How to design the dry and wet separation to make the bathroom not crowded? What to do?

1.For those simple toilets, it becomes a very important thing to do dry and wet separation. The separation of dry and wet in the bathroom is not done well, and it will be more troublesome when we usually use it.

If you feel that the bathroom at home is not practical enough, you have to queue up every day to use it, or the water vapor in the bathroom is too high, it means that you need to give the bathroom a makeover.

2.This transformation is also very simple, that is, to do a good job in the design of dry and wet separation in the bathroom, as long as the dry and wet separation is done well, the problems we encounter can be solved. Placing the dry area of the bathroom outside can perfectly separate the dry area from the wet area, and we will not affect the outside washing area when we use the shower area and the toilet area.

In the morning, when everyone is in a hurry to go out, even if there are family members in the bathroom to go to the toilet or take a shower in the shower area, we can also use the outside washing station to wash our face and brush our teeth, which will be very convenient.

3.For friends who only have one bathroom at home, this design is the most practical method. Using walls to separate the dry and wet areas of the bathroom is the most practical and traditional method.

This method is also very simple to build, as long as you design a wall between the dry and wet areas of the bathroom when you are decorating. Placing the dry area of the bathroom outside can perfectly separate the dry area from the wet area, and we will not affect the outside washing area when we use the shower area and the toilet area. In addition, the exterior design of the bathroom can alleviate the odor problem to a certain extent, even if the odor in the bathroom occurs, it will not affect the bathroom and other rooms outside.

4.Using walls to separate the dry and wet areas of the bathroom is the most practical and traditional method. This method is also very simple to build, as long as you design a wall between the dry and wet areas of the bathroom when you are decorating.

If you are worried that the partition wall will affect the lighting and ventilation of the bathroom, you can also choose a semi-partition design. Semi-partition walls can only be designed directly in wet and dry areas. You can choose an open design above the wall or you can install glass as a partition.

We must pay attention to the reasonable layout when designing, try to make the sink a little smaller, if the conditions allow, you can put the washing machine on the balcony, so that it will be better to do dry and wet separation, the space will not be too small, the shower room is best to be rectangular, and it will be convenient to use in the later stage.

The design should be based on the overall sense of space, there should be design drawings, pay attention to the design situation, so that the designed bathroom will not look crowded. The design should be carried out by an experienced person, and attention should be paid to the design of the wet and dry separation.

You can separate the bathing area with a glass door, or a curtain if the space is not enough, you can also set the toilet in a wet area, and try to set the shower or bath in the corner, and you can also find a professional designer to design.

I think that the dry and wet separation should be properly designed, and the overall coordination should also be emphasized, and the functionality should also be emphasized. It is also necessary to place the furniture correctly according to the proportions. You have to pay attention to the overall waterproofing and moisture-proofing, so that it will not appear crowded.

The design of the system should be carried out, but also attention should be paid to some isolation, and some waterproof and moisture-proof furniture should also be selected. This design and typography will not be very crowded.

You can use U-shaped glass, which will not make the bathroom look crowded.

How to separate dry and wet in the decoration of a small bathroom so that it can be reasonable and not crowded? Go to understand that the bathroom is too small, how to achieve dry and wet separation? Here's a brief description.

1. Make a partition in the bathroom.

It is convenient and effective by dividing the dry and wet partitions in the bathroom.

How to build: You can use the half-section wall to separate the bathroom into a dry area, and place small bathroom furniture such as washbasins or some wooden shelves; The wet area section includes a toilet and a bathtub. The floor in front of the washstand should also be kept clean and an absorbent carpet can be laid.

In ground treatment, the dry zone tends to be higher than the wet zone, making the zoning of the dry and wet zone more obvious.

When it comes to partitioning in the bathroom, there are a variety of partition materials to choose from: glass, glass bricks, plasterboard, screens, shower curtains, and more. When choosing, consumers should pay attention to the moisture-proof performance of the partition material.

For example, the door on the alloy partition or light wall should be made of anti-rust and anti-corrosion materials such as glass doors, and the reconstructed light wall in the bathroom should be moisture-proof.

Reminder: In addition to using partition materials, dry and wet partitions can also be distinguished by decorative styles. For example, the perimeter of a bathtub in the wet area is often tiled, while the dry area can be painted with a wall paint that is consistent in color but visually separate, reminding the user to distinguish between the two.

2. Independent toilet space.

In general, the bathroom area is placed in the bathroom. The washroom does not need to be too private, and the washroom can be made independent by transforming the space. This is more practical and functional, suitable for small rooms with only one bathroom, to avoid family members "grabbing the toilet" in the morning; At the same time, the function of the toilet is reduced, which is easy to clean and maintain.

Open washroom areas are often the highlight of the interior with furniture and decorations such as washbasins, mirrors, shelves, and greenery.

Method: Separate the toilet space, usually using the partition method. The partition is to separate the wash basin placed in the bathroom while maintaining the original design of the waterway.

In order to unify with the interior style, it is often used to use a lack of wood texture or white partitions, and the materials can be gypsum board, antique bricks, large core boards, etc. There is often a certain amount of space on both sides of the separated washroom, and a set of base cabinets and wall cabinets can be designed to transform into storage space.

Pay attention to cleaning in the open toilet space, as stains on mirrors, countertops and other positions can easily affect the overall decorative effect; It is best to use waterproof materials on the floor under the washbasin, or lay a small carpet to prevent water stains from accumulating. Finally, it is worth mentioning that no matter how the bathroom decoration is, it is necessary for us to understand the common sense of bathroom decoration. I think that in order to effectively implement the precautions for bathroom decoration, we must have some toilet safety knowledge, so as to avoid accidents that should not occur.

Be sure to do a good job in the bathroom shower area, toilet, washbasin between the separation, the bathroom dry area can use log countertops and personality small basins, the cabinet of the sink can be properly covered when not in use, and the wet area can use a corner shower room to save space.

For small bathrooms, glass partitions can not be used to separate dry and wet, but to use shower curtains for dry and wet separation, and put away the shower curtain after each bath, which can not only have the effect of dry and wet separation, but also will not make the space narrow.

Introduce 4 kinds of dry and wet separation methods in toilets: primary: shower curtain + water retaining strip, advanced: glass grid + top spray. Intermediate: Integral shower room, Advanced: Wash basin moved outward.

It is best not to use squatting in the dry and wet separation bathroom, but to use the toilet, so that the odor is much smaller. It is also possible to separate the sink from the toilet shower with a frosted glass door, which is both aesthetically pleasing and functional.

Sliding doors can be used. The innermost setting is wet, and the outermost setting is dry. The middle is blocked by a sliding door. That's great.

Glass isolation should be used, as such a design is stylish and very practical.

If the bathroom area is relatively small, at this time it is not very suitable to choose the shower room, you can choose to use glass for dry and wet separation, you can also choose to use a cabinet, and then you can use dry and wet separation, of course, you can also choose to use a shower curtain, I think these are good choices, and it is also more space-saving.

You can go to a shower room to separate dry and wet, and if the bathroom space is particularly small, you can move the washbasin to the outside of the bathroom.

The sink can be placed outside, and then a glass shower room can be installed, so that dry and wet can be separated.

If you need to carry out dry separation, you can move the handwashing station outward, and try to choose simple decoration to better achieve dry and wet separation.

Don't install too many sundries in the bathroom, you can install a wall cabinet in the corner shirt, put some less commonly used items into it, and install a partition cabinet at the back when installing the mirror; You can install an exhaust fan inside, a shower curtain or a frosted glass door collapse.

Dry and wet separation bathroom decoration precautions 1: the bathroom cabinet and the ground are separated, and the lower edge of the bathroom cabinet should be off the ground, which will cause certain difficulties to the installation, but it is best to do so. Because in the bathroom, there will inevitably be water on the floor, which may be formed by you washing the floor, and accidental leakage cannot be ruled out.

If you separate the bath cabinet from the ground, you can make the floor clean and have no dead ends, and you don't have to worry that the bath cabinet will be stained by water, killing two birds with one stone. Precautions for dry and wet separation bathroom decoration: the cabinet should be separated from the outside of the cabinet, the waterproof outside the cabinet should be done, and the moisture-proof inside the cabinet should not be ignored.

The workmanship of the bath cabinet must be fine, and the stitching must be tight. There are many ways to design doors and drawers: for example, installing magnets and adsorption switches on the doors, and using drawer springs to automatically rebound to ensure that moisture enters without holes.

<> Dry and wet separation bathroom decoration precautions three: set up "steam insulation layer", before the installation of the shower screen, waterproof and moisture-proof treatment is the focus of bathroom construction, the condensation on the top of the bathroom often corrodes the ceiling, so that the ceiling and walls are prematurely aged. Before installing the ceiling, a "vapor insulation" should be laid to ensure that the rising water does not condense on the icy floor, causing corrosion on the top.

The waterproofing effect of the bathroom is related to the waterproofing material. Environmentally friendly waterproof materials are used to prevent water seepage and create a damp and odorless bathing environment.

Separate the bathroom cabinet from the floor. The bottom edge of the bathroom cabinet should be off the ground. Because in the bathroom, there will inevitably be water, water may be formed by you washing the ground, and accidental leakage is not excluded, if the bath cabinet is separated from the ground, not only can the ground be clean without dead ends, but also do not have to worry about the bath cabinet will be stained with water, which can be described as killing two birds with one stone.

The inside of the cabinet should be isolated from the outside of the cabinet. The waterproofing outside the cabinet should be done well, and the moisture-proof inside the cabinet should not be ignored. The workmanship of the bath cabinet must be fine, and the stitching must be tight.

There are many ways to design doors and drawers: for example, installing magnets and adsorption switches on the doors, and using drawer springs to automatically rebound to ensure that moisture enters without holes.

If you want to do a good job of dry and wet separation, first of all, it is best to separate the shampoo and shower area into a wall to become a semi-open separation, and you can also use a glass shower room for design; To design a high-value bathroom, it is necessary to pay more attention to rich lighting, and to use multiple light sources in different locations, and to do a good job in bathroom waterproofing.

If possible, try to use glass doors or sliding door partitions. Shower curtains can also be used as partitions for wet and dry separation; High-value bathrooms should pay attention to color matching, dry and wet separation, and waterproof treatment.

When the bathroom is doing dry and wet separation, you can plan reasonably in advance and choose some materials with better waterproof as partitions; To design a high-value bathroom, you need to pay attention to the color matching of the bathroom and the arrangement of the bathroom.

Through the planning of reasonable space, the wet area and the dry area are successfully separated; Do reasonable planning, unify the style of decoration and bathroom, choose the right bathroom supplies, and make the sparrows small, but all the organs.