Can you make a glaze yourself?

Yes, in fact, the glaze is also a basic wax, but the maintenance effect is a little longer, and the waxing method is the same.

The new car has been maintaining the paint surface without polishing, the old car is recommended to go to the beauty shop to throw a light, remove the oxide layer in the glaze, more beautiful, the new car comes directly, generally once a month on the line, the car is too dirty and then wax, cross, waxing can remove stains, glaze to increase the hardness and brightness of the paint, decide which product to use.

1. "Sealing glaze" is a concept, both expensive and cheap, 300-2000 yuan can be called sealing glaze. Since it is "sent", it should not be sent "expensive". Only "cheap" ones will be sent. If you think about it this way, you can't talk about it.

2, New car, without polishing direct glaze, is not a problem. Why wear off a layer of new paint?

In short, the practice of the 4S store cannot be said to fool you.

3. Of course, you can do the sealing glaze yourself. However, there are some techniques that still need to be mastered. Otherwise, you won't be able to figure out the effect yourself.

4. You finally asked (if it is such a glaze wax, I want to know what I should pay attention to), this topic is relatively trivial, and it is not easy to explain in words.

My advice: do what you want, there is definitely no harm to the car paint. Only if you have done it yourself, you will not be fooled in the future.

You tell me?

The 4S shop did not deal with it strictly, and did not do it well for you, how do you think what you do on the car paint will not have an impact on the car paint! I recommend you or don't come by yourself, if everyone does it themselves, then they will be laid off long ago. If you do it yourself, if something happens, you will bear the loss...Can't make it!

It's only a two-month-old car, so there's no need to polish it! Just seal the glaze directly, it's not a good thing to polish more! In fact, the coating is better than the sealing glaze.

First of all, the landlord needs to know the process of sealing the glaze. The glaze must be polished, the oxide on the paint must be removed, the fine flower line is repaired, and the surface of the paint can be smoothed before the glaze can be sealed, otherwise the glaze sealing effect is not large. Does the landlord polish?

It is recommended that if the landlord is not very good at technology, he can still do it in a professional car beauty shop.

The glaze is similar to wax, but the composition is more silica! The main thing is to cheat the money of the Chinese people! In foreign countries, it is car wax and polish! Everything else is!

The car should be washed and cleaned, in a cool place, the wax on the car paint circle evenly painted, the first wax must be rubbed a piece! Otherwise, if you're tired, no one will wipe it for you! Other details are plastic, glass, and seams are not allowed to hit!

The last thing is that the wax must be wiped clean, otherwise you will know the consequences later!

A good car to seal the glaze is generally 100,000 is not necessary at all, it is a very ordinary metallic paint, and it is good to wax it often.

The glaze project is not as intuitive as the decoration, maintenance and other projects, whether it is good or bad, but with the first and the trial can be found, the glaze is just an invisible coat for the car, there is no intuitive effect. In fact, glazing is a very cumbersome project, the operation time is about 2:30---4 hours, 8 to professional processes, and each car needs about 60 ml of glaze (depending on the model).

The construction process requirements are strict, and the order is as follows:

Cleaning. Before sealing the glaze, it is a necessary procedure for vehicle cleaning, and the cleaning requirements must be strict, and neutral cleaning agents must be used, which must be clean and thorough, otherwise it will cause paint scratches when polishing.

Clay polishing, due to the long-term accumulation of dust, gum, flying paint, static dirt and other difficult to remove by cleaning alone. The cleaning must be done using a "decontaminated clay" sanding process.

Obscured. After cleaning, you can't enter the polishing process, and you should use tape to seal the lamps, door trims, rubber strips, door handles and other parts. Prevents abrasives from spilling on these parts during polishing, which is difficult to clean and affects the appearance.

Atomization. After the seal is completed, the vehicle should drive into the special glaze room, carry out paint atomization, and use a special atomization watering can to add "cooling pure water" to evenly spray on the paint surface to cool down the car body. Otherwise, during deep cleaning, the heat generated by the friction between the polisher and the paint will soften the paint surface, causing the paint surface to "wrinkle".

Deep cleanup. Car paint pore cleaning:

Just like the pores of people, the pores of car paint also have a lot of swag, which directly affects the adhesion of the glaze. Using an electrostatic polishing wheel and ultra-fine abrasive polishing and decontamination treatment, the dirt can be sucked out of the pores through the principle of electrostatic adsorption during low-speed polishing, and the pores of the paint surface can be thoroughly cleaned.

Restore and brighten treatment.

The use of special reducing brightening agent with reducing wave disc high-speed polishing, the heat of the paint hole is opened, the reduction brightening agent penetrates the inside of the paint, and the reduction reaction occurs, so that the bright and beautiful paint is restored as new, and the fine scratches of the body are completely smoothed.

Wax removal and cleaning. Use the wax remover detergent for automotive paint to clean the paint surface again, clean the float during polishing, and ensure that the paint surface is clean, dry and free of dirt, and then you can prepare for glazing.

Vibrating and glazing. This is the most critical procedure of the glaze sealing project, with a special vibrating polishing machine to squeeze the glaze into the pores of the car paint, forming a firm network protective layer, the glaze contains rich ultraviolet protective agents, so as to reduce the corrosion of solar radiation and acid rain snow melting agent.

Infrared light baking.

After the glazing is completed, the infrared baking lamp is turned on, and the lacquer surface of the glaze is baked, so that the glaze molecules are heated and better adsorption and penetration.

Dust-free grinding. Finally, use a special nano dust-free cloth to polish and wipe the paint surface, and tear off the masking tape. Such a brand new car is unfolded in front of you. At this moment, it is not allowed to clean or wipe the paint within 24 hours to prevent the absorption of the glaze.

Note: It is normal for dust to be adsorbed in bumpers, tires, wheels, etc. after glazing, and it is caused by static electricity. After 24 hours, as long as the vehicle is washed, the electricity will be dissipated when it encounters water.

The maintenance of the general car paint surface has waxing, glaze, surface coating and automotive plating, about this new project, we all know how much, today the author will first talk about the glaze.

What is the sealing glaze. Sealing glaze is to cover a layer of glaze layer on the surface of the vehicle paint, the main component of the glaze is the oil, according to the rapid vibration and friction of the application of the vibration and polishing machine, the glaze seeps into the paint department, and then produces a protective layer, which can reasonably maintain the paint.

The role and disadvantages of vehicle glazing.

Benefits: the glaze does not stick to the characteristics, so that the paint surface is not easy to dirty, can always be kept clean, after the vehicle glaze, the glaze layer can improve the strength and gloss of the paint surface, reasonable maintenance of the paint surface can be free from micro scratches, and at a certain level to resist the harm of the car paint, but also has the effect of anti-ultraviolet light, anti-acid rain, oxidation resistance, antistatic, corrosion resistance and washing resistance, etc., which can effectively reduce the roughness of the exterior of the paint, reduce the friction with the outside, and strengthen the maintenance of the paint surface. The older car seal glaze can make the air oxidize and fade the car paint to restore the gloss.

Disadvantages: Because the glaze is a petroleum substance, it has a certain amount of corrosion, which will also cause the air oxidation of the car paint, and the frequent sealing of the glaze will also cause certain damage to the car paint.

Sealing glaze is a substitute for waxing, but the maintenance interval is longer than waxing, generally around 3 months, if the daily maintenance is good, the car wash shop is less, it is okay to maintain most of the year, after sealing the glaze, it is possible to do without waxing within the year, the glaze is best to be vertical and cover 1-2 years to do once, the new car is not proposed to be non-glazed, after all, the quality of the new car paint is very good, there is no need to seal the glaze.

Millions of car purchase subsidies.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! According to your glaze once after no longer do the glaze, it's okay, the question is answered as follows, it's okay, this does not affect, you can not use the glaze in the future, it will not affect the paint surface, you can rest assured.

Warm reminder that your car is maintained on time, change the oil every 5000 kilometers, usually refuel to the regular gas station to refuel, such as Sinopec or PetroChina gas station refueling, so that the quality of the oil is guaranteed, can reduce the engine carbon deposit, reduce engine wear and extend the service life of the engine, I hope my answer can help you!

After sealing the glaze once, is it okay to stop sealing the glaze in the future?

Hello, this question can give you a perfect reply, wait for me to sort out the information, I'm typing, 2-3 minutes, don't finish.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding hello and solutions and solutions! According to your glaze once after no longer do the glaze, it's okay, the question is answered as follows, it's okay, this does not affect, you can not use the glaze in the future, it will not affect the paint surface, you can rest assured. Warm reminder that your car is maintained on time, change the oil every 5000 kilometers, usually refuel to the regular gas station to refuel, such as Sinopec or PetroChina gas station refueling, so that the quality of the oil is guaranteed, can reduce the engine carbon deposit, reduce engine wear and extend the service life of the engine, I hope my answer can help you!

It's okay, glaze sealing: The basic principle of glaze sealing is to rely on shock polishing technology to repeatedly press the glaze into the paint texture to form a special network protective film, so as to improve the gloss and hardness of the original car paint surface.

Automobile glaze sealing is just a propaganda concept, it is precisely because waxing has so many functions and effects, many companies that do topcoat maintenance have extended the concept of "glaze". Only 80 yuan is charged for waxing once, and the glaze can even be 1,000 yuan, and the main difference between the two is that the time to maintain the luster of the body is different.

During the visit, it was found that neither the owner nor the worker who did the glaze sealing did not understand what "glaze" was. The owner of the car said, I bought a car, and I will not miss the money for the glaze. The glaze sealing worker said that I have mastered the technology and earned money, and I will not think about what "sealing glaze" is.

If waxing is the first generation of car paint care products, then the sealing glaze can be said to be the second generation, and the car paint coating is the third generation of paint care technology, that is, a protective film with high hardness, good elasticity and anti-oxidation is coated on the surface of the car paint. The reporter heard another voice in a beauty shop, "In fact, my sealing glaze is a kind of plating, and in the same way, another layer is applied to the surface of the car paint." According to the car detailing technician, although there are differences in these names, the principle is still the same, but the materials used and the results achieved are different.

The professional car detailing sector has been struggling to find effective paint protection measures. Numerous experiments have proved that the perfect sealing of the paint surface can prevent acid rain, acid snow and ultraviolet rays from attacking the paint. It is undeniable that in this field, the progress of science and technology has brought a lot of benefits, but if consumers pay for it with various vague concepts and materials, it is a manifestation of the immaturity of the market.

Still going ... It's not like sealing the glaze once and for all!! At a certain time, the glaze is gone!! Sealing glaze is a kind of high-grade waxing!!

The principle of sealing glaze is to act on the surface of the paint to isolate the paint from ultraviolet rays and air, so as to achieve the purpose of protecting the paint surface, and the protection of the paint surface is good, but the paint surface has no dependence on the sealing glaze, and there is no negative impact on the paint surface if the construction is not continued in the later stage.

According to the situation, the glaze is sealed once every three months, and the waxing is done once a month.

It depends on the paint protection of your car, and you generally don't need to go.

In fact, there is not much difference between glazing and waxing, both of which are one-time and do not last long, just like baking oil for hair. Whether you go or not does not affect your health.

It is not recommended to do waxing and sealing glaze for new cars, because the factory paint is the best, and the sealing glaze and waxing will polish the car paint to a fine degree and damage the original car paint.

Waxing and glazing are suitable for cars with an age of more than one year.

Peace be upon you!