If you want to judge whether a piece of furniture is solid wood, how should you judge it?

If you want to judge whether a piece of furniture is solid wood, you should judge by looking at the texture. Solid wood furniture is made of natural wood, and from the appearance, solid wood furniture has a natural texture and delicate feel. The end face of solid wood generally presents an arc-shaped texture of the growth ring, and the pattern of each section can be connected, while the end face of the veneer is generally parallel.

1.Generally, the surface of high-end solid wood furniture is only covered with varnish to maintain the beautiful wood grain of the log. Whether it is real solid wood furniture can be judged by whether the wood grain on both sides of the panel or cabinet door panel of a pure solid wood furniture is consistent, and whether the side pattern on the front of the furniture corresponds.

If the wood grain does not match, the chance of sticky skin is greater. Generally speaking, solid wood will have some natural defects, such as insect eyes, wallets, gum stripes, etc., so most merchants will choose to use clean and beautiful solid wood as the surface, and the defective parts will be used as drawer boards, back panels, side panels, etc., which is a cost-saving routine operation.

2.All solid wood furniture is made of real solid wood. All parts of the furniture are made of solid wood, no other forms of wood-based panels are used.

However, all solid wood furniture is expensive because of its high requirements for technology and materials. In addition, if all solid wood furniture uses the same wood, it can be called pure solid wood furniture, and different wood can be called solid wood splicing furniture. Pure wood has its own special fragrance, even after long-term storage or coating, there is still a smell, such as pine wood has a pine fragrance, cypress wood has a light fragrance, cedar wood has a spicy smell, camphor wood has a distinct camphor smell.

3.Pure solid wood has a natural color difference, and its color and texture are also different. Solid wood veneer furniture has few appearance defects and clear texture, even better than pure solid wood furniture.

Consumers can make full use of the grain and scars of solid wood to judge its quality, looking at the corresponding positions on the outer surface and on the back. If it corresponds well, it is pure solid wood. The above is the answer to the question of how to judge whether a piece of furniture is solid wood.

There is a fragrance, there will be a natural color difference, color, literature and science have a certain difference, you can knock a few times on the wood surface with your hands, the solid wood material will make a crisper sound, and the wood-based panel has a low sound. In addition, solid wood veneer feels very textured, while general artificial paper veneer feels dry.

You can listen to the sound, the sound is generally solid wood furniture, you can judge according to the wood grain, section or scab on the furniture, and you can also observe the density of the furniture, ** and cost performance.

First of all, it is necessary to see whether his manufacturer is regular, but also to see whether the quality of solid wood is good, you can look at it with experienced people, to see the density of the board, whether the material is solid wood.

It can be judged this way. You can see whether the furniture material is pressed or solid wood from the home section, and you can observe the material use through a corner of the furniture.

Solid wood furniture is generally made of logs, which will have the aroma of wood. It can be discerned by sniffing. Solid wood furniture will have wood growth rings on it.

You can judge by observing the texture of the furniture and combining it with your own experience.

We can touch it with our hands for five minutes, and the left and right hands will sweat, then it means that the furniture is not solid wood, if the hands are still dry after five minutes, then the furniture is solid wood.

How can you tell? I think it can be analyzed from several aspects:

1.Of course, it is the price, first of all, the real domestic mahogany is very expensive, how the price is very cheap, then it is definitely impossible.

2.You can look at the wood grain, look at the color, some are the color of the skin and then done, and the real mahogany is a lot different, of course, this needs to be seen more often, more observation.

3.Then I think the fragrance can also be distinguished, and the real mahogany fragrance will be different. And it's also relatively heavy.

Solid wood furniture is relatively fragile, in the state of rapid changes in ambient temperature and humidity is easy to crack, and the wood grain of natural log furniture is relatively natural and irregular.

If it is more regular, it is machine drawing, and then look at the depth of the pattern and the color of the pattern.

The general natural natural texture is relatively light, there will be no deep groove of wood grain, solid wood furniture will not appear first observe the corner of the two sides of the seam, if there are two layers that are pasted veneer, that is the patch furniture, no matter how well the treatment is in place can see the traces. Or observe the wooden structure inside from the hole of this screw, if it is relatively consistent, it is solid wood, and if you can see the sense of hierarchy, it is a patch multi-layer board.

Solid wood furniture is divided into solid wood composite furniture and pure solid wood furniture! There are two ways to make solid wood composite furniture, that is, the base material is MDF, paste solid wood veneer, and make solid wood furniture! These are the door core panels used for solid wood cabinets, and most of them are so!

Pure solid wood furniture is generally used to make chairs! Coffee table on the dining table! Finished furniture such as bedside tables is the majority!

These can be distinguished by a close examination of the edge strip texture! Solid wood furniture has irregular textures and scars! These can all prove to be solid wood furniture!

In fact, I think it is still necessary to distinguish different methods according to different furniture!

From a professional point of view, it should be distinguished from the following points!

1: Whether the surface texture can be consistent with the broken lines.

2: The surface of the log is very natural, there is no regular grain, and the light-colored paint surface will show natural color difference.

Three: Hitting the log by hand will make a dull sound, and the crisp sound or empty sound is generally a composite material.

If you want to judge whether these furniture is solid wood, you can first go to see **, because solid wood furniture is generally more expensive, and secondly, you can also look at the texture of this furniture, the texture of solid wood furniture is more delicate, it feels warmer to the touch, and there is a faint wood fragrance, and you can also go to see the weight, solid wood furniture is generally heavier.

Solid wood furniture generally has less texture, so at this time, you can see how much texture these furniture have, so as to ensure that you will not be deceived, so you must pay attention when buying.

You can touch it, you can also smell it, and you can tell if it is a solid wood furniture by tapping its texture with your hands.

Black walnut, chocolate color, light purple to dark brown, mixed brown light color difference texture, fine pattern, beautiful texture, fine polishing, the texture is very good, just like Dove chocolate. The furniture made of it is elegant, elegant, simple and elegant. Clause.

First, look at its texture. The texture of mahogany furniture of different materials is different, such as the high cotton pear wood that is often adulterated on the market, and its texture is relatively light, not as clear as the non-flower texture! The small bus flowers adulterated into the Burmese wood on the market are not as good as the Burmese flowers!

But for people who don't have much experience, how can they recognize "good wood"? Some people will say, why is this difficult? Anyway, the old material with high density and good oiliness is good wood.

That's true, but it's not comprehensive. Cross-section: The color of the cross-section is darker than the panel, and it can be seen that it is made of a single piece of wood.

Open the doors and drawers of the furniture cabinet to observe whether the wood is dry and white, and whether the texture is tight and delicate. If there is furniture made of materials such as particleboard, MDF and one-time molding board.

When it comes to wood materials, there are too many, people who don't know how to listen to the name can probably be dizzy, and many names are repeated referring to the same kind of wood, but the average person doesn't know much about which is the same kind of wood, but it just sounds very lively, and it's very messy, and I feel like I don't know where to start. I personally experienced, it is recommended to cut the model to see the lines, the contract should be marked on the furniture, the furniture is logs, spliced solid wood, high-density board, when it is found that the goods are not on the board, there is evidence to claim compensation.

Choose solid wood furniture, and after opening the cabinet door or drawer, smell it with your nose. Pure wood has its own special taste, even if it is stored or decorated for a long time, it still has a smell, and there are a lot of wood will preserve a faint taste, such as pine wood has the smell of pine resin, cypress wood has a light fragrance, the main materials commonly used in the traditional production of furniture are: pine, paulownia, birch, ash, ash, ash, elm, mahogany, rosewood, etc., in recent years, there are also some new wood species made of furniture are widely popular such as:

Oak, beech, black walnut, red cherry.

When choosing furniture, we can also use our hands to tap the sound, and we can distinguish it by the difference in sound. Usually pure solid wood furniture is a large area of the same piece of wood, and the sound made when knocked is very crisp; On the other hand, man-made panels are made up of a variety of substances because the materials used are made up, and the sound made when struck is very dull.

Smell the smell, the smell of solid wood cannot be imitated, there is a difference between fake and real.

Generally speaking, real solid wood furniture rarely has a perfect texture, based on the environment in which the wood grows completely naturally changes from time to time, and this change can be reflected in the appearance of the wood itself, so most of the solid wood furniture has natural color difference, and most of its textures have certain differences. Most solid woods have the natural aroma of wood. When purchasing, it can also be identified by the sound of hitting the wood surface by hand, generally speaking, solid wood furniture because the raw materials used are the same material, and it will make a crisp sound when knocking.

Buy solid wood furniture.

1.When choosing furniture, we can also use our hands to knock on the sound, and distinguish it by the difference in sound. Usually pure solid wood furniture is a large area of the same piece of wood, and the sound is crisp when knocked; On the contrary, since the materials used in wood-based panels are composed of a variety of substances, the sound produced by the striking is very dull.

The curvature and pattern of solid wood furniture can only be achieved by cutting, which wastes a lot of wood, so many companies are not very good at this kind of modeling. If the selected solid wood has a curvilinear shape, you need to pay attention. In addition, it is possible to check whether the wood grain is consistent before and after the same position.

Some wood grains have specific surface characteristics that cannot be imitated. The wood grain of solid wood furniture is very bright and smooth.

2.Generally speaking, real solid wood furniture rarely has a perfect texture. Based on the completely natural growth of the wood environment changes from time to time, and this change can be reflected in the appearance of the wood itself, so most of the solid wood furniture has a natural color difference, and its texture mostly has a certain difference.

Most solid wood has the natural aroma of wood. When purchasing, it can also be identified by tapping the surface of the wood with your hands. Generally speaking, solid wood furniture makes a crisp sound when struck because the raw materials are the same material.

We often think that the heavier the solid wood, the better the quality, but this is not the case. How to distinguish the real from the fake with solid wood furniture? The quality of solid wood does not depend on its weight, but on its stability and resistance to corrosion.

Teak, for example, is lighter, but it is stable and expensive.

3.Structural design of solid wood furniture.

Affect its stability and service life. Mortise and tenon structure.

Widely used in solid wood furniture, mortise and tenon structure furniture is a combination of the concave and convex characteristics of the original wood itself. Non-mortise and tenon furniture requires nails and screws to be made. Once nails and screws rust, corrode, fall off, furniture falls apart.

Therefore, furniture with mortise and tenon structure is undeniably stronger, more durable, and healthier and more environmentally friendly. In contrast to furniture with non-mortise and tenon structures, it can be used without various adhesives.

and manufactured with the help of glue.

First of all, we have to look at the cross-section, if the color is darker, it is solid wood. It depends on whether the surface is dry, whether it is white, whether the texture is delicate, you can also tap the sound, and then you can also smell the smell, if the smell is relatively large, it is not solid wood.

First of all, we must look at the pattern of the furniture, because the pattern of solid wood furniture is not the same, it is more scattered, and you can also look at the end face of the solid wood, which generally presents the arc texture of the annual ring type, and looks at the flaws of the cabinet.

First of all, you should buy through formal channels, and secondly, you can look at the texture of the furniture, you can also smell the smell of the furniture, and you can judge whether it is solid wood.