What should I do if I forget my password when the win10 system is offline

Since you have forgotten your password, you can use the mouse cursor to select the white bar first, and it will be displayed as the input status. In this state, press Ctrl+Alt+Delete on the keyboard at the same time, note that this set of key combinations should be pressed 3 times.

Attentive friends will find that this set of key combinations is actually the combination shortcut keys for opening the task manager in the Windows system. Press enter to enter the system. After entering the system, change the password.

In the control panel, select the user account - select the Fly account page - select Delete Password, and press the enter key to complete it.

Step 01 Insert the USB flash drive with PE function into the computer, and then enter the BOIS to set the USB flash drive to start. Save to exit.

A total of 2 figures》02

Enter the U disk boot interface,Like the PE boot disk on the Internet now, there is a Windows login password confirmation menu。 Select Re-enter, and then select 01 to clear the Windows login password.

If you know the drive letter installed in win10, select 1

If you don't know, choose 2

Then press Enter.

A total of 2 figures》04

Select the disk you want to install in win10, and then enter the serial number in front of it below. Enter again.

A total of 2 figures》05

Review the username for which you want to clear your password. Then enter the serial number in front of it into the selection entry number below. Enter again. After entering the next interface, press Y again

The user properties have been successfully modified, press any key to exit, and then restart the computer.

When you restart your computer and go to the login screen again, you can log in to your computer by clicking the arrow button without entering your password.

If you change the password through another device, but the computer is not connected to the Internet, it does not know the new password, and you can unlock it with the old password. If you forget your password, the lock screen can also be connected to the Internet, and you can unlock it with a new password after connecting to the Internet.

Offline state is that the computer is not connected to the network, usually after the browser is opened, the browser is not connected to the network, the browser will default to offline browsing (leaving the network browsing) because the web pages you usually browse will be stored on the local machine, so you can still browse the browsed information after disconnecting the network.

Offline work, as the name suggests, is the artifact of browsing the web in the state of being out of the network connection, and the network connection here refers to the specific ** server you log into. Every time you log in, Internet Explorer will save each web page you open in the form of a cache file in the Interne cache folder, so that you can speed up the login the next time you click on the web page.

At the same time, it also allows you to use the offline function when you are not connected to the Internet to browse the web pages you have logged on the Internet, and the benefits are self-evident.

Use web software:

The browser has a default web page software (usually FrontPage or Word), as long as you click the corresponding button in the shortcut toolbar, or select "File" and "Use Microsoft Frontpage (or Microsoft Word)" in turn, you can display the entire content of the web page in the window of the corresponding software, and you can copy or modify it at this time.

When the win10 icon appears, immediately press and hold the power button of the host to shut down and restart, and then after doing so three times, a recovery dialog box will appear. Click "View Advanced Repair Options" in the lower right corner of the mouse to enter the advanced menu mode of win10. Click on the "Troubleshoot" option, then click on "Advanced Options", click on "Startup Settings", click on "Restart", and select Safe Mode.

If you have forgotten your operating system password, it is generally recommended to reinstall your system.

Note: Back up important data from your hard drive before restoring your system.

When the computer restarts, when the boot logo appears, you can continuously click ESC to select the startup item (the product line is different, the entry shortcut key of the startup item is different, ASUS notebook is pressed ESC, desktop or motherboard is pressed F8).

Windows 10, like Windows 8, supports UEFI or non-UEFI boot (Windows 7 does not support UEFI boot).

For this installation of Windows 10, we recommend choosing UEFI mode boot, so that the subsequent partition format is a more advanced GPT format, if you choose non-UEFI mode boot (the fourth item in the figure below), the subsequent partition format is MBR, and up to 4 primary partitions will be created.

Install the system. After selecting Start USB flash drive in the startup item, the boot image begins.

Once you've selected settings such as language, keyboard, etc., select Next

Click "Install Now".

The installer is starting.

In the stage of verifying the key, you can enter the key directly, or you can choose to skip it temporarily.

Agree to the license terms.

Select Custom

Next, partition, [Windows 7 needs to click "Drive Options (Advanced)"].

Click New to allocate the size of the C disk, here 1GB=1024M, and allocate the size according to your needs.

If you need to allocate 100GB for the C drive, then it is 100 1024=102400, and in order to prevent it from becoming, you can add 5-10MB more

Here divide the 127GB hard drive into a partition, click New and click Apply.

Windows will automatically create a boot partition, select OK here.

After the C disk is created, the system reserved disk is automatically generated, so you don't have to worry about it. This partition will be automatically hidden after the system is done, then select the path of system C installation, and click Next.

If you have a lot of areas, don't choose the wrong installation path.

Files are being copied and prepared, and most of the next stages are automated.

The following diagram shows that all the steps are done automatically, and then they will be automatically restarted.

Windows will restart automatically, and the USB flash drive can be unplugged at this time.

Windows still loads the process automatically after restarting. During this period, it will be restarted several times, and the setup is being prepared.

When it is ready, it will restart, and it is time to verify the product key, and you can enter it directly if you have a key, or you can temporarily choose to talk about it later.

Quick to get started interface, choose to use Quick Settings.

Wait a moment. <>

At this point, the system is almost installed, create an account and password for this computer, and leave the password blank means that you have not set a password.

Next, the Windows settings are applied and wait for the final configuration to be prepared.

Windows is installed, so please enjoy it.