What should I do if the water enters the mobile phone for a short time?

In this case, it must be turned off immediately, and then disassembled to dry the water. Take all the hardware apart. After the water dries, after a short period of water ingress after installation, the hardware will basically not be damaged and can be used normally.

When the mobile phone accidentally gets into the water, please don't panic at the first time. First, let's divide the situation into 3 types:

1. Fall into clean water when the power is on;

2. Falling into non-corrosive liquids in the case of power failure;

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

The first two cases have a good chance of being saved and there may be no sequelae, while the latter depends on luck. Of course, if you are unlucky, PPC will also be bad if you put it in your pocket.

The biggest problem after PPC water ingress is how to deal with it. First of all, for the 1st and 2nd cases, we must not think that the machine has been scrapped. Don't think it's already in the water anyway, so you disassemble it indiscriminately. Here are some suggestions for each situation:

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1. Power off as soon as possible.

2. Shake dry vigorously (depending on the situation, if you pick up the phone immediately after falling into the water, you can consider not throwing it dry), but don't shake off the machine, the idea is to shake out the water in the screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a table lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit after this treatment can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

1. OPPO mobile phone water repair.

OPPO is currently a popular mobile phone brand among young people in our market, if there is a problem of water ingress, it must not be turned on again, first open the back cover, put the air circulation place, do not use a hair dryer to blow, because the hair dryer will blow the water stains to other places, which may cause other parts without water will also have water, or need to take it to a professional repair shop to deal with. And the quality of the OPPO phone is still quite good, and if it is handled properly, it still won't break.

2. Huawei mobile phone water ingress repair.

As a national brand, Huawei has become a relatively popular brand in the world. Take your phone out immediately after it gets into the water, and remember not to turn it on or press the power off button. If the phone uses a removable battery, remove the battery immediately, if it is not removable battery:

To dry the water on the surface of the phone as soon as possible, put the phone in desiccant for more than 48 hours, and wait for the phone to dry before trying to turn it on. If it still doesn't work, contact customer service immediately or go to the service outlet for maintenance.

3. Vivo mobile phone water maintenance.

Vivo, like OPPO, is also the main market for young people, and its market share is also very high. If water enters the machine, the whole machine should be disassembled, and the corresponding screwdriver should be prepared before use. When removing the screen, pay attention to gently separating the chiplet connected to the motherboard from the motherboard, blow the front and back of the motherboard to ensure that there is no moisture residue, and try to blow out the water at the earpiece and buttons.

Put the disassembled phone in a dry place for about two days, and then turn it on.

The best way to dry your phone after it gets into the water is to dry it, or you can use a hair dryer to dry it. Wait until it's completely dry before turning it on. If it still can't be turned on, then you can only send it to the maintenance point to ask. Most likely, the motherboard is broken.

Find a relatively regular maintenance point, and tell the master directly: the mobile phone is flooded, how much is the cleaning, generally**40-60, boot as the standard, no charge if you don't turn it on, if you clean it or don't turn it on, then it's troublesome, you need to repair the motherboard, depending on the fault.

If the mobile phone is flooded for a long time, the mobile phone will not be opened, and the entire circuit board of the mobile phone will be blistered, and the mobile phone will not be usable.

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Mobile phone water treatment method:

1.Shut down immediately.

If the phone falls into the water, you need to salvage the phone immediately, and quickly press the power off button to turn it off, if it is a detachable phone, then we can take out the battery, memory card, etc. first. Powering off your phone first will prevent your phone's battery from being short-circuited**. If the phone is dropped vertically, it is best to pick it up vertically.

2.Remove moisture.

After the phone is scooped up, you need to wipe the surface of the phone with a clean towel first, and then wipe the earphone jack and other parts with a thin cotton swab. Don't shake your phone dry too hard, as this may allow water from the surface of your phone to seep deeper into the area.

3.Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air when using the hair dryer, and keep a certain distance between the hair dryer and the mobile phone. It is best to keep the wind blowing out of it at room temperature, do not put the air outlet directly at the phone, usually the hair dryer blows the phone for about twenty minutes.

Step 1: Power off! Power! Power!

What if you are unfortunate enough to have water on your phone and are searching for water on your computer (or someone else's). Then there is no doubt that the first priority is to cut off the power. Most mobile phones will turn on automatic protection shutdown to prevent short circuits after detecting water ingress, but if you find that your phone does not automatically turn off, be sure to force it to shut down and turn off the power first.

If the power is not cut off in time, a short circuit in the motherboard may be formed, causing serious consequences.

Step 2: Remove all external devices.

If you have turned off the power. We can remove accessories such as SIM card slots, headphones, data cables, and phone cases. One is to prevent the current at the interface from causing secondary damage, and the other is to remove things like the phone case to make the phone evaporate a larger area.

Of course, the most important thing is to unplug the headphones, especially if you are using the Type-C interface now. However, there are some that are not marked with waterproof effect, but the SIM card slot actually has waterproof rubber, in that case, the SIM card slot can also not be removed.

Step 3: Deal with water ingress from your phone.

Once you've done the pre-work, it's time for the physical work to find a direction to drain the water out, and then shake it dry, but be careful not to shake off the machine, and especially the water from the screen. If there are water droplets left on the screen, they will leave marks when they dry. In addition to spinning dry, paper towels, cotton swabs, etc. can also help absorb the water in the corners, so I won't say much about it here.

Rice can really help dry your phone, but only to help.

Step 4: Let it stand to evaporate.

After the previous step, you should no longer see any obvious water damage on your phone. If you can still see significant moisture, consider using something like a desiccant, dried rice, or even popcorn to help with dehydration (which may sound a bit funny, but it works). It is basically enough to ensure that the standing time is more than 24 hours.

If the vivo phone is flooded, it is recommended that you deal with it as follows:

1. Please try to place your phone in a dry, ventilated place and use a paper towel to blot water stains on the surface of your phone.

2. If the phone is in the power-on state, please press the power button to turn it off; If your phone is powered off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. You need to bring your mobile phone to the local customer service center for testing, and there will be professionals to help you deal with it properly. Enter the vivo official website APP--Service--My Service--Service outlets to inquire about the address of the nearest customer service outlet and **.

Shut down immediately.

Some experts remind that hair dryers are easy to blow water into the inner part of the phone, and are the "last thing you should do" to "rescue" the phone from water in.

If the phone falls into the water during charging, then the indoor power should be cut off before taking the phone to prevent electric shock accidents. Next, the owner should remove the battery, memory card and SIM card, place the phone on a dry towel or clothing, absorb the moisture on the surface of the phone, and then put the phone in a bag of rice for a day or two. Because rice can effectively absorb water, if you are lucky, your phone may be able to "wake up" when it gets water.

1. Please do not shake or shake the mobile phone frequently after the water enters the mobile phone to avoid the spread of moisture inside the mobile phone.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

The above content reference: People's Daily Online-Don't use a hair dryer when the mobile phone is flooded! An immediate shutdown is the best policy.

The best way to deal with the water after the mobile phone is to turn off the mobile phone first, then treat the water on the surface of the mobile phone, use a hair dryer to slowly dry the water inside the mobile phone, and then put the mobile phone in a dry place for a period of time after you can start it and try it, if there is indeed a problem, you can only send it for repair.

First of all, if the water has seeped into the phone, then you will most likely not be able to turn it off, and even some of the keys may fail at this time.

In addition, not all phones that have been flooded can be dried naturally and returned to their previous state of use. For example, there may be fine water droplets entering the display of the mobile phone to form water stains and mist on the screen, which will affect the display clarity of the mobile phone.

The biggest disadvantage of this method is that the waiting time is too long, as short as one to three days, and there are versions online that can be aired for a week or a month.

If you use a vivo mobile phone, the liquid inlet treatment method of the mobile phone is as follows:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and come in to suck out the water in the gap; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera facing upward;

5. Bring your mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct professional testing. Customer service center address: Enter the vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the bottom--service support--service network inquiry--select the province and city to query the customer service center address.

It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

**Link.

Water or falling of the mobile phone is an important cause of the failure of the mobile phone, because the internal components of the mobile phone work relatively stably and the working voltage and working current of the mobile phone are relatively low, and the internal components of the mobile phone will not be burned out. So what should I do if my phone gets into water? Next, I will introduce you to the method of rapid treatment of water ingress in mobile phones, let's take a look!

Tools Raw Materials:

Mobile phones, hair dryers.

Handle it yourself:

1. Power off as soon as possible. It is quite serious for the mobile phone to be damaged by water and other hardware such as the motherboard, so we must cut off the power as soon as possible. Note that the power failure here is not to press the power off button, but to directly deduct the battery to avoid the phone being powered on.

2. Shake off the water vigorously. If you find that there are water droplets on the screen, you should shake it off vigorously, otherwise when it dries naturally, it will leave marks on the mobile phone screen and affect the appearance.

3. Dry with a hair dryer or naturally. Many people are not in favor of using an electric hair dryer because a strong heat source will deform the motherboard, as long as you don't get anxious, keep the hair dryer away from the phone. If you choose to air dry, you usually have to wait 2 to 3 days.

4. Install the battery for testing. It's best to be patient and don't try it until it's completely air-dry, otherwise you will burn out the motherboard.

The situation of taking it to the repair shop:

1. After the above treatment, the machine cannot be turned on. Then it is very likely that the hardware of the mobile phone has been damaged, so take it to after-sales repair. But if the motherboard burns out, the repair is generally not worth much.

2. Fall into dirty water or strong corrosive water. Notes:

Overheating the hair dryer will deform the motherboard and the corrosive substances will be washed away with alcohol.