How to design the switch socket in the bathroom to be more reasonable and safe?

Be sure to install a switch that can be waterproof. Bathrooms are humid, and water from the shower can also accidentally splash on them.

The switch socket should be designed on the outer wall of the bathroom, which is not only convenient to use, but also safer.

In fact, the switch and socket of the bathroom should be designed relatively high, and there should be a corresponding protective cover, so that there will be no water vapor ingress.

Introduction: The bathroom is a place where people often wash, which will inevitably lead to some water in various places. Therefore, when using electronic products in the bathroom, it is necessary to arrange the socket reasonably, so as to ensure safety.

After all, the water and electricity environment of the bathroom is very complex, so it is necessary to pay special attention to the installation of the bathroom socket. For example, some sockets with switches can be installed, or sockets with splash boxes. The topic I want to share today is, how should the toilet socket be arranged?

Because the bathroom is damp all year round, but if you want to use the bathroom comfortably, you must deal with water and electricity. If you use wet fingers to pull out the socket or plug after washing your hands or face, it is very likely to cause accidents. So when choosing a socket, try to choose a socket with a switch.

When in use, press the switch of the socket, then in terms of electricity, it is relatively safe. You can choose an outlet with a splash box, because the water cannot touch the electricity, and the electricity cannot touch the water, but the bathroom must be cleaned with water. Therefore, installing some sockets with splash proof can avoid water droplets splashing into the socket and can effectively avoid accidents.

2. Conclusion. In the process of installing the socket in the bathroom, we must pay attention to the socket grounding wire, because the socket grounding wire can ensure safety to a great extent. Don't be afraid of trouble and skip this step.

And under normal circumstances, the bathroom needs to be installed and arranged 4 sets of sockets, which are the 5-hole sockets on the side of the window, the water heater and the exhaust fan, the second group is the three-hole socket with the house built, respectively, for the washing machine bath bomb dryer to use, and the third group is installed in front of the vanity mirror to set up a two-hole or 5-hole socket with a room and, which can be used for lighting and plugging in the hair dryer. Also set up a switch with a 5-pin socket, so that it can be temporarily powered up to use, depending on the situation, and also used as a rainy day. <>

The arrangement of the toilet socket, pay attention to these points:

1.A socket must be reserved 1 meter below the roof for water heater use.

2.If the washing machine needs to be placed in the bathroom, it is best to reserve an outlet nearby.

3.Sockets should be placed around the mirror cabinet, so that small household appliances such as hair dryers do not need to be in the plug bar.

Note: The socket in the bathroom must be covered with a waterproof cover, to connect the ground wire, if there is a condition, it is best to buy a 5-hole socket with a switch.

Regarding the arrangement of toilet sockets, it should be placed outside the bathroom according to its own needs, so as to control the toilet and exhaust fan, or it can be placed next to the mirror to control the pre-season lights, bath bombs and water heaters. The switch can also be placed in front of the vanity mirror, so that it can meet the needs of hair dryers and permanent lights.

Toilet sockets should be placed at some distance from the water source, and it is best to choose waterproof and splash-proof sockets. Because the bathroom is damp.

There should be 1 single-link multi-switch and place it outside the bathroom to control the toilet and exhaust fan;

1 multi-switch, placed next to the mirror, to control the mirror lamp, bath bomb, electric water heater;

Single-link multi-switch 1 dual-control design as needed to control the lighting of the living room, aisle or bedroom;

1 toilet socket with switch socket (5 holes), placed next to the window for water heater and exhaust fan;

1 socket with splash proof box (2 holes and 5 holes), placed in front of the vanity mirror, used for hair dryer and permanent lamp needs;

3 sockets with splash proof box (three holes), according to the specific situation, find the right place for washing machine, bath bomb and dryer;

1 socket with switch (5 holes), reserved for temporary home appliances according to the specific situation.

The light switch is next to the door, and the socket is in a place where the electrical appliance is used, such as a hair dryer next to the vanity, and the water heater next to it where the water does not splash.

Is there anything I should pay attention to when installing sockets in the bathroom? The installation of the switch socket is directly related to whether the household appliances can be convenient, especially the installation position of the bathroom socket, pay attention to the waterproof touch, and also pay attention to when the equipment is not in use, you can cut off the power supply, or you can let the wires be unplugged, which will affect the magic process such as the washing machine socket, and the air conditioning socket is turned off without unplugging. The following ** to the small series to introduce the outlet of the electrical socket in the bathroom arrangement.

How to install bathroom décor in a bathroom switch socket.

In the bathroom, there are more household appliances, with bathtubs, washing machines, lighting, hair dryers, etc., this is not a lack of some high-power household appliances, so the bathroom must pay attention to the ventilation sleeve manufacturer, in order to prevent the switch from causing the switch to lead to the switch when bathing in the danger of electric shock, you need to choose a switch socket with a waterproof cover, which is relatively safe.

In fact, the quality of the switch is also very important, and the key to choosing the quality is to be stronger, the stronger the switch, the better. From the shell, the smooth switch of the sliding slide plate is better insulation, or you can choose some brands to loud socket switches, buy one with peace of mind.

The installation of switch sockets must be kept at a certain distance from the wall, the distance between the switch and the ground is between meters to meters, and the horizontal distance between the door frame is between 15 cm and 20 cm. Two to three switches should be installed in a bathroom, taking care to keep the height consistent. When the holes are arranged, the wiring requirements for the single-phase binocular socket are:

For example, "left zero right fire" is "left zero right fire", and vertical arrangement is "until zero". The wiring requirements for the single-phase three-prong socket are: the topmost ground hole must be connected to the ground wire, true, correct, it is worth noting that the neutral wire and the PGD wire cannot be misused or attached.

In addition, it is important to note that the switch socket is installed in the bathroom, and having good waterproof properties is the most important. Decoration is not only a beautiful and comfortable environment, the quality and safety of the products are the first priority.

First of all, when installing the socket, it is necessary to install a splash-proof box, so that the waterproof socket will be safe; In addition, it is necessary to pay attention to the height from the ground, which is to prevent children from being electrocuted, and the safety of installing sockets is the first priority.

When the socket is installed, the surface-mounted socket should not be less than one meter from the ground; The concealed socket is not less than one meter from the ground, and it is strictly forbidden to connect the grounding wire to the gas pipeline to avoid serious fire accidents.

Of course, pay attention to waterproofness, and put a plastic cover on the outside, so that it has a waterproof effect, otherwise you will be electrocuted.

The height from the ground should not be less than a meter at the time of installation to prevent children from being electrocuted or splashed with water on the socket. And the socket should be installed with a waterproof splash box.

The socket should be splash-proof.

There are 3 sets of sockets in the general bathroom.

Two sockets with switches.

For water heaters and washing machines.

The use of switches to control the breaking can prevent arcing from plugging plugs, dampness in the bathroom, and prevent short circuits and greater dangers.

There is also one for use on the washbasin.

Generally, the height of the installation is about 2 meters.

It is used for grooming.

Such as a hair dryer or an electric beard.

Toilet sockets should be installed outside the bathroom area 2 (60cm from the horizontal distance of the sprinkler head or bath).

If you can't be satisfied.

The installation height of the socket should be higher.

It is usually installed outside Zone 2.