Which is environmentally friendly, blister board or MDF cabinet door? Why?

Nowadays, many people pay more attention to environmental protection when decorating, so they will also pursue environmental protection when making cabinet doors, so blister boards.

And MDF cabinet doors that are more environmentally friendly? It is believed that the cabinet door of the blister board will be more environmentally friendly, because the blister board is a non-toxic, odorless, highly transparent colorless thermoplastic engineering plastic, and the board of this material is used.

It will be more environmentally friendly to make cabinet doors. <>

1. High-density board.

What is the difference between blister board and blister board?

1. The characteristics are different. The color of the blister board is usually rich, and the wood grain is very realistic, it is not easy to crack in the process of use, and it is almost not deformed, it is one of the materials of the cabinet that is heat-resistant, stain-resistant, and anti-fade, and it is very simple and convenient for daily maintenance. When there is a change in the high-density version, the stability is also relatively good, and the internal organizational structure.

It is delicate and has a particularly dense edge.

2. Different uses. Blister boards are usually widely used in interior decoration, automotive interiors, home appliance shells, mobile panel doors, automotive supplies, sporting goods and other fields of blister packaging. High-density boards, on the other hand, are commonly used in the furniture and construction industries, as well as in the manufacture of automotive cabins. <>

2. What are the advantages and disadvantages of blister board and high-density board?

1. a blister board. As mentioned above, blister boards are not easy to crack during use and have tensile strength.

The bending strength and compressive strength are relatively high, but due to the large rigidity of the internal molecular chain, the water absorption rate of the blister board is relatively small, and the shrinkage rate is also relatively small, such as not resistant to ultraviolet rays.

Light, that is to say, the blister board is usually more sensitive to heat, and if it is exposed to water for a long time, it is easy to cause hydrolysis and cracking of the board.

2. High-density board. Because the high-density board is a wood-based board, it will be cheaper, and the surface of the MDF is usually flat and delicate, without insect eyes and other problems, so the decoration is relatively strong, and the nail stability and holding are relatively strong, and it is not easy to crack, and can sound insulation, heat preservation, mildew and so on. <>

The blister board itself is a density board, and the blister board is more environmentally friendly, because it is made of plastic, and the pure natural material is processed and synthesized, which is an emerging plastic material.

Of course, MDF is more environmentally friendly. Because this MDF is made of high-pressure, it has higher density, greater strength, and is less prone to damage, so it is stronger to use.

Of course, MDF is more environmentally friendly, and it will not cause any damage to the body, and the overall effect is also very good, and it is also very strong.

Advantages: The manufacturability of the MDF in the cabinet blister door panel, the surface of the blister door panel can also generate a variety of three-dimensional shapes, which can meet the different needs of different customers for style. The substrate of the blister door panel is not easy to deform, and has good environmental performance, delicate appearance, wear-resistant, scratch-resistant, high-temperature resistant, and flame retardant performance.

Disadvantages: The surface of the cabinet blister door panel is PVC film, so the performance of high temperature resistance is poor, and the service life is relatively short. It is better not to smoke in the kitchen, the temperature of the cigarette butt can burn the surface film of the sheet.

Blister door panels also have a place called molded door panels, it originated in Germany, so it is also called German molding, but no matter which name they are essentially the same, the basic process is the use of MDF as the base material, engraving machine milling pattern molding, fine grinding and then spraying special glue, the surface of the second grinding is covered with PVC film by vacuum blister machine blister.

Monolithic cabinets, also known as:"Full kitchen"It refers to a cabinet combination composed of cabinets, electrical appliances, gas appliances and kitchen functional appliances. It is characterized by the organic combination of cabinets and countertops, kitchen appliances and various functional components, and according to the kitchen structure, area, and individual needs of family members in the consumer's home, through the overall configuration, overall design, overall construction, and finally form a complete set of products.

Cabinet maintenance skills: avoid the water on the countertop flowing down and soaking into the door panel, the door panel hinge and handle are loose and abnormal, should be adjusted in time or notify the manufacturer for maintenance.

1. Substrate quality identification method.

The quality of the substrate directly determines whether the cabinet door panel has the ability to eat nails twice, the ability to hold nails, the deformation degree of the finished blister board and the environmental performance of the finished blister board. A good blister door panel substrate is different from the ordinary substrate in density, the best way to distinguish is to choose a small piece of the same size of the plate, weigh it, the blister door panel with high density will be relatively better to hold the nail, and the deformation is smaller.

2. Membrane quality identification method.

The quality of the film directly determines the grade and performance of the finished blister door panel. A good blister film should reach a certain thickness, the film skin should be evenly taped, and the color should be stable. If the thickness of PVC film is low, there will be white and orange peel on the surface when pressing the corners, and some manufacturers choose to reduce the pressure of the blister machine in order to deal with these two phenomena, which reduces the problem of white and plate deformation to a certain extent, but cannot ensure the stickiness of PVC film skin and substrate.

The main problem caused by the uneven adhesive of the film skin is that the PVC film skin and the substrate can not be adhered normally, and the PVC film itself cannot be pressed with the substrate with glue by the blister machine, and the glue must be rolled on the back during production, which we call the adhesive backing, whether the adhesive is uniform or not, and the quality directly affects the viscosity between the PVC film skin and the substrate. The color problem is the most noticeable problem of the finished blister board, and yellowing is an inevitable problem, but the stability of the PVC surface texture and color must be guaranteed, otherwise it is very likely to fade during the wiping process of normal use.

3. Surface treatment of blister door panels.

The surface treatment is related to the overall image of the finished blister board. If the orange peel phenomenon is severe, the whole door panel will appear darker (orange peel refracts light), and the high-gloss blister door panel is very noticeable in this point.

4. The workmanship of the blister door panel.

This is the most troublesome problem that can be used in the process. It is mainly manifested in the adsorption at the corners, if there is a glue opening phenomenon, then this blister cabinet door panel may occur in the process of water absorption deformation and PVC membrane skin cracking problem. When choosing, you can use your fingernails to pick the part of the PVC film and the board with some force, and the workmanship (including the adhesive and the adhesive glue is good) will not appear to be picked off with a little force.

Through the above introduction of whether the blister cabinet door panel is good or not and how to identify the quality of the blister door panel, we must have a deeper understanding of the blister cabinet door panel, and when purchasing cabinets in the future, even if the business blows the sky dark, you can also be as stable as Mount Tai, not being influenced by the business Your will and understanding of the blister door panel.

1. Rich colors.

The blister board cabinet is rich in color and has a large selection space, which can meet the requirements of different consumers for color texture.

2. Three-dimensional modeling can be done.

The blister board cabinet can be made into a variety of three-dimensional shapes according to the production needs to meet the needs of different customers for style.

Disadvantages of blister board cabinets.

1. Easy to deform.

Because the blister board cabinet is made by hot pressing treatment, there will be thermal expansion and cold contraction, and it is easy to deform.

2. Poor high temperature resistance.

Because the surface of the blister board cabinet is PVC film, the high temperature resistance of the blister board cabinet is poor.

Nowadays, many users are very particular about materials and strive to be environmentally friendly. Among them, the blister door panel is deeply loved by the public because of its beautiful shape. So, are blister door panels environmentally friendly?

How to choose a suction service door? I believe this is what many friends want to know. In fact, there are many brands of blister door panels, and the environmental protection coefficient of the best brand is relatively high.

Let's learn the relevant knowledge of blister door panels.

One. Are blister door panels environmentally friendly?

1.National standards for environmental protection.

For the release of formaldehyde, the national standard is: to meet the requirements of GB18584-2001. Formaldehyde emission from the cabinet (formaldehyde emission .

In general, the environmental protection of blister door panels is an all-round concept, which is far from being covered by the "formaldehyde does not exceed the standard" that constitutes the cabinet panel.

2.There are differences between different brands.

We all know that the kitchen is a crucial occasion in the family and is closely related to the food we eat every day. However, in the face of the very different blister door panels on the market, many owners will be deceived by the advertisements of the merchants. Therefore, in the question of whether the blister door panel is environmentally friendly, it is still more environmentally friendly for those big brands to start and slow noisy blister door panels, such as choosing Millennium Boat, Rabbit Baby, Shengda, Moganshan, Dawang Coconut, these are very good brands, all of which meet the national environmental protection standards.

But for those unknown brands of blister door panels, there is no accurate answer to whether it is safe or not.

3.Precautions.

In fact, those unconventional brands of blister door panels and cabinets contain benzene, radon and other harmful substances in addition to formaldehyde. There are even some black-hearted merchants who will attract everyone's attention with low prices, resulting in owners who lose more than they lose. Therefore, in order to avoid such a phenomenon, we must not be greedy for small gains!

Two. How to choose furniture panels?

1.Is it better to import plates?

When choosing furniture panels, many consumers will be entangled in whether imported panels or domestic panels are better. However, according to expert analysis, the current plates of our large domestic enterprises will not be worse than those imported. Therefore, owners only need to choose furniture panels at the right price according to their economic strength.

2.If the edges are neatly sealed, can formaldehyde be sealed?

In our real life, many salesmen will introduce you and say: "The edges of our plates are very tight, so that the formaldehyde is sealed inside and cannot come out, and less is released to the home." If the edge sealing of some small manufacturers is damaged, you have to be careful, and the formaldehyde has come out.

In fact, this is often a marketing method for merchants, in fact, there is basically no difference in their formaldehyde content.