What is the reason for the error number 718 when I connect to the broadband?

When your Unicom broadband Internet connection shows "Error 718", if there is a router, you can power off and restart it first, if it still cannot be used, you can remove the router and perform the following tests:

1. Restart the computer and modem device;

2. Rebuild the broadband connection or set the IP in the broadband connection attribute to automatically obtain.

The error prompt is the same as 691, which is mainly displayed on the new system, such as windos7 and visto system, for the following reasons: 1 Input error, no case sensitivity. 2 Lock-in caused by overdue broadband payments.

3. After the cat is dead and restarts the connection with the computer, if it doesn't work, you can recreate the dial-up connection, which can be solved. 4 The user changes the computer or reinstalls the computer system.

Meaning of error 718:

The remote computer timed out without responding when verifying the user name, which is a connection timeout waiting for the remote computer to respond effectively.

Causes of Broadband Connection Error 718:

The PPP session is started but interrupted because the remote computer does not respond for the appropriate amount of time, either due to poor line quality or due to a failure of the ADSL ISP server, rarely a client-side issue.

Workaround for Broadband Connection Error 718:

It is recommended to dial in after restarting the computer:

1) If the fault is solved, there is no cause of the failure;

2) If the fault is still or can not be simply cooperated, you can report the obstacle to the network service provider.

If your home broadband connection cannot be used properly, you can use the following methods to troubleshoot the problem:

1.Check the modem router at home to see if the line is connected normally and whether the indicator light is abnormal, and it is recommended to plug and unplug the line and restart the device.

2.Check whether the broadband account has expired and whether it is suspended due to arrears.

Broadband connection error 718 means: A connection timed out waiting for a valid response from the remote computer.

Fault Description: The connection timed out waiting for a valid response from the remote computer. The PPP session was started, but it was interrupted because the remote computer did not respond for a suitable amount of time. This can be due to poor line quality or server issues.

Ordinary broadband and fiber broadband processing steps: Check the dial-up software for checking, and there may be no messy orange with capitalization and suffix when entering. If you have the wrong password, you can log in to the online business hall to reset your password in order to ensure information security.

It is also possible that your dial-up software has been modified incorrectly, please delete the dial-up software and reinstall it, and try to see if you can access the Internet later. If it does not work after reinstallation, it may be a computer malfunction, please find a friend or professional who is familiar with the computer to check the computer.

Error 718 is usually waiting for the remote computer to respond to the connection timeout, resulting in a late response to your username and password. It is recommended that you reseat the line, turn off the modem and the computer after confirming that the contact is good, it may be that there is no regular restart after long-term use, resulting in overheating or port hanging, please turn on the modem first, wait for 5-10 minutes for modem synchronization and then turn on the computer for dialing.

If none of the above methods can be solved, please follow the following methods to deal with it: please log in to the online business hall Help & Support Commonly used**,**10000 housekeeper auxiliary troubleshooting. Please log in to the online business hall fault reporting page, enter the broadband account and customer password to report the broadband failure, and the staff will contact you to deal with it after the acceptance is successful.

1.Restart your computer;

2.re-establish Unicom broadband connection;

3.Reinstall the NIC driver;

4.Reinstall your computer's operating system.

If the above simple troubleshooting still cannot solve the argument, you can contact Unicom customer service to deal with it.

Error 718: This connection has been terminated because the remote computer is not responding in time due to a connection error, and the resolution is:

1. Right-click on the small computer icon on the desktop and select Manage Enter.

2. Next, you need to click Device Manager, as shown in the figure below.

3. Find the network adapter on the right and click it.

4. Next, you need to find the network adapter on the right and click on it.

5. Find the WAN MiniPort(IP) and right-click to uninstall the device.

6. Next, you need to find the base network reset Click in.

7. Finally, make a choice to reset the Strike Rock immediately, as shown in the figure below.

1. Error 718 refers to the connection timeout waiting for an effective response from the remote computer. The session has been started, but the remote computer has not responded for an appropriate period of time and is interrupted, possibly due to poor line quality or server issues;

2. Dial-up test after restarting the computer;

3. If the fault is still there, you can call ** to the customer service for obstacle review.

718 The connection timed out waiting for the remote computer to respond effectively.

If the signal light is not on, it means that there is a problem with the network line, we can unplug the network cable, turn off the router and wait for about 10 minutes, replug the network cable, power on the router, and see if it returns to normal.

If it still doesn't work, it may be that the crystal head of the network cable is broken, just replace the crystal head, if the router signal light is still not on after replacement, we need to contact the broadband operator to deal with it.

In addition, we can check our own computer, we can do the following: restart the computer - re-establish Unicom broadband connection - reinstall the network card driver - reinstall the computer operating system.