What are the reasons why the dust box cylinder does not work?

The reasons for the analysis are as follows: 1. Is there an air source? 2. Is there a power supply for the solenoid valve?

3. Is the solenoid valve blocked? Fourth, has the solenoid valve coil burned out? 5. Does the relay for power supply work?

Is the line open? and other reasons can cause the cylinder not to work.

In this case, it is possible that the pressure leakage is caused by a bad seal, so this situation occurs.

It may be that the diaphragm of the solenoid pulse valve is damaged. At this time, all the pulse valves of the dust collector do not work, the pressure of the air bag is rapidly reduced to zero, the cylinder is closed, the pressure difference of the dust collector continues to increase, and the ventilation volume is rapidly reduced; If the filter bag is damaged in a small area, the rag can also be patched with a new filter cloth of the same material, and the hole filling method is to bond with silicone rubber mixture, as long as the use temperature and chemical properties of the binder are suitable for the process conditions;

Hello, the reason why the cylinder does not work is that the spark plug does not ignite or the injector does not inject oil, if these two reasons are normal, it is that the cylinder pressure is too low. Look

The aroma of Fangcheng is just there. What is the reason why one or two do not work? It may be that there is too much dust, you clean it up. Or find a maintenance person. Repair it once. You may have a lot of dust and impurities.

Remove the dust cylinder, there is a reason why it does not work so lightly, this possibility is that the cylinder is broken, so it will cause him to have not worked.

I have a dust box cylinder that doesn't work for some reason, this one is broken, and it has to be disassembled and reassembled.

The reason why Fancheng Aroma Port does not work is because of the failure, and it is best to find a professional person to deal with the maintenance.

The environmental protection dust removal cylinder does not work, which may lead to the following effects:

1.Air pollution: environmental protection dust removal cylinder is an important equipment to reduce particulate matter and smoke in industrial exhaust gas, if Nian Chi Xian does not work, it will lead to an increase in pollutant emissions in Danbu exhaust gas, which will have a negative impact on air quality.

2.Reduced production efficiency: The main role of the environmental protection dust removal cylinder is to reduce the smoke and particulate matter in the industrial exhaust gas, if it does not work, the pollutants in the exhaust gas will increase, which is not only harmful to the environment, but also has a certain impact on the production process.

For example, if the production is a high-precision product, the dirty pat will affect the quality of the product, and the production efficiency will also decrease.

3.Equipment damage: environmental protection dust removal cylinder is a kind of high-precision mechanical equipment, due to environmental reasons or long-term use will lead to equipment aging, misuse and other reasons and failure, if not repaired in time may lead to equipment damage, and then affect production efficiency and cost.

Therefore, once there is a problem with the environmental protection dust removal cylinder, it needs to be repaired in time to ensure production safety, environmental protection and work efficiency.

Summary. Yes, the low air pressure may be the reason why the dust collector cannot be lifted. Barometric pressure refers to the pressure in the air, which is determined by the temperature and density of the air.

When the air pressure decreases, the density of the air will also decrease, which will cause the dust collector to not be able to lift. In addition, the air pressure also affects the operating efficiency of the dust machine, and when the air pressure is too low, the operating efficiency of the dust filter will also be reduced. Therefore, if the dust collector cannot be lifted, it may be the reason for the low air pressure.

Yes, the low air pressure may be the reason why the dust collector cannot be lifted. Barometric pressure refers to the pressure in the air, which is determined by the temperature and density of the air. When the air pressure decreases, the density of the air will also decrease, which will cause the dust collector to not be able to lift.

In addition, the air pressure will also affect the operating efficiency of the dust machine, and when the air pressure is too low, the efficiency of the dust collector will also be reduced. Therefore, if the dust collector cannot be lifted, Zhaoxun can be the cause of low air pressure.

Can you elaborate on that a little bit more?

Reasons:1The internal filter element of the dust collector is clogged:

Blockage of the internal filter element of the dust collector will lead to poor airflow, which will affect the lifting force of the air carrier. 2.Insufficient air pressure in the dust collector:

Insufficient air pressure in the dust collector will lead to insufficient lifting force of the air carrying, so that there is no tung trapping method to improve. Workaround:1

Check the internal filter element of the dust collector, if the filter element is found to be blocked, the filter element should be cleaned in time to ensure smooth airflow. 2.Check the air pressure of the dust collector, if the air pressure is found to be insufficient, the air pressure should be adjusted in time to ensure that the air lifting force is sufficient.

Personal Tips:1Regularly check the internal filter element of the dust collector and clean the filter element in time to ensure smooth airflow.

2.Check the air pressure of the dust collector regularly, and adjust the air pressure when the local concealment is in mind to ensure that the air lifting force is sufficient. 3.

Try to avoid placing too much debris inside the dust collector so as not to affect the smooth airflow.