The network speed of the Huawei router slows down after being used for a period of time

Method steps.

1. In the case of ensuring the normal access of the router, set the "access mode" of the router correctly. The network operator provides the required information for the specific access method. This step is important and is the basis for subsequent operations.

2. Next, open the "Run" dialog box on one of the computers connected to the router (press Win+R to open), and enter cmd to enter the MSDOS interface.

3. Enter the command "ipconfig" in its window to get the default gateway.

That is, the IP address of the router.

4. Then type "ping -t" and press enter to view the packet.

**Information. 5. If you find that there is packet loss, it is recommended to replace the network cable between the computer and the router. Even if you cannot ping, you need to enable DHCP on the router.

6. Turn on DHCP service on the router: In the "Advanced Settings" tab, click "DHCP Server" and check the "Enable DHCP Service" item. At the same time, the computer must set the IP acquisition method to "Automatically obtain IP address".

7. Next, look at the "Domain Name Servers" in the "Running Status" tab of the router.

IP address. 8. Then enter the command "ping -t" on the msdos interface to test the packet sending.

9. When there is a "network timeout" prompt, it means that the network line is interfered by the line, or the network signal is unstable, which can only be solved by contacting the service personnel of the network operator.

10. If no data packets are received at all, it means that the router is using a static IP

The IP address of the computer is not registered at the time of binding. Solution: In the "Advanced Settings" tab and "DHCP Client" page, add the IP and MAC address of the machine.

11. There is also a situation, that is, for the situation of connecting multiple computers to the router, due to the fact that other computers in the same LAN watch movies and play games, etc., resulting in the network speed of the entire LAN.

12. Run the "Jusheng Network Management" program, and display the "Monitoring Network Segment" in the pop-up "Monitoring Network Segment.

In the window, create or use an existing CIDR block and click Start Monitoring.

13. Click the "Configure Policy" button to create a new restriction policy.

15. After clicking the "Enable Control" button, you can assign a restriction policy to the selected host. Right-click the corresponding host and select Assign Policy to Selected Hosts.

First, although the current Gigabit dual-band green wireless routers can assign 1 to 254 IP addresses, or can connect 15 to 40 devices at most.

However, if the number of connected devices is too slow, it will cause network congestion, and even network instability, and the possibility of network disconnection will occur.

Therefore, there are obvious differences in the processor and running memory size and cache size of different wireless routers.

The second point is that whether home broadband is 200m or 500m home broadband, compared to commercial broadband network data is not equivalent, that is, the upload speed is not the same as the ** speed, of course, there is no limit to the upload speed of home broadband in some areas, after all, this is only part of the region.

Take Xi'an as an example, the 200M telecom broadband upload speed is only 8M, which is the upload speed between 800 KB and 1M, although the **speed can exceed 25M per second, but it does not mean that the network of multiple devices will be connected through the wireless router, and it will always remain smooth.

Therefore, it is reasonable to set the IP address of the wireless router such as the allocation of the DHCP function reasonably, the IP address range, and the IP address is filtered, and the upload speed limit is set, which can be effectively solved.

If the Huawei router is left on all the time, it will indeed get slower and slower. You can turn off the router at night, or the Huawei router app and turn it off at regular intervals. If it really doesn't work, reset it.

Wired or wireless.

Dear, I have received your problem, and the solutions to the related problems are as follows: The causes and solutions of the low connection rate of Huawei routers are as follows: 1. Check whether the line connection is normal, whether the gigabit network cable is used (8 cores of network cable, 4 cores are 100 megabits), and check whether the connection between the water noise nano crystal head and the network port is good.

2. Check whether the speed limit function of the device is enabled. Log in to the router web and check whether Network Rate Limiting is enabled on the Terminal Management page. 3. Check whether the smart bandwidth function is enabled, log in to the router web, and check whether it is in the "fair competition" mode on the "smart bandwidth" page.

In addition, if you want to turn on other modes, you also need to check whether the speed test result is consistent with the actual bandwidth at home, if it is inconsistent, you can click "Reset" to modify. 4. It may be because the DNS server address of the computer is incorrect or the maximum transmitting unit (MTU) of the WAN interface is inappropriate. You can perform the following steps to troubleshoot the type.

Confirm that the DNS server address of the computer is correct.

The problem of mobile phone settings, choose on Huawei Digital, well, wifi and mobile network to reset the mediation can improve the network speed.

In this case, either the mobile phone configuration is not good, or the network signal is poor.

1. There is too much dust inside the Huawei wireless router, which causes the wireless router to slow down, so you need to turn on the router and use a hair dryer to blow away the dust. Weighing hood.

2. The voltage of the Huawei wireless router is unstable, which causes the wireless router to slow down, and you need to change the power socket.

3. The humid environment of the wireless router causes the wireless router to slow down, so you need to put the router in a dry environment;

4. The wireless liquid bucket router is difficult to dissipate, resulting in the slow speed of the wireless router, and the router needs to be placed in a ventilated and troubled development environment.