Home decoration, cement and white ash on the tiles on the ground are difficult to clean, who has a f

Try it with acetone, and if you are using a hard tile, you can use a cleaning ball to brush it directly, and then brush it when it is wet.

You can also use the following methods:

Usually the correct way to save effort is oxalic acid. Apply oxalic acid to the cement tile, wait another 10 minutes, rinse with water and brush to get rid of it.

Repeatedly sticking and tearing with transparent adhesive with good viscosity can remove some of the surface;

Soap with a little ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article applies to tiles, ceramics, glass, etc.);

Wipe with a special cleaner or sneaker stain remover.

Cement and putty powder lime powder remains on the tile after decoration can not be cleaned with clean water, the ground will dry and will appear again, you can use the descaling king of the shield king to clean, it is specially for cleaning this kind of stains. Descaling King online Shield King Home Furnishing franchise store is sold.

It is recommended that when the ground is dry, use a small shovel to shovel it first, it should be able to shovel off the large dirt on it, and you can put a basin of water in it to wash the conditioner, and then scrub it vigorously with a cleaning ball, and wipe it clean with a wet towel after repeating it several times.

Sprinkle a small amount of water on the surface of the floor tiles, wait for about 10 minutes, and then gently shovel it off with a spatula!

It's as simple as mopping wet with a mop and then shoveling with a spatula.

If there is cement ash on the tile, you can try the following methods to remove it:

Water and soap: Wash the tile surface with warm water and soap, then rinse off the ash and soap with clean water.

Brine: Mix salt and warm water, apply a rag to the cement ash, wait about 10 minutes, then rinse off with clean water.

Vinegar: Pour the vinegar into a small container, soak it in the vinegar with a rag, and wipe off the cement ash.

Soapy water and white vinegar: Mix the soapy water and white vinegar together, apply a rag to the cement ash, wait about 10 minutes, then rinse off with clean water.

These methods can all help you remove the cement ash, but if the cement ash penetrates deep into the surface of the tile, you may need to ask a professional to help you remove it. Please note that before removing the cement ash, test it in an inconspicuous place to ensure that it does not damage the tile surface.

Choose water sandpaper and gently erase.

1. If the cement dirt on the tile has dried and solidified, do not hit it with a hard object to avoid scratching the surface of the tile, it is recommended to choose water sandpaper, gently wipe it until it is wiped off, and then wipe it clean with a wet towel. Of course, if the dirt of Shui Xun Qingchun mud is relatively large, you can shovel off some with a putty knife first, pay attention to the strength, and then polish it with sandpaper to wipe it clean. 2. Of course, if there is a small amount of cement stains in the tiles and crevices, it is recommended to use toothpaste to clean up, which has a strong cleaning effect.

First squeeze an appropriate amount of toothpaste on the brush, determine the amount of toothpaste to use according to the size of the stain at the joint, and then directly brush the joints of the tiles. 3. The cement imprint on the tile can also be used to contact us with a variety of membership cards, don't underestimate this card, it plays a wonderful role in dealing with the cement imprint on the tile, the card is scraped against the place where there is a cement imprint, not only can be scraped very clean and fast, but also can rotate 360 degrees, and will not produce any sharp marks on the surface of the tile, and finally wipe it with a rag. 4. The cement dirt on the tile is relatively stubborn, and the area is relatively large, you can choose no oxalic acid to clean the tile, but pay attention to spray the diluted oxalic acid on the tile for a few minutes and then scrub, wipe it with a dry cloth and dry it, if the quality of the tile is poor, it is best not to use oxalic acid, so as not to damage the tile, and be sure to rinse it with water after wiping.

Pay attention to when washing, both hands must wear rubber hand inspection sleeves to avoid injury.

During the decoration process, many decoration materials will be used, such as cement white ash, which will be left on the floor or tile. So how to clean up the cement ash on the floor after decoration? Let me explain it to you.

1. If the manuscript is made of wooden floors, then the cement white ash generated on the ground can be wiped clean with a damp cloth, and after the white ash on the surface is wiped clean, then use a clean tow to dry the ground. Which round.

2. If it is not easy to wipe clean, you can also use soapy water or professional detergent to scrub, and after the surface is scrubbed, you can use water to clean the surface.

When decorating the floor, there will be cement white ash left on the ground, how to clean the cement white ash on the floor after decoration? Today, I will answer you one by one for the scum core.

1. Ceramic tile or cement floor.

The tile floor can be mopped with a wet mop, and then the brick surface is gently scraped with a shovel, and after cleaning off the white ash, it can be mopped with a clean mop, and finally wiped dry with a dry cloth. If you find that there is white ash left after the shovel is scraped, you can use 84 disinfectant or toilet cleaner to scrub the dry fiber, the scrubbing time should not be too long, and it should be cleaned with water in time after scrubbing, so as to avoid the brick surface being corroded. It can also be cleaned with sandpaper, steel wool balls, vinegar, etc.

2. Wooden floor.

The white ash on the wooden floor can be wiped with a damp cotton cloth, or wiped with a wet sawn wood, first wipe off the white ash, and then scrub, and then use a clean mop to dry the ground after scrubbing. You can also use soap, ammonia or turpentine mixture, shoe stain remover, professional beamless imitation cleaner, dilute sodium water, nail polish remover, wind oil essence, etc.

It is difficult to remove white cement on imitation floor tiles, and the longer the time, the greater the humidity, the more difficult it will be. You can try the following methods to clean up:

Hydrochloric acid or phosphoric acid solution and water are mixed in a ratio of 1:5 (if the cement is thicker, you can drop some hydrochloric acid or phosphoric acid solution directly on it first). Pour the prepared solution on top, sprinkle with saw foam, and use a wooden spatula (don't use metal to leave marks, and don't use steel wool balls to brush the pot) to clean up.

When shoveling, you can also wet the cement slurry with a rag dipped in water. Pay attention to cleaning with the shovel. Generally, it can be removed by wiping it several times.

The correct way is to protect the entire front of the tile with paper stickers when building floor tiles, and wipe the floor tiles clean immediately after they are laid.

It is difficult to remove the imitation floor tiles with cement stuck to the tiles, and the longer the time, the greater the humidity, the more difficult it will be. The really good experience is that when putting together tiles, either protect the entire front of the tile with paper stickers, or wipe it clean immediately after it is put together and fixed with an air hammer. Cement residue on the surface of the tile is equivalent to waste, and forcibly removing it with a sharp tool will scratch the surface.

If the ash is dusty, you can wipe it off with a cloth.

Use a shovel blade to remove the thicker one first, and then use a steel wool ball with clean water to brush it.

I rubbed it little by little with a steel wool ball.