-
1) Turn off infrequently used services such as Wi-Fi, mobile network, Bluetooth, and GPS, and turn them on again when needed.
2) Turn off automatic synchronization and automatic update in the background.
3) Close unwanted background runners.
It is recommended to use "One-Click Cleanup" before standby and turn off the functions listed in (1) and (2). You can also use the offline mode to turn off the functions or turn the device on and off at a timed time before going to bed.
4) Reduce screen brightness (auto-brightness is recommended) and set a shorter auto-lock screen time.
6) Enable the machine's built-in power-saving function or third-party power-saving software for power management. (7) For specific operations, please refer to Settings -> General -> Power-saving Mode -> Power-saving Tips.
-
Answer: High power consumption, may be caused by too much background software, wifi and so on, you can use to clean up garbage frequently. It really doesn't work, just replace the battery.
-
AnswerThere are many factors that affect battery performance, such as: frequency of use, machine operation status (such as navigation, games, background running programs, etc., it is very power-intensive).
-
I think it will cost electricity after a long time, otherwise it generally doesn't consume much electricity, and it can also be adjusted to power-saving mode at ordinary times, and mine is also very durable after two years of use.
-
The battery does not need to be activated.
It may be that there are too many programs.
Or maybe it's too much garbage.
-
Sometimes it's really power-consuming, and it doesn't take long for it to run out of power, and you have to charge it a little fully.
-
If a ** is particularly power-hungry, then it proves that the CPU inside is too large.
-
According to the situation of your mobile phone, it is recommended to try the following methods to solve the problem:
1. Use the original charger and data cable to charge the phone for 20 minutes, and then press and hold the power button for 30 seconds.
2. Change to other chargers and data cables to try the mobile phone charging test cover.
3. Press and hold the volume up button and the power button at the same time in the phone shutdown state for 3 to 4 seconds, after the phone comes out of the vertical and boring vivo mobile phone logo, release the button to enter recovery mode, press the volume down button to select the system repair mode, press the on key to confirm **latest version and install Select an available and stable wifi connection The phone will start to detect the latest firmware package After detecting the firmware package, select ** and install it, because the firmware package of the general mobile phone is relatively large, generally above 1GB, You can connect your phone to a charger and connect it to a stable and fast wifi before doing the above.
4. Press and hold the lock screen button and the volume plus key at the same time in the shutdown state, release the lock screen button when the vivo interface appears, continue to press and hold the volume plus key, enter recovery mode, press the volume down button to select clear all data, press the ON key to confirm, and wait for the interface to jump, then press the volume down key to select Restart and press the ON key to confirm.
If you still can't turn on the phone normally after following the above methods, you can go to the local after-sales service center for testing and processing, and enter the vivo official website on the computer side - service - service outlets to check the nearest after-sales address and contact**.
-
Go to the after-sales service to see if it's a motherboard problem.
-
The newly bought mobile phone has a virtual battery and is unstable, so you can try it once you flush it.
-
God, 4 minutes a electricity, you're not satisfied, my electricity is faster than yours, I just bought it yesterday.
-
Many people say that their mobile phones are easy to turn off automatically, and when they have this situation, they complain that the quality of the mobile phone or the brand is poor. In fact, the automatic shutdown of the mobile phone is sometimes not a problem with the quality of your mobile phone, but some other reasons, let's take a look at what caused the automatic shutdown of the mobile phone.
The reasons for the general automatic shutdown may be as follows:
1. The protection circuit in the lithium battery is overly sensitive, so the current will be cut off as soon as it is large.
2 The battery itself is aged.
3. There is dirt on the metal sheet at the contact point of the battery, which causes poor contact with the power supply.
4 The joint between the battery and the mobile phone is prone to loosening.
If, after inspection, it is found that the first two problems are the first two problems, then it must be sent to a specialized repair shop for repair. If the latter two problems are caused by the oxidation of the dirty metal sheet of the battery, the situation will be improved as long as it is wiped clean with a glue stick. Putting paper or film between the battery and the phone can also solve the problem of poor contact caused by loose batteries.
-
According to the description, it is recommended to try the following methods to see if it can boot up:
1.Press and hold the power button for 10 seconds to force restart the phone.
2.You can try to charge Ye Zheng Jian for 20 minutes, and then press and hold the power button for 10 seconds to see if it can be turned on (there is no prompt for recharging the phone when it is completely empty).
3.When the phone is turned off, press and hold the volume up button and the power button at the same time for 3 to 4 seconds, after the vivo phone logo appears on the phone, release the button to enter recovery mode, first select wipe data factory reset, select wipe cache partition after waiting for the interface to jump to the cluster, and select reboot system now to restart the phone immediately after completion. (Doing this will lose all the data on your phone (except the data on the TF card), including installed apps, **books, text messages, etc.) When there is no other way to solve the problem, use this and use it with caution.
If the above methods still can't be turned on or the mobile phone has important data, it is recommended to take the mobile phone to the local after-sales inspection and processing, and the after-sales technicians will deal with it. You can go to vivo Guansong Pants Fang** to check the address of the after-sales service center.
-
It may be broken, it is recommended to rebuy.
You can fill in the mobile phone model in vivo official website**firmware upgrade package, fill in the mobile phone model in vivo official website--service--search** the firmware upgrade package corresponding to the mobile phone model, **do not unzip after good, copy and paste directly to the root directory of mobile phone storage, and then go to vivo official website--community--section to search for "vivo mobile phone Chinese (or English) recovery operation guide", follow the tutorial in the post.
The choice of these two mobile phones, the most direct is the comparison of appearance and photography, because the positioning is similar. Comparing these two aspects, vivos7 will be better. >>>More
Answer: Method 1: Send carrier SMS.
Method 2: Call the Bill Inquiry**. >>>More
The main difference between the X50 and S7 produced by vivo mobile phones is that in terms of processor, the processor is the core component of the mobile phone.
This depends on your own choice, the pixels of the current mobile phone are better, if you shoot, you can do a post-processing sequence software, post-grading, so it's more perfect.