May I ask how to make the height and width of the cement staircase with a large core board as a base

The stair tread should be 150 high; Width 280 300, the thickness of the large core board is 13 19, so try to choose the practice of the ground, is also 13 19 thick, can not meet the requirements, but can only pad the step, for example: a layer of ground thickness 30, first do the ground, and then package the stair tread height 150 large core board, you will find that the face of the tread is 30 different from the top of the big core board of 150, can only be cushioned flat, and then wrap the width (280 300 + 13 19) of the tread surface, so that although it is more troublesome, but the living rules made, there is no half a step.

My previous one should have been helpful to you.

1.Isn't the staircase slab oblique, and when the whole is poured, won't the concrete sink and accumulate?

2.Are the steps of the staircase poured one by one?

The bottom is an inclined plane, no problem, the door is set up on the façade of the tread, and then the concrete is poured.

Similar to the effect of the terraces, look at the references, it is very professional, and you can understand it by looking at it patiently.

This one is the best, look at this.

The stair tread should be 150 meters high; The width is 280 300, the thickness of the large core board is 13 19, so try to choose the practice of the ground, it is also 13 19 thick, and it can not meet the requirements of the Qingzhi Knowledge, and can only step on the mat, for example: a layer of ground thickness 30, first do the ground, and then pick up the staircase tread height 150 large core board,

The first step in the construction of cement stair tread board, foundation treatment.

Newly bought duplex or duplex house, the living room should have been made of cement concrete stairs, solidity is no problem at all, it can even be said to be the strongest part of a building, of course, it can not be removed when decorating, but it can be further improved by installing steps to further improve its decoration and comfort. As with any renovation process, the first step is to work on the foundation. Level the surface with cement mortar, of course, leaving enough space for the installation of the treads.

The second step of cement stair tread board construction, woodworking board priming.

According to the usual practice, the finished product tread can not be directly installed on the surface of the cement layer, but needs to be taken care of with woodworking boards first, which is also a carpentry work. The site generally uses a large core board as the main material, which is convenient for cutting, and it is also convenient to fix it directly with a nail gun. It can play a further leveling role, and also play a role in articulation, and the tread can be directly mounted on the woodworking board.

The third step of cement stair tread board construction, installation of treads.

As long as the basic work is done, the final installation of the tread plate is very simple, as long as the position is found, it can be directly fixed with self-tapping nails or nails. Of course, the fixed position should also be clever, not too conspicuous and affect the overall appearance. After installation, you can test the firmness by hand, carefully check the edges for burrs, and if necessary, use sandpaper to sand a little.

In addition, if you feel that the anti-slip performance of the installed tread is not very good, you can also install an anti-slip strip.

The general steps are:

The first step is to change the water, electricity, and heating! If you are satisfied with the original water, electricity and heating location of the house, the first step is saved!

The second step is to paste floor tiles, wall tiles, and window sills! If you're going to make a wooden floor, don't move the floor!

The third step is to make appliances for furniture, ceilings, security doors, and kitchens. Mainly do all the carpentry work, this step is done!

The fourth step is to corner the line, scrape the wall, paint, and install the socket switch. When the wooden floor is a wooden floor, the baseboard does not move! Install the switch socket before the last process on the wall! When there is the wooden floor, I do it now.

The fifth step is to install all sanitary ware, lights, glass, and curtains in the bathroom.

Step 6: Clean up and remove air odors.

Step 7: Move furniture, buy electrical appliances, and get ready to move in!

Enter the renovation.

The first step in the substantive BAI phase is hydropower retrofitting. zhi

The process of decorating the house is as follows: back.

1. Preliminary measurement and design of answers.

1.Clarify the area involved in the renovation process. In particular, the area of tiling, wall paint, wallpaper, and flooring.

2.Define the main wall dimensions. In particular, it is necessary to design the wall size for the furniture in the future.

Second, the main body disassembly.

Entering the construction stage, the main demolition and renovation is the first project, mainly including wall demolition, shoveling wall skin, dismantling heating equipment, replacing plastic steel windows and so on. To put it bluntly, it is to build the framework of the construction site first.

3. Hydropower transformation.

Fourth, carpentry. The basic order of appearance is: carpenter, mason (bricklayer), painter.

Fifth, tiling. In the process, the installation of the following three links is also involved:

1.Installation of doorway stones and marble window sills. The installation of the door stone can be completed together with the floor tiles, or after the floor tiles, the installation of the marble window sill is generally done after the window cover, and the workers who install the marble will prepare glass glue, and the marble and the window cover will be sealed with glass glue.

2.Installation of floor drains.

3.Installation of range hoods. The range hood is the first home appliance to appear, and after the kitchen wall and floor tiles are paved, you can consider installing the range hood.

6. Paint the wall.

7. Kitchen and bathroom ceilings.

8. Install cabinets.

At the same time, there is also a sink (which can not include water and water parts) and a gas stove, and it is best to coordinate with the property to turn on the gas before the cabinet is installed, because the gas stove needs to be tested after it is installed.

9. Wooden door installation.

10. Floor installation.

Ten. 1. Pave the wallpaper.

It can be improved, but it is difficult to eradicate. I guess your floor slab is a cast-in-place solid reinforced concrete slab in order to resist earthquakes. This kind of board has a good performance of blocking sound transmission in the air, but the performance of solid water transmission is not good for you.

Ways to prevent solid sound transmission: 1. Hollow floor slab. You can't.

2. The upstairs floor is made of wooden floors with keels, which hinders solid sound transmission. Where the initiative lies with the neighbors, you can't do it. 3. Make a layer of sound-absorbing fiberglass wool ceiling under your ceiling.

You can do it, you can improve it. Stomping is a solid direct sound, and speaking is through the air, which is a gas sound, and there are some differences. The speech is so loud that it can be heard upstairs and downstairs.

If you have insulating glass and close the window, you won't be able to hear. Your neighbor is not very civilized, and you are a little allergic because you are annoyed with him.

There's no way to see the people downstairs through the slabs, so you don't have to suspect that the people upstairs are against you.

Solid sound transmission is very strong, and the only way to insulate it is to do so.

There are many ways to insulate the room:

1. Seal the gaps and pores that may transmit sound;

2. Double-glazed windows;

3. Add mineral wool to the wall, ceiling and ground;

4. Add sound-absorbing felts and blankets on the top and walls;

5. Carpet on the ground;

Depending on how much you want to achieve sound insulation, there are always more ways than problems.

Go upstairs and talk about it, don't just say it, you have to be as kind as possible, and you have to pretend to be the most sincere [no way, hehe, only in this way, people are on our heads], remember to buy some gifts for his children, this trick is very smart, you try, people are afraid of respect, I haven't failed in this regard, but if you have a conflict in the early stage, I can't say,

You can make your ceiling a suspended ceiling, and when making a suspended ceiling, it is completely possible to avoid the situation you mentioned above from the perspective of craftsmanship and sound insulation.

If you have the financial means, you can install a soundproof panel, if it doesn't work or let them not bother, you can also install a light-off panel.

It is advisable to communicate well with the upstairs. Ask them to tap when they are moving. Neighbors should be harmonious, and if you change the house renovation project, you can add flexible packaging or plants at home to be silent and soundproof.

China Flooring Network

I don't think it's intentional upstairs, you don't have any hatred, it's probably upstairs that destroys the soundproofing, and if you want to change that, it's a little hard, because the soundproofing is laid on the ground, unless you put soundproofing on your roof, it's expensive, and it's a big project.

Put a good mindset, don't think too much, and you will feel better.

I feel the same way!! I imagined rushing up and killing his whole family all day long!

It is necessary to use a large core board as a base before laying laminate flooring on it.

It's just that it feels weird when you walk.

Cement stairs can not be done step height and step width exactly the same, also need what you call the bottom, take 18 thick joinery as the bottom, be sure to buy a good joinery, when laying blockery, you must adjust the step height is not wide, the step height is high with styrofoam, after the completion of the solid plank, I hope it can help you!!

Beat the cement first, then do the woodwork!

You can install a marble tread, the middle of the staircase with a color plate, both ends with a black board to walk the side, very beautiful!

Are you going to pedal wood or marble? Wrap it with a large core board first, which can play the role of leveling and cushioning, and then install wooden pedals and handrails.

If you use marble, just lay it and install the handrails you want.

The edge of the cement stair pedal can be added with angle iron, which is durable.

Cement staircase paint, wooden or stainless steel handrails are OK.

The edges of marble or tiles are rounded.

You can also lay carpets or tiles, and the floor can be equipped with handrails.