It is better to choose tile adhesive or cement brick for new house decoration

1.First of all, let's talk about the pros and cons of cement and tile adhesive. If you use cement to paste tiles, it is particularly easy to fall off the hollow drum, but you can completely avoid this phenomenon by using tile adhesive paste.

If you look at it from the top, the price of cement will be slightly cheaper, and the ** of tile adhesive is generally more expensive. Another point is that tile adhesive contains formaldehyde, which is harmful to people's health. Although the amount of tiles is relatively small, it will also be harmful to the human body.

2.Tile glue wall tiles.

Cement mortar: It is a mixed substance formed by the combination of cement and water and other additives. This substance can be used to paste tiles. Some additives added in the production of cement mortar can form a thin film that blocks the entry of water molecules.

Disadvantages: The firmness of the paste is poor, the thickness is large, and it is easy to form a hollow drum.

Tile adhesive: Tile adhesive has high bonding strength, water resistance, aging resistance, and is widely used.

Disadvantages: The cost is much higher than that of cement mortar.

3.Advantages and disadvantages of cement:

Cement is the most basic building material common in our lives, easy to use, cheap, but the shortcomings of cement are also many, the thickness of the paving is large, the paste is not firm, and it is easy to hollow. It is precisely because of these that the basic position of cement in the field of building materials has been slowly shaken.

4.But some people may say that the cement effect will be worse than the tile adhesive, but in the eyes of some people, it may not be, because most of the reasons for the hollowing of the tile are not cement but the construction is not standardized, there is no standardization, which does not matter what the cement is, but this is just a point of view. In any case, there are indeed some problems with cement tiles, which is undeniable.

How to use the adhesive for the floor solid tile:

The adhesive of the building solid tile reduces the dependence of the traditional construction technology on the process of sprinkling water and soaking bricks on the base, and better avoids the problem of insufficient sprinkling caused by soaking bricks.

1. Mix and stir a package of materials according to the specified water distribution ratio, stir until it is uniform and free of agglomeration, let the slurry stand for 3 to 5 minutes, stir again, and then use.

2. Choose the appropriate toothed scraper to ensure that the effective pasting area is at least 65% of the area of the tile.

3. Use a special toothed scraper to fill the mortar with a thickness of 3 to 5 mm (that is, the thickness of the slurry on the tile), and then use the toothed side of the scraper to pull out the stripes in a straight line or S shape, and the scraper plane and the base plane intersect at 45 degrees to 60 degrees. Tiles do not have to be soaked in water, 4, just paste on the wall and ground in order of arrangement and compact. And adjust the position of the tiles within the stipulated time.

Undried adhesive can be removed with water, but can only be removed mechanically after curing. "

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, good things are generally expensive, so there is no need to use tile adhesive in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with general cement.

If you paste tiles, it is better to use cement, and then use cement to paste, you can first play self-esteem glue on the back of the tile. After pasting it in this way, the effect is better and not easy to fall off.

Tile adhesive: the tile does not need to be soaked in water, the wall does not need to be wet, and the tile and the wall can be firmly pasted together; The thin paste method is adopted, the thickness only needs 3-5mm, and in the case of the base leveling, it can usually be paved 20 square meters a day.

Tile adhesive: Tile adhesive is relatively simple, as long as you add water and stir, you can use it, saving a lot of processes.

Our likes are clicked on the top right corner.

At the end of the service, five stars will appear.

Then light them up.

Paste the wall tiles with tile glue well. If it is a floor tile, you can use cement mortar. The wall tiles must be better with tile glue, and the tile glue is more firm.

Tile adhesive should be stronger, more solid than cement, you can see the use of tile adhesive.

It is relatively better to use tile adhesive to pave it.

1. What is cement mortar? What is Tile Adhesive?

1. Cement mortar.

Cement mortar is a traditional construction scheme, but cement mortar construction, it is difficult to ensure that the cement mortar can be evenly covered, in addition to pay attention to the selection of cement number, cement mortar ratio and other precautions, there may be hollowing, falling off in the later stage; In addition, cement mortar construction is longer than the use of tile adhesive, and there are strict requirements for the level of construction workers.

2. Tile adhesive.

The new type of tile paste material has the advantages of simple construction and firmer paste, however, tile adhesive also has certain disadvantages, compared with cement mortar, the construction needs to ensure the flatness of the wall, and the base layer should also be cleaned, otherwise it will affect the bonding effect of tile adhesive.

Second, is it better to use cement or tile glue for tiles?

1. Comparison from the construction aspect.

If the cement mortar is used to paste the bricks, the construction steps have wet walls, brick throwing, support, etc., the effect is low, and the effect will not be too good, and it is easy to produce the situation of tile hollowing and falling off; If you use tile glue to paste tiles, tiles do not need to be soaked in water in advance, nor do you need to wet the wall, the technical requirements of decoration workers are not high, the paste speed is 4-6 times that of cement, the brick joints will not have excess slurry, the brick surface is not dirty, and you can also pave multiple tiles at the same time, which is much better than the paving method of cement mortar to be single-piece sizing.

2. Comparison in terms of aesthetics.

When using tile glue to paste tiles, the glue ratio of the wall is uniform, and the shrinkage during the bonding process is also consistent, so the flatness of the tile surface is high.

3. Start from the decoration materials.

At present, the quality of the ceramic tiles used in tiling is high, and the water absorption rate of ceramic tiles is also decreasing, so that if the traditional cement mortar is not improved in quality, the demand for tile adhesive will be higher, of course, the decoration market is also full of cement and tile adhesive of different quality, and the owners should pay attention to the method when they go to buy.

Answer: Tile is good with tile glue. The cement needs to be blended, and the walls need to be wet and supported, which will be more complicated. The tile adhesive only needs to be stirred with water, and the adsorption is good and the paving is fast.

And the water absorption of cement mortar can not meet the current paving, which is likely to cause the tile to fall off due to thermal expansion and cold contraction.

Compare the heart] [compare the heart] [compare the heart].

Which is better, tile adhesive or cement? In fact, tile adhesive can be said to be an upgraded version of cement, such as Gulai tile adhesive is a high-quality environmentally friendly polymer modified cement-based composite adhesive material, which is made of high-standard cement, graded sand, redispersible latex powder and other additives. So if you want to say that it is good, the effect of tile adhesive must be better than cement!

1. Gulai tile adhesive (Gulai tile adhesive is a well-known large-scale enterprise of new environmental protection decoration materials in China) 2. Yuegang tile adhesive (a well-known waterproof building materials emerging enterprise in Shanghai) 3. Tibeibel tile adhesive (a professional new environmental protection waterproof manufacturer in Guangzhou) 4. Jiacai tile adhesive (a well-known building materials manufacturer in Hunan).

5. JCDecaux (a wholly-owned enterprise designed by the French PAREX Group in China) 6. Xiluoka tile adhesive (Hunan emerging waterproof building materials manufacturer).

7. Yuhong (Beijing Yuhong Waterproof mainly promotes waterproof coating products) 8. Gushuibao tile adhesive (Hunan new building materials manufacturer).

9. Sika (Sika (China) **** entered the Chinese mainland market in 1993) 10. Mapei (Mapei Group was founded in Milan in 1937).

Cement is good because it is not only strong but also cheap in the market