How to do car sealing film, how much is the van sealing glaze, how much is the film

The basic principle of glaze sealing beauty is to rely on the shock polishing technology to repeatedly press the glaze into the paint texture to form a special network protective film, so as to improve the gloss and hardness of the original car paint surface, so that the car paint can better resist the invasion of the external environment, effectively reduce scratches, and maintain the brightness of the car paint. Before sealing the glaze, it is necessary to observe the paint surface of the vehicle in detail, the new car does not need to polish, because the new car has a layer of original car wax before picking up the car, protecting the paint, and it needs to be cleaned with washing and pulling water when picking up the car, and the paint surface is very smooth and clean, so there is no need to polish, but the new car is the most important thing to seal the glaze immediately after picking up the wax, which plays a role in protecting the brightness of the original car paint, and generally the new car will form an oxide layer on the paint surface if it does not do paint care after 60 days. But for the old car, the paint surface is not smooth, there is an oxide layer and other dirty paint surface must first polish the whole car, although the polishing wears the paint, but it is not much wear, mainly depends on the degree of damage to the vehicle paint.

Some vehicles only need to clean the body after washing, or polish with water or microcrystalline grinder, polishing is to avoid the oxide layer forming an isolation between the glaze and the paint surface, affecting the glaze sealing effect. Compared with ordinary wax, the sealing glaze has obvious advantages in gloss, wear resistance, paint protection effect and durability. In terms of gloss, the gloss of the car using glazing technology can reach more than 95.

In terms of wear resistance, the sealing glaze can form a hard protective layer on the surface of the paint layer to prevent the wear caused by wind and sand weather, sediment splashing and long-term car washing, while ordinary car wax is only attached to the surface, the protective film is very thin, and the wear resistance is low. Precautions for sealing the glaze After sealing the glaze, special attention should be paid to: Remember not to rinse the car with water within 8 hours after sealing the glaze, because during this time, the glaze layer has not completely condensed and will continue to penetrate, and the rinsing will wash away the uncondensed glaze.

Try to avoid washing the car after the glaze is done, because the product can be anti-static, so the dust can be wiped off with a clean and soft cloth. Do not wax again after glazing, because the wax layer may adhere to the surface of the glaze layer, and the sealing effect will be affected by the isolation of the wax layer when adding glazing. About automotive coating When it comes to automotive glazing, it is natural to associate automotive coating.

Automobile coating products are actually basically the same as the original material of automobile glaze products, but the form of expression is different, the sealing glaze is mostly a kind of emulsion as the carrier of the performance, and the automobile coating is mostly the performance of the water agent as the carrier, the glaze and the film are to crystallize the process, from the principle analysis, the production process is different, the construction method is also different, but in addition to the relatively new car paint, whether it is the automobile coating or the automobile glaze, it must be treated by grinding or polishing process to achieve the best effect, Therefore, in view of the similarity between automotive coating products and automotive glaze products, we often refer to them together as automotive glaze coatings.

Car glazing. The glaze sealing is to use soft wool or sponge through the high-speed vibration and friction of the vibration and polishing machine, and use the unique permeability and adhesion of the glaze to strongly penetrate the glaze molecules into the surface of the car and the gaps in the paint. The body paint after sealing the glaze can achieve or even exceed the original paint effect, so that the old car is updated and the new car is brighter, and at the same time has the characteristics of high temperature resistance, sealing, oxidation resistance, brightening, washing resistance, corrosion resistance, etc., in general, it can play the role of anti-oxidation, anti-corrosion and anti-impact.

Automotive coatings. Paint coating technology is the world's first generation of paint protection technology. The real automotive coating should be an inorganic coating, that is, a crystal glass coating that will never oxidize.

Only the inorganic coating is the coating layer covering the surface of the car, which will not be oxidized by external factors such as ultraviolet rays and acid rain and disappear. The coating layer has a certain hardness, which can reduce some small scratch marks.

It is worth mentioning that the normal car paint can only be polished about 6-10 times, and even if it is a qualified beauty product, there will still be more or less corrosiveness, which will accelerate the aging of the paint surface and destroy the surface of the car paint.

Hello! Need to go through multiple processes, polishing, glazing, vibration, waxing, polishing, I wish you a happy car! If my reply can help you, please help choose it, thank you very much!

It is to attach a kind of film, stretch it completely with heat, and fit it completely to the car shell!

Go to the car beauty shop to do it. Thank you.

Hello! You can't do this by yourself, you need to go to a professional store to do it. Hope it helps.

The so-called car sealing glaze and coating are deceptive, there is no need to understand If you want to understand, you will know if you drive to experience it The coating process is much more complex than uranium sealing.

If you don't need it, a few hundred dollars is enough.

Sealing glaze is to use soft wool or sponge through the high-speed vibration and friction of the vibration and polishing machine, and use the unique permeability and adhesion of the glaze to strongly penetrate the glaze molecules into the gaps of the automobile surface and paint. The body paint after sealing the glaze can achieve or even exceed the original car paint effect

Sealing glaze should first do mirror treatment on the paint surface, then wax removal, glaze after air drying, glaze sealing machine after glaze curing, vibrating and polishing coating sealing two, one emulsion and one AB agent, the construction of emulsion and sealing glaze is the same, the construction of AB agent should be well deployed, and it can be wiped while spraying after adjustment.

Hello! If the old car has slight scratches that can be treated, polish and remove the stain first, and then wax, and then seal the glaze after waxing, and it is recommended to wash the car after 2 days after the glaze.

Hope it can help you, and if you find it helpful, please ...... it^

Waxing and sealing

Glaze and coating are the three forms of lacquer surface beauty, and the principle of action of these three forms is the same as dao.

It is a certain material to act on the surface of the car paint, so that the paint is isolated from ultraviolet rays and air to achieve the purpose of protecting the paint surface, but because of the difference in the products and construction technology used, the action is very different, the simple understanding of waxing belongs to the maintenance category, the glaze is to protect the category, the coating belongs to the maintenance category, and the protection time of the coating is much higher than the waxing and glaze, it is for this reason that the paint coating is popular, mainly highlighting the role of two aspects, The first is to increase the oxidation resistance of the paint surface, the second is to increase the hardness of the paint surface, and the gloss and smoothness of the paint surface are also greatly improved.

If you want to do coating, there is no need to do glaze, before the coating or during the coating process, the glaze is a snake to add to the painting, if you have sealed the glaze and want to coat, just wait for a few months, and then do the coating when the glaze effect is weakened, and the coating will have no effect on the effect of the coating immediately after the glaze is sealed.

The coating is also reproduced on the car surface.

The dough forms a protective layer of wax. with plating

The membrane machine will have zhi with negative ions

Liquid wax, evenly sprayed onto the paint, because the liquid wax has static electricity, so it will be automatically adsorbed to the paint, the electronic coating carried out by this coating machine is more tightly combined with the paint than the usual manual waxing, and the duration is longer than the usual waxing time. The effect of the coating can be maintained for more than a year, but it is difficult to exceed two years.

Coating beauty is generally more expensive, it is to form a transparent protective film on the body, its protective ability is better than waxing and glazing, and the retention time is generally about 1 year. The material of the membrane itself is an inorganic substance and has no damage to the car paint.

Waxing the first generation of beauty products.

It lasts for a long time and is easy to oxidize.

The second generation of sealing glaze beauty products lasts longer than waxing, but it cannot completely protect the paint from oxidation, and its main principle is to protect the paint by filling the paint pores.

The third generation of coated beauty products lasts for about 1 year, completely isolates the paint from the air, forms a protective film, can effectively prevent the oxidation of the paint surface, and improve the hardness of the paint, but it should be maintained regularly in the middle.

Go to Dr. Turtle Car Detailing Shop, where the technicians are professional and enthusiastic.

。。。Sealing glaze = high-grade waxing... Coating = higher grade waxing... Just choose one of them...

Hello, if your car is polished, it can be coated, and then coated after sealing the glaze is actually not very useful.