How do I put a plant in a pot? How do you plant flowers in pots?

To plant plants in pots, the main thing is to choose a pot with a suitable volume and a suitable soil, and then plant the plant in it and water it enough.

As long as it depends on the specific situation, under normal circumstances, plants have a certain gravity induction, so in this regard, there is generally no need for such a cultivation method, which is easy to have problems.

When the plant is planted in a pot, you first find a position, first spread a layer of soil in the pot, then spread it to about 1 2 of the pot, then put the position inside, and then fill in the soil.

It's very simple to plant plants in pots, you can choose the diameter of the pot according to the size of the plant, and then prepare the nutrient soil, and put the plants in it.

How to plant plants in pots, first fill the pot with soil, then move the plants from other places, and water a little water in the pot.

The day will put the plants in the pot, first of all, watering, after watering thoroughly, one day with soil transplanting, will improve the survival rate of plants.

It's easy to pick, just put the soil into the pot 1 3, then put the flowers and plants in it, and then fill the pot with soil.

Choose a suitable pot according to the size of the plant's rhizomes. It is best to put the whole mound of the roots of the plant in the pot.

Isn't it very simple to plant plants in pots? First transplant it directly into the pot with more soil from its roots, and then water it with some water.

How to plant plants in pots, just sow them directly in pots, if you want to plant halfway, you can change the pot with soil.

If you change the pot first, it's best not to touch the original thing, and then change to a larger pot, just change some soil.

Raising a little flat planting at home can beautify life, and in cultivating sentiment, this kind of flat planting is best with soil seeds that are easier to survive.

How do I put a plant in a pot? Wouldn't it be okay to just plant the plant upside down in a pot?

Planting the plant in a pot, except that you can send it back to the picture, or something, dig it up with the wave and pick it up during the day.

It is best to choose the kind of strong and stiff branches for directly cut rose branches, and you can choose to transplant and sow seeds.

First of all, if you have the conditions, you can buy some rooting powder and soak the branches for about a few hours, about five hours, so that it is easy to take root and sprout.

Then the leaves at the bottom of the branches are cleaned, and the mouth of the branch inserted into the soil is cut into a beveled opening. Secondly, prepare the soil.

It is best to choose a fertile and delicate sandy soil, which must have good air permeability. You can buy ready-made ones or make them yourself. After inserting the rose shoots into the soil, water them a little, keep them moist, and leave them in the shade for about 15 days before being exposed to sunlight.

If you make that kind of nutrient soil, it takes a long time, about a month.

First find a box on it, find some fertile soil in the vegetable garden and put a little mud and sand on it, help the unwanted vegetable leaves and so on to spread on the soil, cover it with a layer of soil, and finally seal the plastic bag and dry it in the sun. A few days to put a layer of vegetable leaves, and then cover a layer of soil, so that the cycle, about 1 month, the nutrient soil is almost good.

A tube can be inserted at the bottom of the box to facilitate the drainage of stagnant water. Then pour out the nutrient soil in the box, add some ordinary soil and mix it together, this is the nutrient soil that can be planted directly.

1. Prepare tools: prepare small shovels, gloves and transplanted flower pots in advance;

3. Loosening the soil: loosen the soil with a small shovel prepared in advance around the flower pot wall, try to rely on the flower pot wall and do not hurt the root of the flower, when the soil around the flower pot is loosened, the soil that falls off is taken out, and the gap around the flower pot wall is deepened again;

4. Take flowers: The flower pot is turned in the air, the bottom of the pot is facing up, one hand drags the soil block, one hand gently knocks the flower pot around, and then slowly takes off the flower pot with one hand;

5. Turn over the soil block in your hand gently and slowly rotate until the flowers are facing up, and put it into a new flower pot, dismantle and then fill the soil.

Family flowers, 2 "little tricks", dozens of pots of flowers are well raised, and the leaves are green and beautiful

Clause.

1. Sand raises flowers

How to raise tweed in sand, if it is fine sand, it is ordinary river sand, we can find some, and then on the surface of the pot, the surface of the potting soil, spread a thin layer on it, about two centimeters thick, especially the potted flowers raised indoors.

Spread fine sand on the surface of the pot to prevent small flying insects

What is the effect, because this sand spreads the surface of the potting soil, which can prevent the growth of small black insects and small flying insects, so that the potting soil becomes neat and clean, and it is not easy for mud to run out when watering. Even if there is a little black worm, the little black fly, after laying the sand, blocks its food**, and it can't touch the potting soil, so the little flying worm is gone.

If the potting soil is particularly cohesive, like yellow mud, it is definitely not possible to raise flowers in this way, especially like bamboo, cactus, tiger tail orchid, jasmine, etc., the potting soil is too easy to compact, which will lead to rotten roots and yellow leaves, so you can add some sand to the garden soil or nutrient soil to promote the potting soil to be more loose.

Coarse sand raises flowers and succulents

When raising succulents, if there is no granular soil, or when you don't want to buy granular soil, we can find some coarse sand left behind when decorating, that is, sand particles with a larger diameter, which are added to the soil for raising flowers, or add a small part to the potting soil, which can replace vermiculite and perlite, so that the potting soil is more breathable and drained.

1. Seed treatment before sowing

1. Generally easy to germinate seeds, you can soak them in cold water or warm water before sowing, and the water temperature is controlled below 40 degrees to make the seed coat soft or the seeds swell and sow them, such as morning glory, nasturtium, etc. Small seeds do not need to be soaked.

2. Seeds with hard seed coat, due to the hard seed coat, impermeable and impermeable, can be used to cut the seed coat, pesticide treatment and other methods. Seeds such as canna can be cut with a file or knife to cut the outer seed coat so that the water comes into direct contact with the cotyledons. Due to the absorption and expansion of cotyledons, the hard outer seed coat can naturally break and germinate quickly.

3. For seeds that require dormancy under low temperature and wet conditions, they are often treated by freezing and low temperature layering (i.e., sand storage).

Second, the sowing period

Indoor potted flowers are usually planted in the spring when the weather is already warmer. However, there are many kinds of indoor flowers, some species that bloom in winter and spring are often sown in late summer and early autumn, and those with short growth period can also be sown in late autumn and early winter.

3. Sowing

Indoor flowers are generally made of peat, 3 parts of Gaza, 1 part of sowing soil; It can also be used as soil for sowing with humus or fine sand; Now it is also possible to sow seeds directly with the purchased culture soil. Fill the pot with 8 minutes full of soil, scrape it flat and soak it in water to soak the potting soil and set aside. Small seeds, such as petunias, emerald butterflies, bellflowers, etc., should be carefully and evenly sprinkled on the surface of the soaked potting soil.

1. The timing of repotting.

It is best performed in spring and autumn; Some plants are also suitable for winter.

It is most suitable to be carried out in the dormant period and early growth stage of the plant, and the two stages of repotting have little impact on the growth of the plant.

For plants that are in the slow seedling stage, do not change, because the flower roots are already damaged, and changing at this time will cause secondary damage and prolong the slow seedling period indefinitely.

2. Steps to change pots.

Materials and tools to prepare before repotting: flower pots, culture soil, pearlstone, gardening shears, shovels, vermiculite.

Depot the plant, gently press the soil mass at the root with your hand to loosen the soil, and then sort out the roots inside the soil.

According to the size of the plant to determine the length of the retained roots, the larger the plant, the longer the roots will be retained, generally the roots of the grass flower only need to leave a length of about 15 cm, and the excess part can be cut off. In addition, the dead branches and leaves or diseased parts of the plant should also be pruned.

In order to take into account the air permeability and water retention of the new soil, vermiculite, pearlstone, and culture soil can be fully mixed in a ratio of 1:1:3 as the new pot soil.

Add the mixed soil to a new pot, about 1 3 height, slightly compact it by hand, put it in the plant, and then add the soil to 8 minutes full.

It's very simple, just plant the hydroponic spider plant directly in the pot, but you need to water it frequently at the beginning, and you can manage it normally after a period of adaptation.

Methods of raising flowers and watering at home.

Residual tea is used to water flowers, which can not only maintain soil moisture, but also add nutrients such as nitrogen to plants. However, depending on the humidity of the pot, it should be watered regularly and proportionately, and not with pouring residual tea.

Spoiled milk watering flowers After the milk has deteriorated, water is added to water the flowers, which is beneficial to the growth of the flowers. But it is better to use more water to make it more diluted. Unfermented milk should not be watered with flowers, because it produces a lot of heat during fermentation, which will "burn" the roots (rotten roots).

Watering flowers with cool boiled water Watering flowers with cool boiled water can make the leaves of flowers and trees lush and colorful, and can promote their early flowering. If it is used to water bamboo, it can make its branches and leaves develop horizontally, and it is dwarf and dense.

Watering flowers with warm water In winter, it is advisable to water flowers with warm water. It is best to keep the water indoors and wait until it is close to the room temperature before pouring it. It would be better if the water temperature could reach 35 before watering.

Rice watering flowers Frequent use of rice water to water Milan and other flowers, which can make their branches and leaves lush and brightly colored.

Watering flowers when no one is at home People who love to raise flowers, if they are not at home for ten days and a half because they are visiting relatives or going out to run errands, no one will water the flowers. At this time, you can fill a plastic bag with water, prick a small hole in the bottom of the bag with a needle, and put it in a flower pot, the small hole is attached to the soil, and the water will slowly seep out to moisten the soil. The size of the hole needs to be well controlled to prevent water from leaking too quickly.

Or put a vessel full of cold water next to the flower pot, find a wide cloth strip with good water absorption, put one end into the vessel water, and bury the other end in the flower pot soil, so that at least half a month or so the soil can be kept moist, and the flower will not die.

In the summer, if you are indoors, you should water it thoroughly for four or five days, and you should not water it and spray it occasionally.

Outdoor once every two days.

1. When potting flowers, flower friends should also pay attention to the fact that if the flower pot used at home is a newly bought clay pot, this kind of flower pot needs to be soaked in water for a period of time, and the general soaking time is about a day. When the pot is soaked, you can pot it, because if you don't soak this type of pot, it is very likely that the water will be absorbed by the pot body after watering in the later process of raising flowers. Therefore, flower friends must pay attention to the problem of flower pots, and different flower pots are treated differently.

2. Good flower soil can be said to be a good medicine for flowers, because choosing a more loose and breathable flower soil can make its growth easier for flowers. This kind of thing is also easier to find, generally like pine needles and rotten leaves, can be mixed into the flower soil, which is very helpful for the growth of flowers, of course, you can also find some other things to mix the flower soil, such as river sand soil and cinder is also very useful.

3. When flower friends pot flowers, the first step is to cover the hole of the drainage outlet with gauze or other things, the purpose of this is to prevent some insect pests from invading, once there is a pest invasion, it is very likely to hurt the root system of flowers, it can be said that there is no benefit to flowers.

4. Flower friends can spread a relatively large layer of coarse sand on it, and there are many materials, such as peanut shells and cinders are materials that can be used.

5. Flower friends can make it themselves, and then we will buy the flower seedlings into the pot, the root system must let it stretch Then, we can put some flower soil, press it solid. Leave some space for watering the flowers later.

6. After the completion of flower planting, flower friends must pay attention to the first watering, the whole flower soil should be soaked in the state, so we must pay attention to the drainage hole when watering before stopping watering, we must pay attention to the need for flower soil to dry up and then watering, the purpose of this is to prevent flower rotten roots, just after the pot of flowers, we should also pay attention to not be directly exposed to the sun, otherwise it is easy to be sunburned, put in a ventilated place to raise a few days in contact with the sun.