place shoe cabinets. We first have to consider which one we want to secure, whether it is a stepped type, a cloakroom and a shoe cabinet in one, or a straight onePick upThe simplest is to consider it on a case-by-case basis.

can not choose load-bearing wall decoration, inWhen decorating the built-in shoe cabinet, we must beTo figure out what are the load-bearing walls in the home, the load-bearing walls must not be started, otherwise it will lead to the instability of the building, if the walls of the entrance are load-bearing walls, do not choose the embedded shoe cabinet design.

You can also put the shoe cabinet into the wall, which does not take up space, and is beautiful and stylish

II. II. IIGlyphsSolid woodThe storage space of the entrance cabinet is relatively small, which is more suitable for people with a small population or a narrow entrance, and can be matched with a coat rack to increase the storage capacity. The upper level of this entryway cabinet can be used as a hat and scarf, and the lower level can be used as a shoe cabinet. Install one at the lower end of the upper wall cabinetRow hooks, can also hang clothes and hats, and shoe cabinet colleagues can be used as a shoe changing stool.

The shoe cabinet can be used as a partition in the entrance design, and the upper part is opengrid, it is more convenient to place trivial items; The lower part is a cabinet with a door to store shoes and keep them tidy; The bottom is suspended design, and the slippers are placed in a humanized way. If you have an L-shaped corner space at the entrance of your home, you might as well create a corner shoe cabinet like this to dig out morePlenty of wall storage space.

The entrance is too narrow, and the wall is a load-bearing wall that cannot be opened directly, so we must consider a variety of factors when designing, including the size of the shoes must be calculated to get the shoe cabinet largeHow to put it, how much size you need, and then you try it according to those you like, and always have to think about a few more before you know which one to compareSuitable.

The floor of the room is designed in light brown color, which is very chic. On one side of the room is a white cabinet design, which looks very fashionable and chic, showing a modern design chic aesthetic. The walls are designed as white walls with bright red peonies.

On one side of the room is a black leather sofa design, which shows a chic aesthetic.

The shoe cabinet can be made under the hanging clothes, so that it does not take up space, killing two birds with one stone.

The shoe cabinet can be mounted outside the doorway or on the side of the entryway so that it does not take up space.

The shoe cabinet can be built into the wall, so that it does not take up space and is also beautiful.

The height of 1 meter 1 minus the countertop and shoe cabinet frame, the net space should be in 1 meter, the height of the inner shelf is adjusted according to the height of their shoes, generally slippers 15cm is enough, leather shoes and casual shoes generally need a height of 20cm, and the space occupied by goddess boots and boots should be between 40-80cm.

Paintings with narrow entrances can be hung on the wall or directly into the wall.

It can be installed with a built-in shoe cabinet, which can save space to a great extent.

In the case of shoe cabinets, you can open a wall and make a built-in one.

This should be designed by the family to be a little smaller or placed outside the door.

A half-height screen partition shoe cabinet can be installed on the left or right side of the account to accommodate shoes and other items. The white shoe cabinet is of exquisite quality, with simple hand-carved wireframes on the left and right sides for decorative design, and the upper surface can also be used as a storage table for key collection. The shoe cabinet is also used as a decoration partition of the house, making the division of the space more layered and green, ensuring the privacy of the internal structure space.

At the entrance hall, the dining room cabinet with shoe cabinet, card seat, table and chair are integrated, and a large number of functions are produced according to the exquisite design in the insufficient space.

The tables and chairs on the side of the room are made of white wood and become part of the dining table and chairs, and the booths are covered with light blue sponge cushions and off-white cushions. The white kitchen cabinet above the TV background wall behind the booth is assembled as a sprinkler cabinet for wine, and the middle part is covered with black and gray black and white, which can be used as an interesting wishing wall at home to enhance the challenge of the home. The dark brown wooden tables, chairs and benches have a rustic sense of rustic and retro fashion.

There is no wall up and down the door, then we can take into account the use of the entrance wall, and put the entrance shoe cabinet in one of the spaces, naturally this is a customized awe-inspiring built-in shoe cabinet, the harm to the space on both sides is not too great, this kind of method is the most often used by everyone is also the most common. The shoe cabinet is placed on the side of the entrance wall, close to the wall, reducing the total area of the large living room and the hotel, and using the shoe cabinet to create a comfortable entrance for no reason without endangering the light.

Its light, natural ventilation and total area are unlikely to change much, making it suitable for small houses. The inverted L type is also known as the shadow wall type, that is, a longitudinal wall is raised next to the entrance door, and the shoe cabinet is placed on the opposite side, resulting in a simple and atmospheric entrance area, which is more spacious and comfortable, improves the space of the design scheme, improves the storage area, and is suitable for the room type with a very large population at home. However, this type of design method is very easy to endanger light and natural ventilation, and it is necessary to add lighting effects to prevent the light from dimming and endangering the overall perception.