Many people choose solid wood beds, what are the disadvantages of solid wood beds?

It is very likely that the bed will be uneven, and it is also very likely to be deformed, which will be relatively expensive.

Although the solid wood bed is particularly good-looking, there will be a sound if the solid wood bed is used for a long time, and the solid wood bed needs regular maintenance, so as not to affect the use value and life of the solid wood bed, and the style of the solid wood bed is very different from the modern style, so when using the solid wood bed, you must pay attention to the overall decoration style of the family.

The disadvantage is that the thickness of each slats is uneven, and it is not particularly comfortable after sleeping.

Many people choose solid wood beds, what are the disadvantages of solid wood beds?

1.Moisture content of solid wood beds.

It can directly affect the change of the entire structure. If the dewatering treatment is not reasonable, it will cause the product to deform, which will shorten the service life. Solid wood beds cannot be exposed to sunlight for a long time during use, and the indoor humidity cannot change significantly.

If it's too dry, its products will stand out. If it is too wet, it will cause the product to get wet, which may cause the product to rot or insects. If the transverse strength of the solid wood bed is not enough, it is easy to crack at the glue joint.

2.The solid wood bed is environmentally friendly and durable, and the natural wood also gives a solid and warm feeling. The main disadvantage of solid wood beds is that they are easily deformed and difficult to maintain.

For example, direct sunlight, too cold and too hot, too dry and humid environment is not suitable for solid wood beds; If you are not careful when using, frequent switching on and off of the air conditioner will cause excessive changes in temperature and humidity, and even qualified solid wood bed products will sometimes deform and crack. The disadvantages of solid wood beds are also very obvious. If not properly maintained, it is easy to crack and deform.

In case of overheating or overheating, it is easy to crack and deform, so pay more attention to daily maintenance. It is also one of the main factors that put many consumers off. Each person chooses the right solid wood bed according to their own economic conditions.

After all, the bed is the place where everyone stays for a long time of the day, and the best for yourself within the economy.

3.Natural solid wood will have a natural fragrance, while synthetic board will use a lot of chemical materials, which is different from the fragrance of solid wood, but will have a pungent smell. Natural solid wood furniture.

It is a uniform material, and the sound of gently tapping the wood will be crisp. Imitation solid wood furniture is made of various materials, so the percussion sound is dull. Solid wood has a grainy feel, feels more textured, and won't dry.

The material of the solid wood bed is a key factor. The more precious the material selected, the higher the ** of the bed, and the different tree species will also affect the sense of use. Bed furniture made of pine wood is dozens of times lower than bed furniture made of mahogany.

In terms of quality, the performance of pine furniture may be worse than that of some wood-based panels, and it is necessary to paste solid wood veneer, and the quality remains to be verified.

The disadvantage of the solid wood bed is that the cost is very expensive, and it needs to be well maintained, and the weight of the maintenance support wooden bed is very heavy, which is very inconvenient when placing and moving, and the quality is likely to be not outstanding, and the style will not be very novel.

The solid wood bed is particularly hard to sleep on, and there will be small pimples on the body. Mites can also be generated. It's inconvenient to clean up, and it's easy to knock your head on. It is very dangerous.

The life is not long enough, sometimes it is deformed, and it is afraid of sunlight, and the humidity of the air will also affect the quality of the bed. And sometimes it gets moldy.

There are not many styles, the comfort is not enough, the color choice is single, there will be moths, it is very heavy, and so on are all disadvantages of solid wood beds.

The disadvantage is that it is particularly easy to deform, usually requires special attention, and the later maintenance is particularly difficult, the cost is very large, and it is very easy to crack.

There are at homeSolid wood bedThe embellishment always seems to be high-end and high-grade, but the scarcity is expensive, and the solid wood bed is often tens of thousands, which makes many ordinary people prohibitive. So how about a solid wood bed? Below we will bring you the advantages and disadvantages of solid wood beds, I hope to be able to help you.

How about a solid wood bed?

Advantages of solid wood beds:

1. Environmental protection and stability.

After the solid wood panel is painted, there is no unevenness of glue joints and slats on the surface, and the physical properties are relatively stable in the long-term use of premature blocking; The chemicals volatilized by the adhesive through the glue seam in solid wood panels are much lower than the volatilization of solid wood wide panels and solid wood laminated lumber, which is more environmentally friendly and healthier.

2. High utilization rate of wood.

The utilization rate of wood is high, which is in line with the principle of ecological utilization of raw materials. Therefore, in terms of use and texture color, solid wood panels are more suitable for the use and decoration of furniture;

3. No cracking deformation.

Because the core board is made of wood with small anisotropy, the uneven surface of the board and the degree of warping are small, and the upper and lower sides are covered with two planed thin wood thick veneers, which can better eliminate the uneven warping, cracking and deformation of the board surface, and can improve the physical strength of the board in all directions;

4. High-grade materials.

Selected large-diameter high-quality logs, carefully selected according to the texture and color, and manufactured by high-precision equipment and scientific planing methods. This processing technology is very good in terms of texture and color, and the texture is more prominent after painting, and the whole set of furniture produced can create a harmonious and high-end sense of value.

Disadvantages of solid wood beds:

1. There is a large difference in materials.

Due to the different textures and hardness of each slat of the panel, it is impossible to make the thickness of each slats consistent even by the thickness sander, resulting in the unevenness of each slats on the surface of the plate. After painting, the unevenness of the individual slats is more obvious.

2. Imitation collage is prone to errors.

Generally, the furniture produced by solid wood wide panels, looking at the paint surface of the furniture in the oblique direction of the backlight, you can see the height of the slats and the glue seams between the slats. If the material selection is exquisite and the process is scientific, this phenomenon will be smaller, but it cannot be fundamentally avoided.

3. The production process is complex.

In daily use, the surface of the solid wood wide puzzle is prone to unevenness, cracking of glue joints and other phenomena. Over time, these phenomena become more pronounced due to the humidity of the air. Moreover, the wider and thicker the width of the panel substrate, the more obvious the above problem phenomenon is.

4. **High.

The solid wood bed production process has high requirements for material selection, and the color, texture, growth and so on of the puzzle are the basic requirements, resulting in low wood utilization, large waste and high cost. In particular, the growth period determines the degree of hardness of the wood, which directly affects the size of the deformation probability during use.

How about the solid wood bed that is brought to you? The full content of the advantages and disadvantages of solid wood beds.

The bed is an indispensable item in our lives, it can allow us to relax the tired body to achieve the purpose of rest, and provide us with a good sleeping environment, so it is very important to choose a good bed. Now there are many types of beds, and the materials are becoming more and more abundantIs the solid wood bed good

As we all know, the materials used to make solid wood beds are all natural, with the advantages of environmental protection and health, which can help you create a living environment full of pastoral atmosphere. Solid wood beds generally do not add any harmful substances in the design and production, and there is no chemical pollution, which is in line with the current people's current concept of environmentally friendly life.

Because of structural problems, the solid wood bed has a good load-bearing capacity, is not easy to deform, and can have a long service life, which is an enduring best-selling commodity in the furniture industry. Many solid wood beds retain the original natural texture, and the texture can be used reasonably, making it an embellishment of the product, showing the unique charm of the product.

2. How to buy a solid wood bed?

1. Material is required.

The main cost of solid wood bed is the raw material of solid wood, the more precious the material selected, the higher the bed is made. Consumers without professional knowledge can grasp the principle that the harder the wood is, the more beautiful the wood grain, and the higher it is usually the same. Rare woods include rosewood, rosewood, nanmu, etc., which are common materials for high-end classical Chinese furniture and are difficult to find in the market.

The more valuable woods are teak, sorrel, rosewood, wenge, pineapple lattice, ebony, beech, maple, acacia, red sandalwood, oak, etc. Other more common woods are rubberwood, ash, liuan, pine, fir, paulownia, elm, oak, etc.

2. Safe to stay for a long time.

Safe and durable bed base can not fully guarantee comfortable sleep, only the bed base and mattress are well combined, in order to create a good bed and rest, when choosing a mattress, we should pay attention to the following two points: elastic hardness: everyone's sleeping habits are different, so the soft and hard needs of the mattress are also different, a good bed can automatically adjust the elasticity with the change of sleeping position.

Size: The length and width of the mattress should be sufficient, because everyone will turn over when sleeping, and there should be enough space for people to turn freely.

Solid wood bed is a more common furniture item in our life, and it is also a material that people choose more, and it is better to stay for him. I think you also know about the purchase of solid wood beds.

Nowadays, more and more people prefer solid wood beds because they are generous and sturdy. What are the advantages and disadvantages of solid wood beds? PChouse will take you to find out.

First, the advantages. 1. Natural, environmentally friendly and healthy, solid wood furniture reveals the beauty of nature and primitiveness, which is both natural and chemical-free, which is really a healthy fashion choice, in line with the psychological needs of modern urbanites advocating nature.

2. Solid wood furniture is solid and durable, the life of general panel furniture is years, and the service life of solid wood furniture is at least 6 times that of panel furniture.

3. Solid wood furniture generally has value retention, if the material is good and well-made, there is still a lot of room for appreciation.

4. Solid wood furniture generally has exquisite carvings, because wood is suitable for carving, and the products are exquisite.

Second, the shortcomings. There are two sides to everything, there is a good side and there is definitely a bad side, and finally it brings the disadvantages of solid wood beds to everyone. Like many solid wood furniture, the moisture content of solid wood bed can directly affect the change of the overall structure, and if the dehydration treatment is not reasonable, it can lead to product deformation, thereby shortening the service life.

The solid wood bed can not be exposed to sunlight for a long time during use, and the indoor dry and humidity changes should not be large, if it is too dry, it will make its products appear outstanding; If it is too wet, it will cause the product to get wet, which can cause the product to rot or insects.