Win10 system boot does not have an interface to enter the password

It is necessary to set a complex security password for Windows, but the complex password also leads to the need to enter a long password before logging in to the system when booting up. Let's teach you how to cancel the login password at startup in win10, that is, how to set up automatic login at startup.

1. Press the shortcut key Win+R or click in turn.

Start Menu Button > All Apps > Windows System Run. Open the Run Command window and enter control

userpasswords2", and click OK.

2.Uncheck "To use this computer, the user must enter a username and password", and then click OK.

3.In the pop-up "automatic login" window, enter the name and password to be automatically logged in, click [OK], you can cancel the boot login password of win10, and you don't need to enter the password to log in automatically when you boot up in the future, and at the same time ensure the security of the computer facing the network.

1. Start --- run --- copy and paste command ---controluserpasswords2--- enter the account management interface;

Select Account. 2. Check the account name you want to use, and uncheck the box of "To use this computer, the user must enter the user name and password", and provide the password of the account to Windows.

Enter your password to complete the setup.

The default username for a computer is administrator. By default, computer users don't have a password unless you set one. If you don't have the settings, you can directly press the enter key to enter the system.

If you create your own new username, your original admin username won't disappear, but you'll be logged in the way you created it. Of course, you can also set the login screen, and you can change the user name through the settings. After entering the interface, you can change the user name, and then enter the password before entering the system.

Win10 set login password:1. Left-click Start and click the Settings icon.

2. Click. <>

3. Switch to "Login Options".

4. Click Change Password.

Press the key combination Windows+i to open Settings and select Account.

Select Login Options >> Password or PIN (Difference: Passwords can have letters, symbols, and PIN is a pure number.)

1. Let's take a look at the situation that the windows10 system does not appear in the login interface, after running to this interface, it no longer runs, and there is no response when you click the mouse.

2. In this case, we can directly force the shutdown three or four times, and then the system's startup settings page will appear, select the "Enable Safe Mode" item, or press the 4 keys on the keyboard.

3. The safe mode will be activated after a while, right-click the start button in the lower left corner, and select the "Run" menu item in the pop-up menu.

4. In the running window that opens, we enter the command msconfig and click the OK button.

5. In the system configuration window that opens, click the "General" tab, then check the "Normal Startup" item, and finally click the OK button.

6. After restarting the computer, you will enter the normal login interface.

I also encountered this problem just now, and it still doesn't work after restarting a few times, and I haven't found the root cause. Finally, the long press F8 on boot solves the problem.

1. Open the "Start" menu and find the "Settings" inside;

2. Open the settings interface and find "Update & Security" inside;

3. Open Update & Security, "Repair" on the left side, and click the "Restart Now" button in Advanced Startup;

4. The system automatically enters the security operation interface and selects "Troubleshooting";

5. Click "Advanced Options";

6. Click "Start Settings";

7. Click the "Restart" button in the lower right corner;

8. After restarting, press [F4] or 4 on the pop-up startup setting interface to enter "Safe Mode", so that you can log in normally;

9. Enter the system and press win+r to open and run, enter: msconfig and click OK to open the system configuration;

10. Click [Normal Start] under the regular selection card of the system configuration, and then click OK, and restart the computer to display the password input box!

My solution,Press 5 shifts or press randomly on the keyboard、Change the input method,The password input box will come out,Run msconfig after entering the system,Select enable all in the service,Apply,Then restart。

1. Let's take a look at the windows10 system if it is not defeated, it appears on the login interface, runs to this interface, no longer runs, and the mouse does not respond.

2. When this happens, we can directly force the shutdown three or four times, and then the system boot settings page will appear, select the "Enable Safe Mode" item, or press the 4 keys on the keyboard.

3. The safe mode will be activated after a while, right-click the start button in the lower left corner of the big cheat, and select the "Run" menu item in the pop-up menu.

4. In the running window that opens, we enter the command msconfig, and then click OK to press the roll family button.

5. In the "Open System Configuration" window, click the "General" tab, then select the "Normal Startup" item, and finally click the "OK" button.

6. After restarting the computer, you will enter the normal login interface.

This situation is caused by improper startup settings, and you can take the following methods to solve it.

1. First click on "Start Menu", and click on the "Settings" icon in the Start Menu, as shown in the figure below.

2. Open the Windows Settings interface, find "Update & Security" and click to enter.

3. After turning on Update & Security, click the "Restart Now" button on the left side of "Recover" in Advanced Startup.

4. The system automatically enters the security operation interface and selects "Troubleshooting";

5. Click "Advanced Options", as shown in the figure below.

6. Then click "Startup Settings" on the interface of advanced options, as shown in the figure below.

7. Then click the "Restart" button in the startup settings interface.

8. After restarting, press [F4] or 4 on the pop-up startup setting interface to enter "Safe Mode", so that you can log in normally.

After a win10 system shutdown,Turn it on again and find that it can't display its login interface,After running to this interface,No longer run,Click the mouse and there is no response:

If such a problem occurs, it is generally caused by the system not booting correctly, we only need to enter the safe mode and modify its boot mode.

Solution: 1. If you encounter this situation, you can directly force the shutdown three or four times, and then the boot settings page of the system will appear, select the "Enable Safe Mode" item, or press the 4 keys on the keyboard, as shown in the figure

win10 does not display the login interface after booting,There is no password login box,Follow the above methods to solve。

Win10 system can not enter the boot password, first check whether the keyboard is connected normally, or change a keyboard to try, if it can't be solved, just see if there are other login options below the password input box, choose other ways to log in.

How to set up automatic login without entering a password in the win10 system.

Summary. 1.At the same time, press and hold Ctrl+Shift+Esc to pop up the task manager, and click File - New Task.

2.Enter and click OK.

3.Complete the above steps to enter the desktop.

Further reading: In order to prevent this phenomenon from happening again, you can turn off the fast start of the win10 system after entering the system, and the specific operation steps are as follows:

1.Right-click on the power icon and select Power Options.

2.Click on the function of the Select Power button.

3.Click Change currently unavailable settings.

Win10 boot and enter the password can not enter the desktop.

1.At the same time, press and hold Ctrl+Shift+Esc to pop up the task manager, and click File - New Task. 2.

Enter and click OK. 3.Complete the above steps to enter the desktop.

Further reading: In order to prevent this phenomenon from happening again, you can turn off the win10 system after entering the system, the specific operation steps are as follows:1

Right-click on the power icon and select Power Options. 2.Click on the function of the Select Power button.

3.Click Change currently unavailable settings.

Can't get in. I've tried all of what you've said, and I can get it.

1. Press [Win] + [R] and enter []. 2. Then open [Management Template] - [System] - [Login] in turn. Then double-click Don't show welcome screen when logging in.

3. Then in the pop-up window, click [Enabled], and then confirm that it can be completed.

It's been on this interface all the time, and it doesn't work to press anything.