How to make food taste into rubber objects

You don't have to think about it, the possibility is very small, I have tried it, the reasons are as follows, first, the decomposition temperature of the flavor is very low, and the decomposition temperature of the rubber is very high, when the rubber or silicone in the process of vulcanization has decomposed the flavor at high temperature, there are residues several times, and the taste has changed, second, all the rubber itself has a taste, and the taste is not low, basically the flavor can not cover the taste of rubber, silicone is possible, but it must be vulcanized at low temperature, I don't know if our thinking is the same, Anyway, I didn't come up with it, at that time it was to develop a pet bite stick, and our idea was to make it look the same as the food, but also have the same color and a little taste, but I tried it for a long time without success.

It's a little flavorful after a long time together.

Then you can check what a certain food tastes like, and then find an organic reagent (the same taste) that you know, and add it when mixing rubber, so that the rubber will have this taste.

Agree with the statement of the third floor. Very professional. But it's not like there's no hope. There are two ways to try to solve the problem.

First: improve rubber formulations through raw materials. Put some foreign special fragrances.

Most of the common fragrances in China are used to mask the odor through the principle of physical masking. This method is not effective and incomplete. Some rubber fragrances abroad are through chemical reactions.

The effect is thorough and aromatic. At the same time, the formula and raw material selection of rubber should also be very cautious.

Second: improve through process design. It's just my personal thoughts. Is it possible to change the fine structure inside the product, and then add some solid spices to it, and as soon as you bite it, the spices will slowly overflow. Of course, this idea is bold, and the success rate is relatively small.

1 I don't understand all of them, are you trying to make something that isn't rubber smell of rubber?

Simple, put things together with tires, it should be there in a day or two, it's better to tie it up in a bag so it tastes easier, it's better not to be too long, otherwise the shoes may smell very strong, I also know how to get rid of the smell.

The smell you smell comes from the vulcanization residue of rubber products, and the smell is generally placed in a ventilated and cool place, if the smell is large, you can use rubber deodorant, which is generally sold in supermarkets.

There are three ways to remove the odor of rubber products:

1.Flavor method: Generally, some spices are added to degrade or reduce the odor of acids, alkoxy compounds and other peculiar smells produced by various rubber in the process of processing or use, and the method is effective.

2.Boiling deodorization method: It has a long history, it has appeared in the late 80s, and now some workshop-type factories are using this method (cooking the rubber products produced in boiling water) This method can remove a small part of the reclaimed rubber taste.

However, the boiling deodorization method has high labor cost and cumbersome process, and the effect cannot be sustained and the deodorization effect is average.

3.Water-based deodorant: mainly oil-based water-based agent, which reduces the taste of rubber products after neutralizing with rubber raw materials. This method is not thorough and time-sensitive, and is generally maintained within one month.

With peroxide, it can be used as a spice.

Go to the store and buy a rubber deodorant.

Slice the lemon or diced willow and only half a small piece is sufficient.

You can also dip a towel in diluted vinegar to remove the rubbery smell.

Put it in the oven and bake it, and then take it out to cool down, and the smell will dissipate.

You can buy some activated carbon, the cost is not high, and it can also be deodorized for a long time.

Wash thoroughly with 84 disinfectant, and then go outside to expose to the sun for two days in good weather to accelerate the release of toxic substances and odors inside.

Soak it in laundry detergent water for a day to get rid of the smell.

The most effective way is to pull those technicians of the manufacturer to beat them up, and then beat their boss! Ha ha.

When there is a rubber odor, the hydrogen peroxide can be scrubbed, and the odor will disappear after drying. Or use waste tea to send to rubber products, tea has the effect of adsorbing odor.

When there is a rubber odor, the hydrogen peroxide can be scrubbed, and the odor will disappear after drying.

All of the above methods are good, but there are easier --- hehe, let it air dry in an unmanned pantry, or use alcohol sassafrass for cheaper!

Put some mothballs. Otherwise, there will be no gasoline! Hey hey - tease you, put in the water for a while or take the tea.

Scrub the hydrogen peroxide and let it dry to make the odor disappear. Or use waste tea to send to rubber products, tea has the effect of adsorbing odor.

The peculiar smell of silicone rubber products is mainly caused by the reaction of silicone products after the reaction of accelerators and vulcanizing agents; Therefore, some silica gel product manufacturers choose relatively suitable additives for this, or add appropriate chemical additives to react them according to the odor products. Ruibo rubber products factory according to the experience summarized in the hope to help everyone:

Most manufacturers will choose flavors, masking agents, deodorants, adsorbents, and even combustion methods; However, these additives do not belong to the deodorization bar, but only mask the taste; Flavor deodorants are ineffective.

It is a masking odor mask, and there are two drawbacks to using it:

1. Produce a new and smellier smell 2. **, after a long time, the smell comes out again, because the flavor has volatilized.

There are also some domestic adsorption deodorant products, I believe that everyone has also done experiments or used such products, and the effect is not much to say. Anyway, it's not really the smell of silicone products removed.

Therefore, the key to removing the smell of silica gel products lies in the selection of silica gel raw materials and vulcanization system and process.

1.Silicone rubber raw materials and production and processing: often some silicone rubber product manufacturers add a certain proportion of recycled rubber in order to reduce costs, and also add a certain proportion of polluting operating oil; However, these must be achieved by using environmentally friendly and odorless operating oils that inhibit and degrade the polluting volatiles in the rubber regrind, and the cost will not be cheap.

Therefore, we must fundamentally solve the smell of silica gel products, and choose from the raw materials and production and processing of silica gel. For example, the oil should be one with a high flash point and no odor; Do not add reclaimed rubber; Do not use the accelerator CBS; No need for dcp and so on.

Recommended: Silicone foam raw material.

2.Vulcanization system and process: silica gel is fumed glue, mixed with odorless vulcanizing agent, and silica gel is formed after secondary vulcanization (the secondary vulcanization time is recommended to be greater than 4 hours, the temperature is about 200 degrees, and it is a vacuum oven. )

Nowadays, many plastic manufacturers will face the later sales of products affected by the smell of products in the production process, and today's multi-functional deodorizer RQT-CW-1 is a direct hit on the customer's problem.

Removal method:

1. Put it in the oven and bake it and then take it out to cool down and the smell will dissipate.

2. Pour a small bottle of hydrogen peroxide (available in pharmacies or chemical stores) into a basin of clean water, soak the rubber or plastic products, and then take them out to dry to eliminate the odor.

Rubber: Rubber is a material made of elasticity, insulation, impermeability to water and air after processing from latex from rubber trees, rubber grass and other plants. Highly elastic polymer compounds.

It is divided into two types: natural rubber and synthetic rubber. Natural rubber is made from rubber trees, rubber grass and other plants after extracting gum; Synthetic rubber is obtained by polymerization of various monomers. Rubber products are widely used in all aspects of industry or life.

For rubber products that have been formed, there is generally no way to add deodorants.

However, some rubber plate products can be boiled to remove the pungent taste. For example, EPDM materials.

Some rubber silicones are odorless and are generally used in places that come into contact with drinking water.

If you boil it, you have to pay attention to whether the rubber products are resistant to boiling, and some impure materials may be deformed after cooking, which will affect the use.

Mine too, I suspect that the rubber gasket of the water pipe joint is of inferior quality, and next time ask a plumber to judge whether to replace it.