Can a new car be glazed Does a new car need to be glazed

Don't block !! Don't listen to the !! on the second floor either. What a car must do before getting a production license is a climate test and a road condition test!!

What kind of roads, high temperatures, sprays, ice and snow are strictly tested and passed to be a mature model!! The chassis of the car itself is sealed! The seal they talked about outside was straight for you!!

But the seal is so thick, they won't tell you about factors that affect the heat dissipation of the car!! Poor heat dissipation will bake the electronic components in the car, and the life of electronic components will be short in the case of high temperatures!! Haha you should know!!

The manufacturers who should have done it have done it!! Otherwise, it will affect his reputation!! The ones out there are all for profit!!

And then there's the car at the auto show!! There is absolutely no glaze sealed!! I represented Volkswagen Audi at the Beijing International Auto Show, and the car was clean!!

At most, it's waxing!!

Have money to buy a car on the first floor and don't have money to do maintenance for the car? It's not good for any car to get into your hands!

The new car can be glazed, to give you a simple example!

You've seen the auto show! The show cars in the auto show are bright, they are all new cars, they are all glazed, otherwise the paint will not be so bright!

Well, when the new car leaves the factory, it has taken protective measures to protect the paint film, which is basically the best effect. There's no need to spend money to get it again, just make the decorative film that you can do. The key is to take care of it.

No matter how good the coating glaze is, it will not be used for life, and it will not last long if it is not well maintained.

The new car does not need any chassis armor, glaze, seat cover, etc., at most a film.

Think about it, it's okay to use a car for more than ten years, maybe when you change the car, what are you doing? The car paint is rubbed a little bit and has to be re-sprayed, and the glaze is not in vain.

If your car isn't going to be used for more than twenty years, you don't have to.

When I first bought a new car, I encountered a problem, that is, how to maintain the car, especially the maintenance of the car paint. More common car paint maintenance and maintenance projects include polishing and waxing, sealing glaze, surface coating and crystal plating. For the glaze, many car buyers ask whether the new car must be glazed?

Is it better to seal the glaze or plating the new car? Let me explain this series of problems to you.

Do new cars have to be glazed in the first place? I feel that the new car is not to seal the glaze, the general new car paint quality is very good, and then the new car in the factory contains a layer of original car wax, if it is to seal the glaze, it is necessary to grind off the original car wax, which will produce consumption, and the proposal is to wait for the original car wax to subside and then consider carrying out the glaze. But some people feel that even if the glaze can reasonably maintain the paint, the vehicle that has just been bought needs to be maintained in advance, in case of injury later, which can be regarded as something to say, some cars with thicker paint are not necessarily glazed, and the problem of not sealing the glaze for a year is not big, for these cars with thinner and softer paint, it is also possible to consider the glaze, so that the paint can be maintained faster.

For glazing and crystal plating, is it better to seal the glaze or plating the new car? In terms of strength, the strength of crystal plating is higher than that of sealing glaze, and it can better maintain the paint from scratches; In terms of function, the role of crystal plating is increasing; In terms of longevity, the long-term plating of crystals is longer, and it can generally be maintained for about a year, while the rock or glaze is only maintained for about 3 months; In terms of price, crystal plating is more expensive than sealing glaze, the price of crystal plating is about 1500-400 zero yuan, well-known brands are more expensive than cost-effective, and the price of sealing glaze is generally a few hundred yuan; On the construction of the project, the crystal plating has higher requirements for the staff and engineering construction conditions, and the construction time of the project is longer, generally two days, and the relative address of the glaze sealing demand can be carried out within two hours. To sum up, each has its own good, according to their own market demand and hobbies, as well as economic development to decide on glaze or crystal plating.

Millions of car purchase subsidies.

It is indeed better to glaze the car than not to do it. However, to glaze a new car, it also depends on the paint surface of the car. Some brand models have a hard paint surface, and the glaze is not sealed in the first year, so there is no big problem.

However, when encountering models with soft paint, it is still necessary to make a glaze to protect the paint.

Automobile glaze sealing is to use soft wool or sponge through the high-speed vibration and friction of the vibration and polishing machine, and use the unique permeability and adhesion of the glaze to strongly penetrate the glaze molecules into the surface of the car and the gaps of the paint. The body paint after sealing the glaze can achieve or even exceed the original paint effect, so that the old car is updated and the new car is brighter, and at the same time has the characteristics of high temperature resistance, sealing, oxidation resistance, brightening, washing resistance, corrosion resistance, etc., in general, it can play the role of anti-oxidation, anti-corrosion and anti-impact.

Sealing glaze - as the name suggests, after multiple processes of treatment, a protective film similar to the outer coating of pottery products is formed on the surface of the car paint, which has the functions of ultraviolet insulation, anti-oxidation, high temperature and acid rain. A glaze beautification on a new car can prolong the service life of the paint and slow down the fading; Of course, if the old car glaze can be sealed, the effect is more obvious, because one of the processes can make the oxidized and faded car paint restore and brighten, quite a refurbishment effect. Most of the prototypes at the auto show have undergone this treatment, so they look crystal clear and brilliant.

Because the special tools used in glaze beauty can make the twist be heated and squeezed into the pores of the car paint, its durability is much stronger than ordinary waxing and other beauty processes, and it can be maintained for about 1 year even if no treatment is done. If you can make sure that you have these care done every three or four months, you can look like new for many years. The glaze is slightly expensive, according to the grade of the car and the old and new conditions, generally, the new car needs about 500 yuan, and the cost of the old car is between 800 and 1500 yuan.

<> "In addition to the most basic waxing, sealing glaze and crystal plating are also the maintenance methods that the majority of car owners like in high cavities, they are more durable than waxing, and the effect is also very good, but the cost is higher, probably between thousands of pieces. Glazing used to be very popular, but now few people glaze cars.

Personally, I think the glaze is not worth recommending now, the glaze is on the basis of waxing, using wool or sponge through high-speed vibration and friction of the shock and polishing machine, the polymer glaze penetrates into the pores of the car paint, so as to form a protective film, because the car paint and the car glaze are interpenetrated, the paint can not be waxed in the future, and the glaze must continue to be sealed.

In addition to the most basic waxing, sealing glaze and crystal plating are also the most preferred maintenance methods for the majority of car owners. They are more durable and effective than waxing, but they cost more, ranging from a few thousand pieces. Glazes used to be popular, but now few people glaze cars.

Personally, I don't think the glaze is worth recommending. On the basis of waxing, through the high-speed vibration and friction of the vibrating polishing machine, the polymer glaze is penetrated into the front pores of the Jianji collapsing paint with wool or sponge, so as to form a protective film. Because the car paint and the car glaze penetrate each other, the paint surface can no longer be waxed in the future, and the sealing glaze should be continued after the circle.

Millions of car purchase subsidies.

The new car does not need to seal the glaze, the new car has the original protective film on the surface, there is already a layer of protection, and the glaze can be sealed for two years. There is also a certain damage to the car paint caused by the sealing glaze.

Sealing glaze refers to the use of soft wool or sponge through the high-speed vibration and friction of the vibration and polishing machine, and the use of the unique permeability and adhesion of the glaze to strongly penetrate the glaze molecules into the surface of the car and the gaps of the paint.

The body paint after sealing the glaze can reach or even exceed the effect of the original car paint, so that the old car is updated and the new car is brighter, and at the same time has the characteristics of high temperature resistance, sealing, oxidation resistance, brightening, washing resistance, corrosion resistance, etc., and also lays the foundation for future car beauty, baking paint and refurbishment. Sealing glaze is a substitute for waxing, and waxing is generally not required within half a year after sealing glaze.

Glazing steps. The operation time of glazing takes about 4 to 5 hours, and the following are the five processes of glazing:

1.Neutral cleaning.

Don't look at it as just cleaning, but it's very particular. The cleaning agent should be neutral, because the alkaline cleaning agent will corrode the car paint, if it remains in the crevices of the car body, the corrosiveness will be even greater, it is recommended that you use a neutral car wash to avoid damaging the car paint.

2.Clay sanding.

Because the long-term accumulation of dust, gum, flying paint and other dirt is difficult to remove by cleaning, so the surface of the cleaned car paint is still rough and rough, which requires a comprehensive sanding treatment with a "decontamination clay" extracted from fine volcanic ash.

3.Deep cleanup.

Just as the pores on the human ** need to be cleaned, the pores on the car paint also need to be cleaned. An electrostatic polishing wheel is used with a brightening agent to generate static electricity while spinning, sucking out the dirt from the pores. At the same time, the brightening agent penetrates into the interior of the paint and undergoes a reduction reaction, which can achieve the effect of brightening the paint as new.

Another effect of polishing is that it smooths out fine soft scratches on the surface of the paint.

4.Vibrating and polishing the glaze.

This is a key step in the beauty of car glazing. Under the extrusion of a special vibrating and polishing machine, the crystal glaze is deeply pressed into the pores of the paint, forming a strong net-like protective layer that adheres to the surface of the paint. The protective agent is rich in UV protectants, which can greatly reduce solar radiation and resist the erosion of chemical components such as acids and alkalis.

5.Dust-free grinding.

Finally, the body is sanded with dust-free paper to make the paint as bright as a mirror.

First of all, the new car has the original protective film, and according to the manufacturer's recommendations, there is no need to seal the glaze;

Secondly, whether it is a new car or an old car glaze, there is a certain damage to the car paint, although it looks good, but in fact, it is not beneficial to the protection of the car;

Finally, I personally suggest that you can do a layer of crystal coating, and then do the sealing glaze, which not only protects the car, but also takes into account the aesthetics;

There is no need for a new car, it is recommended to do it after half a year, but in terms of effect, the coating is better than the sealing glaze, and it is also more expensive!

No, after opening for a period of time, polishing and waxing can be done, and then sealing the glaze after two years!!

New cars, when they leave the factory, are waxed, and they can start waxing after half a year.

No, the glaze is generally needed after the car has been used for a period of time.

The need to seal the glaze is the same as we touch cosmetics, and the glaze can be well protected by the glaze.

Do not wax or glaze within a year. After one, do a coating every year! After waxing and sealing for a long time, the paint will be darkened and oxidized!

Before understanding the "sealing glaze", let's first understand the main components of the "glaze", the "glaze" is actually paraffin, and its components are synthetic resin and polytetrafluoroethylene. The principle of "sealing glaze" is to rely on the shock polishing technology to repeatedly press the glaze into the texture of the car paint to form a special network protective film, so as to improve the gloss and hardness of the original car paint, so that the car paint can better resist the invasion of the external environment, effectively reduce scratches, and maintain the brightness of the car paint. Compared with ordinary wax, the glaze has certain advantages in gloss, wear resistance and durability, but it will not be like some manufacturers claim that there is no waxing for a year, generally after two months, the glaze will begin to oxidize, and it will be completely oxidized after 6 months.

It is also important to understand here that the reason why waxing and "glazing" make the car look shiny is not that the paint is protected, but that the subtle scratches in the paint are filled in, thus reducing the diffuse reflection of light and giving the impression that the paint has been renewed. The body needs to be polished and ground several times before "glazing", and no matter what process and material is used, it will cause damage to the car paint. Therefore, the new car is not suitable for "sealing glaze".

The main benefits of sealing glaze treatment for cars include that the paint surface of the car is resistant to high temperature and acid and alkali, and will not be oxidized by ultraviolet radiation and air, which is more convenient to maintain. Therefore, for car owners who have just bought a new car, it is indeed much better to make a glaze than not to do it.

However, whether the new car should be glazed or not, mainly depends on the paint of the vehicle, some brand models have a hard paint surface, and the glaze is not sealed in the first year, which is not a big problem; However, when encountering models with soft paint, it is still necessary to make a glaze to protect the paint.

Waxing is fine every 2-3 months. Pay attention to the following.

1. Don't wax casually in new cars. Some car owners wax the vehicle after buying it back, which is not advisable. Because the paint layer of the new car itself has a layer of protective wax, premature waxing will remove the original wax on the surface of the new car, resulting in unnecessary waste, and there is no need to rush to wax within five months of the new car purchase.

Second, it is necessary to master the waxing frequency. Due to the different environments and parking places of the vehicles, the time interval of waxing should also be different. Generally, there are garages to park, and vehicles that drive on good roads are mostly waxed every 3-4 months; For vehicles parked in the open air, it is best to wax every 2-3 months due to wind and rain.

Of course, this is not a hard and fast rule, and it is generally possible to wax again when the body feels unsmooth when touched by hand.

3. It is best to wash the dirt and dust on the exterior of the body with water before waxing. Remember not to use dish soap and soapy water blindly, because the sodium chloride contained in it will erode the body paint, wax film and rubber parts, causing the car paint to lose its luster and the rubber parts to deteriorate. If there is no special car wash water, you can use clean water to wash the vehicle, wipe the car body dry and then wax.

Fourth, the car should be waxed in a cool place to ensure that the car body does not heat up. Because as the temperature rises, the adhesion of the wax becomes poor, which will affect the waxing quality.

5. When waxing, apply an appropriate amount of car wax to the sponge block, and apply it in a straight line on the car body, and do not pour the wax liquid on the car or do circle coating; A job should be completed continuously, and the coating should not be stopped; Generally, the wax layer is evenly coated and polished with a new towel for 5-10min, but the fast wax should be polished while coating.

6. After the body is waxed, there will be some car wax left in the gaps in the lights, license plates, doors and luggage compartments, etc., making the body look very unsightly. If the wax dirt in these areas is not wiped off in time, it can also cause rust. Therefore, it is necessary to completely remove the wax scale after waxing, so as to get a perfect waxing effect.