What should I do if my phone gets water? What should I do if my phone gets water?

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.

1.Turn off the power as soon as possible and turn off the phone to ensure that the water does not damage the running hardware.

2.Shake it dry again to shake out the water in the screen, and there will be traces of water droplets left on the screen.

3.Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate, this process should last for more than six hours, and do not rush to use a strong heat source such as a hair dryer.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

What should I do if my phone gets water? You must know this first aid method!

If you are using a vivo mobile phone, the liquid inlet treatment method of the mobile phone:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo**app--my--outlet query or vivo official website web version--scroll bottom--service support--service network query--select the province and city to query the customer service center address.

Let's start by popularizing the three ways to remedy mistakes

Never use a hair dryer to dry it

Many friends may have heard that after the mobile phone falls into the water, use a hair dryer to dry it, in fact, try not to use a hair dryer, because the hair dryer overheating will cause some components in the mobile phone to melt down.

Do not shake off moisture by shaking your phone

When the mobile phone has just been sprinkled with water or just fallen into the water, the moisture may still be on the surface of the mobile phone, and it has not penetrated into the inside of the mobile phone.

Do not place your phone after falling into the water

If your phone is falling straight into the water, or only the bottom half of the water is in the water, then put the phone vertically. If your phone is flat in the water, place it horizontally, not upside down.

Here's the point!

The right thing to do after your phone gets into the water

The first trick: "paper towel + cotton swab" water absorption method

After the mobile phone enters the water, the most direct and effective way is to use the paper towel and cotton swab to absorb water, the paper towel is responsible for a large area, and the cotton swab is responsible for a small area. Start by wrapping your phone in a paper towel and quickly blot the water on the surface. After that, use a thin cotton swab to clean the earphone hole, charging wiring hole and other parts to avoid external moisture penetration.

The second trick: rice water absorption method

Rice may seem common and inconspicuous, but it also has a powerful dehumidification and water absorption function! Stuff the watered mobile phone into a bag with rice, seal and store it for more than 24 hours, as long as the mobile phone is not in water for a long time, it can be restored to use and turned on normally.

The third trick: desiccant water absorption method

Usually, you can prepare some desiccant or drying box in case of emergency. There will be some small packets of desiccant in some of the goods I usually buy, which can be used, collect these small packets of desiccant, and then seal the soaked mobile phone with them, the effect is very good

Hello, when the mobile phone enters the water, first shut down immediately to avoid the result of burning the motherboard, and then quickly wipe it with a clean towel, and then use a hair dryer to dry the inside, pay attention to the distance between the hair dryer tuyere and the mobile phone to be farther away, if the amount of water is large, it is recommended to send the mobile phone to the after-sales maintenance office for inspection and repair.

Under normal circumstances, as long as it is dried, the mobile phone can be used normally, if it cannot be used normally, it can only be taken to the mobile phone repair shop.

If the mobile phone is flooded, first of all, do not turn it on, take out the battery, clean up the inside of the mobile phone, and then turn it on.

Step 1: Shut down.

After picking up your mobile phone, you should press and hold the power button to turn off the power button as soon as possible, because water will slowly seep into the circuit, and it is easy to cause the mobile phone to be short when it is turned on.

Step 2: Ventilation.

In order to avoid more damage to the phone, quickly wipe the moisture on the phone with a paper towel, and do not let go of the charging port and earphone port, then take out the SIM card and memory card, and place the phone in a dry and ventilated place. The "put the mobile phone in the rice to dehumidify" circulated on the Internet, or try not to be gullible In case the mobile phone is not saved, the charging port is also blocked by the rice, and the gain outweighs the loss However, in case the moisture in the mobile phone is not cleaned up, it may cause damage to the mobile phone device after turning on, in order to reduce the risk, it is better to go to the after-sales inspection Kangkang

The third step is to go to after-sales.

If the phone is flooded with a lot of water, or other mixed liquids, such as seawater and vegetable soup (salty liquids), even if it dries, it will still accelerate metal corrosion after being wet, and must be cleaned up

The question doesn't turn on.

At this time, you should quickly pick up the mobile phone and wipe it with a paper towel and absorbent towel, especially the earpiece, charging port, headphone port and other places that are easy to enter the water, and then pick up the hair dryer to dry any detail, don't think about throwing the water hard, throwing the phone hard is thinking about throwing the water out, and the water will be thrown into the phone.

Unless you know how to fix it, send it to a phone repair shop and have someone help wipe it with alcohol, because there is limescale in the water, which can corrode the circuit board even if it dries.

If the mobile phone can be used normally, then there is no need to worry, otherwise, you need to turn off the mobile phone and send it to the remaining cover maintenance point.

If you are using a Huawei mobile phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Boarding service. Repair spare parts** inquiry.

Make an appointment for service.

How to treat water ingress into mobile phones.

1.Shut down immediately.

If the mobile phone falls into the water, you need to salvage the mobile phone immediately, and quickly press the power off button to turn off, if it is a detachable mobile phone, then we can first take out the battery, memory card, etc., and first power off the mobile phone to prevent the mobile phone from being caused by a short circuit. If the phone is dropped vertically, it is best to pick it up vertically.

2.Remove moisture.

After the phone is scooped up, you need to wipe the surface of the phone with a clean towel and other items, and then wipe the earphone jack and other parts with a fine cotton swab. Do not shake it dry too hard, as this may allow water from the surface of the phone to seep deeper into the area.

3.Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air in the process of using the hair dryer, keep a certain distance between the hair dryer and the mobile phone, it is best to let the wind blown out of it be close to room temperature, do not direct the air outlet of the hair dryer to the mobile phone, usually the hair dryer blows the mobile phone for about 20 minutes.

If you use a vivo mobile phone, the liquid inlet treatment method of the mobile phone is as follows:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and come in to suck out the water in the gap; When absorbing water, try not to move your phone;

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera facing upward;

5. Bring your mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct professional testing. Customer service center address: Enter the vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the bottom--service support--service network inquiry--select the province and city to query the customer service center address.

It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

1. Wrong handling methods.

1.Use a hair dryer to dry. The first thing that many friends think of after the mobile phone gets into the water is to use a hair dryer to dry, but the fact is that blowing with a hair dryer is easy to overheat and cause damage to the internal parts of the mobile phone.

2.Shake the phone to dry the water. When the mobile phone has just entered the water, many people think that the water has not yet entered the inside of the mobile phone, so they think about drying it, but doing so is actually very easy to aggravate the failure of the mobile phone.

Second, the correct way to deal with it.

1.Wipe off surface moisture with a paper towel and cotton swab. After the mobile phone gets water, first turn it off, then use a paper towel to dry the moisture in a large area such as the mobile phone screen, and then use a cotton swab to gently absorb the water at the earphone hole, charging hole and speaker.

2.Rice and desiccant water absorption method. After wiping off the surface moisture, you also need to absorb the moisture inside the phone, if you have desiccant at home, you can bury the phone in the desiccant, if you don't bury it with rice, you can probably wait for half a day to do it a day or so, wait for the phone to dry completely before you can try to turn it on.

3.Rice cooker steaming method. This method needs to be grasped more accurately to be effective, first heat the rice cooker, then adjust to the keep warm mode, and then wrap the watery mobile phone with newspaper, put it in the rice cooker, and use a dry and certain temperature environment to evaporate the water of the mobile phone.

But if it's not very necessary, don't try it, because it's easy to burn out your phone if you don't grasp it well.

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

What do we do when we drop our phone in the water?

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not rush to use strong heat sources such as hair dryers. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

If you have poor hands-on ability, you should still repair it for a professional).

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1.Turn off the power as soon as possible.

2.If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3.Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4.Rinse with alcohol or professional washing water.

5.Assembling. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.