How do you know the power of the computer, please come in

The landlord's request is difficult to fulfill. The power consumption of a computer varies greatly depending on the requirements of the software, and if you do an experiment, you can see that the actual power consumption fluctuates by more than 40%.

There are calculations in this web page.

Run dxdiag

Do you have to slowly find out the power of the hardware one by one, and then add it up.

There is software to see it.

In fact, how much power you use, it's probably this power, plus the monitor.

Wouldn't it be right for you to read the story

There are several steps to check the power supply power of your computer's main computer:

1. Open the main cover (side) of the desktop, and you can see an iron box in the upper left corner. This iron box is a desktop power supply, and the box is pasted with the corresponding parameter table, and we can clearly see that the maximum output power is 400W.

2. The maximum output power is 400W, which is actually greater than the rated power of the computer, and the maximum output power only means that the power consumption of the computer must not exceed the maximum of 400W, once it exceeds this limit, the computer will cause damage. The power rating is calculated from the parameters on the power box.

3. The ** parameters of the desktop power supply are different, and the rated power calculation method of the power supply is different: for example, the calculation formula of ATX is 5V output voltage * 10 = rated power. Another example is how to calculate ATX 12V

5V output voltage + 4) x10 = rated power.

You can check it through Master Lu.

Operation method: 1. First turn on the computer, find Master Lu on the computer, and click to enter, and click on hardware detection.

2. Then select Power Estimate at the bottom of the left rail.

3. After opening, it is to enter the following interface, and some do not choose to display and need to be manually selected.

4. Finally, you can see the power consumption after opening.

The following parameters are examined:

2.After installation, open the software. Hardware detection.

3.Click on the power estimate indicated by the arrow, as shown in the figure below.

4.Click on the final power estimate There are also two unknown items that need to be confirmed by the user, as shown below.

5.According to the actual operating cycle of the computer, you can know the power of your computer. Solved the problem of how to detect the power of the power supply, as shown in the figure below.

Do you know the power of the computer, so how can you know it, how to check the power of the computer? The following is how to check the power of the computer that I have collected, I hope it will be helpful to you

Method steps.

<> the beginning of installation, you can select the installation path (installed on the C drive by default).

Once installed, don't forget to remove any included software that you don't need. Then click Try Now to open the software.

When you open it for the first time, it will be a little slower because there is a process of detecting the new system software and hardware devices.

Click on the final power estimate There are two more items that are unknown and need to be confirmed by the user.

Because this laptop is installed with two hard drives, one is a 128g SSD and the other is a 500g mechanical disk.

Click on the drop-down menu

Select the SSD you are using, and the actual power used (2W) will be displayed.

Similarly, the size of the display cannot be automatically detected, and the user needs to manually confirm it and select 19 inches according to the actual situation.

Once all the sub-items have been determined, the software will automatically add up and arrive at a total power of 154 watts for the computer.

To determine the power supply power of the host computer, you can answer the following five questions:

1.Look at the power supply label: Power supplies will usually have a label on their enclosure that indicates the power information. The power on the label is expressed in watts (W), for example"500w"or"750w"。This is the most straightforward way to determine the power of the power supply.

2.Reference PC Specifications: PC manufacturers often list the power supply power of the console in their product specifications or manuals. You can consult your computer's user manual or find information about your computer model on the manufacturer's official website**.

These calculators will usually ask you to provide information about your computer's configuration, such as processor model, graphics card model, number of hard drives, etc., and then estimate the power required from this information.

4.Look at the power connectors: Looking at the type and number of power connectors can also give some clues about the power of the power supply. The high-power power supply has more connectors to support more hardware devices, such as high-end graphics cards or multiple hard drives.

5.Consult a professional: If you're still unsure about the power of your power supply or can't find the information, you can consult a computer hardware professional, such as a computer repair technician or salesperson.

They are usually able to provide you with accurate recommendations based on your computer's configuration and needs.

Summary: Determining the power of your PC's main computer can be done by looking at the power supply label, referring to your computer's specifications, using a power supply calculator, observing the power connectors, and consulting with a professional. For accurate results, it is best to combine multiple sources of information to confirm the power supply.