What should I do if the gateway address is not set when I log in to the broadband?

Dear users, hello:

Control Panel - Network & Internet - Network & Sharing Center, find the network you are connected to, click on Properties and click on Protocol Version 4

You can buy a telecom mobile phone in the Anhui Telecom online business hall, and the network hall will handle the contract machine to give a high phone bill, you can buy the machine at 0 yuan, which is very discounted, and at present, a number of brands of 4G models are fully listed!

There are only a few solutions: firewall, network card, QQ port blocked, unusable **, QQ file corruption. The solution is simple

1. If you suspect that there is a problem with the firewall, turn off the firewall directly to see if the problem is solved.

2. There is a problem with the network card (first of all, it can't be on anything, not just QQ), this is the simplest, change the network card.

3. The QQ port is blocked, and there is no way to find the network manager.

4. If you use the unusable**, it's also very simple to turn it off, and change it to not use**or the same as the browser**.

5、In the case that the above methods are useless,Just try this (I don't know which master found this trick)Uninstall QQ and re** a new version,Install it in a different directory from the original。

Control Panel - Network & Internet - Network & Sharing Center, find the network you are connected to, click on Properties and click on Protocol Version 4

Use the IP address below to set up the gateway, and if you don't know what the gateway is, you can consult the broadband staff. In addition, the gateway that is common in China is:

At the same time, DNS also needs to be set up, and broadband personnel are also consulted, because the DNS server in each place is a different address.

If you have a router at home, you can use the automatic IP acquisition mode directly on your computer, and you don't need to set the IP address and gateway address. If you want to set the IP manually, you need to know the LAN IP of the router. If it is a public IP given by Telecom, you have to set it up in the router, and they will give you the gateway address, without asking again.

I don't know how to connect to your network, whether you use a wired network to access the Internet prompts that the gateway address is wrong or something else? If you are using a wireless router, you can choose to get it automatically.

In the network properties set to automatically get IP address and DNS

You can get it automatically, no need to set it up.

There are many reasons why you can't connect to the Internet, such as loose network cables, routers that are not powered on, and so on. Of course, it is more due to the system settings, such as or because the system settings can do this

1. Check the reason why you can't connect to the network through the built-in network troubleshooter of the system. On the far right of the taskbar, you can see the lack of Internet access, right-click and click Troubleshoot. The system automatically searches for issues, just click Next to review them step by step.

Sometimes it can be an IP conflict, a router connection issue.

2. Seek help from professionals.

Routers only have password recognition autodialing, but you can also set up automatic logins, but the security is not very good. 1. If it is a telecom, it means that your network is not connected, check the network, find a network administrator, and check your account and password or the number to be dialed, uppercase. 2. Check your computer system, right-click on my computer, left-click on properties, then click on hardware, click on Device Manager, and see if there is a yellow question mark, whether there is a problem with the network card.

As long as the gateway is not modified, it is the default, it may be that there is a problem with your system or it conflicts with anti-virus software, I am a network technician, and I am looking for me if I can't do it.

IP and gateway are all the same, set it to 0 and try!

1 All should have the following possibilities:

1。You don't configure DNS, click Start - Run - Enter cmd - Enter ping (Shaanxi's DNS) You see if it's through, if it's through, it proves that you haven't configured DNS correctly, refer to the configuration of the one that can access the Internet normally, if not, look down.

2。Your adsl is not configured correctly, log in to the gateway, click Basic Configuration-ADSL Configuration-Configure Mode to all, drop down to select, save, restart. (Premise, other configurations have been completed).

3。Unicom's "family 1+1 gateway" has the function of routing,But it should be shielded at the factory,It is recommended to use unlocking software or other cracking methods to contact the shield,Otherwise, you have to buy a new router or switch。。。

If it doesn't work, you can m me...

The narrative is complex, and the reason is simple. The root cause of the problem is that you have a ** line, and then followed by two ADSL cat devices, and at the same time with the "same" account to log in to the Internet, you think, if this is feasible, then there is no need for any routers, switches, etc. to do network expansion, moreover, the use of ** online network form, theoretically speaking, is called "line switching", a line or a port only recognizes an IP address or strictly a MAC address, so, Your method is not viable.

Here's how to fix it:

1. Use Tietong's ADSL cat and small router, and connect the computer in each room to the router's (four) intranet ports (LAN).

2. I don't know what form of your Unicom gateway is, if it has a router function and if the number of ports in its intranet is enough, then the outer line is directly connected to the Unicom gateway, if the number of ports is not enough to be allocated, add a small 8-port switch (dozens of yuan) to connect each room after this gateway.

China Unicom is sending a broadband router! You can directly plug the import into your 1 without the other routing function and use it as a switch! But every machine needs to dial up to connect to the Internet! I also sent one!

The best way to detect is to swap the two machines at home, if there is still the same problem of poor rent, then it is a problem with the computer network connection settings or network card, you can view the local network connection information, as shown in the figure.

The main companion is to check whether the IP address setting of the local connection is consistent with the default gateway of the route (if it is automatically obtained IP, you can click the details option to view), if there is no problem, then consider the hardware problem. One is the problem of network cable, you can change a network cable or connect to another line to use, and observe whether the same problem will occur; The second is the problem of the router port, which can be tested by changing the port. If it doesn't work, it is recommended to test it with a different network card.

Hope it helps.