What are the causes of the failure of several generations of Accord 81 20?

If there is such a situation, it should be a failure of the computer version, and if it is normal, his computer board must be replaced, only in this way can a good effect be achieved, and relatively speaking, it is relatively good.

Regardless of the cause of the failure of the Accord 8 1-2 zero of any generation, it is because of one of his engine failures.

Yago, most of this failure is caused by substandard discharge, which may be related to the filter screen.

Hello, it may be that the engine is not powered enough. Go to the after-sales inspection and they will deal with it as soon as possible.

The cause of the 8120 failure is a problem with the wiring inside.

Generally, when this happens, it may be that when one of his internal machines fails, it must be repaired in time, otherwise it will definitely break.

This one can go to 4sThe store conducts meticulous search and analysis, safety first.

In general, I think there are three main types of failures.

If he is the cause of the failure of the second year, he will use you to fight me when the fault is concerned.

Other Accord help the cause of the breakdown, this you should look for some professional news, or go to the place where the car is repaired to understand.

The reason for the failure of several generations of Accord is mainly because his model is very popular, so it is very prone to a series of failures.

Hello friends, there may be many reasons for the failure of the Accord 8120, maybe it is the failure of the parts to find the maintenance personnel to check.

The reason for the expectation of the Accord's first bar 20 failure is that he automatically has a small problem, so you have to go to the 4S store to check it.

The eighth-generation Accord fault code P0172 is that the fuel system mixing ratio is too thick, that is, the amount of fuel injection is too much, if there is no oxygen sensor failure, it is the intake pressure sensor signal is unreliable, and the replacement of the intake pressure sensor can be solved, the specific operation steps are as follows:

1. Open the hood and find the pressure sensor.

2. Use your fingers to open the pressure sensor clip.

3. Unplug the sensor.

4. Unscrew the fixing screws to remove the sensor.

5. Replace the new sensors in reverse order and you're done.

The eighth-generation Accord fault code P0172 is that the fuel system mixing ratio is too thick, that is, the amount of fuel injection is too much, if there is no oxygen sensor failure, it is the intake pressure sensor signal is unreliable, and the replacement of the intake pressure sensor can be solved, the specific operation steps are as follows:

1. Open the hood and find the pressure sensor.

2. Use your fingers to open the pressure sensor clip.

3. Unplug the sensor.

4. Unscrew the fixing screws to remove the sensor.

5. Replace the new sensors in reverse order and you're done.

The car fault code content, P0172: the system air-fuel ratio is too strong.

Fault code: P0172

Chinese meaning: system (air-fuel ratio) is too strong (1st row).

English meaning: system too rich (bank 1) category: fuel or air.

What it means: Fuel trim refers to the electronic control unit (ECU) that controls fuel delivery by increasing or decreasing the injector opening time, so that the engine achieves the best air-fuel ratio (air-to-gasoline mass ratio: 1).

Too strong an air-to-air ratio means that the fuel delivery volume is too large, and an air-to-air ratio is too thin to mean that the fuel delivery volume is too small. This fault code can occur if the adaptive fuel control system has reached its compensation limit and the air/fuel ratio is still very strong. Causes of failure include failure of the intake flow sensor or manifold absolute pressure (MAP) sensor, fuel pressure is too high, fuel pressure regulator failure, fuel injector failure, oxygen sensor failure, camshaft timing error, oil overfill, evaporative discharge system error, electronic control module (PCM or ECM) failure, etc.

Summary. Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

If you query through my side, this is a VSA solenoid valve failure mainly because there is a problem with your ABS pump, generally speaking, if this fault occurs**, you can look at it through the annotation behind the decoder. You can take a picture of your fault ** and send it to Chang Slippery, and then I'll take a look at the specific situation, and if I inquire here, the result is that the state is this.

Yes, this one is that your ABS pump is broken, and you need to consider replacing the ABS pump.

The eighth-generation Accord is a relatively old model, and its 61-1 fault code may be in the following two situations:

1.Oxygen sensor coarse detector failure: The engine control system of the eighth-generation Accord has an oxygen sensor that detects the oxygen content in the air entering the engine, controls the amount of fuel injection, and consumes the least amount of fuel while the engine is running.

If the oxygen sensor fails, it will cause the engine to not work properly, resulting in a 61-1 fault code.

2.Valve Position Sensor Failure: This sensor is mainly used to control the air flow of the engine to ensure proper operation of the engine. If the sensor is faulty or the signal is unstable, it will cause the engine to not work properly, resulting in a 61-1 fault code.

If the 8th generation Accord has a 61-1 fault code, it is recommended to go to a professional car repair shop or 4S shop in time to check and repair or replace it accordingly. Through professional inspection and maintenance, the normal operation of the vehicle can be guaranteed, and the failure wave and other components can be avoided, which can lead to more serious damage.

Summary. Ten generations Accord B0028 fault code pro, hello! B0028 is a faulty wastegas valve.

Replace a new waste valve fault code is gone, and it is generally more expensive than a thousand. It doesn't matter if you don't change it, just unplug the terminal of the wastegas valve. In this way, the car is more powerful, but the exhaust may not be as good as before, and the annual review may not be able to pass.

If it still doesn't work, contact the after-sales service personnel for repair.

Ten generations Accord B0028 fault code.

Ten generations Accord B0028 fault code pro, hello! B0028 is a faulty wastegas valve. Replacing a new wastevalve with a fault code is gone, and the price of a seepage is more expensive than a thousand.

It doesn't matter if you don't change the bush and slow the ear, just unplug the terminal of the wastegas valve. In this way, the car is more powerful, but the exhaust may not be as good as before, and the annual review may not be able to pass. If it still doesn't work, contact the after-sales service personnel for repair.

Airbag. Pro, which means right side airbag deployment control (subfault). Background:

There are two main types of side airbags: side torso airbags and side curtain air pin capsules. Side torso airbags are positioned from the seat or door panels to protect the occupant's torso.

The safety protection applied to the head comes from the extension of the side torso airbag or from the overhead curtain airbag. When your car is troubleshooting, the fault needs to be cleared**. When clearing the fault, it is necessary to follow the fault clearance method specified in the specified model, and it must not be arbitrarily equipped with the method of removing the negative pole of the battery to clear the fault code.

Otherwise, it is likely that the loss of sales will cause the following two problems: first, lead to the loss of the control computer of some models of "historical record", many car owners know that most of the models of the computer is with a memory function, after removing the negative pole of the battery with the iron wire, it will automatically clear the engine operation data stored in the RAM (random memory), which is why some people find that after the maintenance is cleared, they find that the performance is not good for a long time or after driving for a while, and then the fault has been cleared ** Second, it will also cause the loss of certain functions, such as audio locking is one of the more common examples, in this case, it is necessary to decrypt the sound system through a very troublesome repair program to restore the sound.

Take a look at this.

The original function of the multiplex sound system.

19 years of ten generations of Accord, every morning cold start airbag failure light on, the car after a while to heat up after the engine turned off and restarted the fault Shenliang light disappeared, how to fool this to ruin the mountain preparation.

19 years of the tenth generation Accord fault code: B0028-1A

Hello, according to the fault description analysis, this situation is due to the loosening of the airbag harness plug when moving the seat.

Summary. Hello, happy to answer your questions.

Hello, happy to answer your questions. 【】

Hello, happy to answer your questions.

If this fault occurs**, it means that your turboshaft position sensor has no signal, in this case, you can first check whether the circuit of the camshaft position sensor is normal, if the circuit is okay, you can directly change a sensor.

Let's check the wiring of the sensor first.

There is a problem with the camshaft position sensor or there is a problem with the wiring of the camshaft position sensor.