Ask for a quote for wall removal and repainting of latex paint

It's very careful, but it's going to interfere with your thinking patterns and make simple things complicated, so that you can make your money. It should be like this: the original wall eradication (3 yuan flat) this is optional depends on the wall situation of your personal home 2, white cement treatment (2 yuan flat) this can be dispensed with depending on your personal situation.

3. Green frog glue (this is not needed, the wall has been done by the first two, do you still need glue sticky putty?) + Nippon special putty 3 times (14 yuan flat) (What is Nippon special putty?) Does Nippon Paint make putty powder?

Isn't that lying to you. Brush Nippon Paint Yongdeli Super Easy Clean Odorless Latex Paint (14 Yuan Ping) This depends on the labor cost of the place where you live, and what Nippon paint you use, a total of 33 yuan square, which is too high. But people also have to make profits, and the emperor doesn't have workers in vain, right?

General shovel. Shovel, scrape (putty), coating all wrapped in our side is 16 yuan, without latex paint.

If you go through the renovation company, it will definitely be a lot more expensive (almost half the price)!! The link is basically right, that is, it is too expensive. The original wall is removed (1-2 yuan flat) white cement treatment Nippon special putty 3 times (6-10 yuan flat), brush Nippon Yongdeli super easy to clean and deodorized latex paint (5-10 yuan flat), a total of 13-20 yuan square.

If it's all-inclusive, it's about 20 yuan per square meter, which is the material you mentioned above, and if it's expensive, it's killing you.

Find your own workers. The material is seven or eight pieces per square. Salary of fifteen yuan per square to the end (shovel. Scrape, coat the whole package).

Dear, hello, I'm glad to answer for you, how much is a square scraping putty for shoveling wall skin and brushing latex paint, scraping putty is 14 yuan, latex paint is 6 yuan a square in general, about 14 yuan, latex paint is about 12 yuan, so that it is relatively reasonable, and it depends on the effect after completion, the key is the number of polishing and speculation, that is, the thickness of the paint film. In addition, there will be certain differences in different places, so it depends on the actual situation of the local area. 1. Single scraping putty is 8 yuan per square meter (including wire box installation), first of all, the wall is painted with gypsum leveling, and the flexible putty is scraped twice in batches, and the labor and materials are contracted).

2. Wall area = practical building area times. Among them are bathrooms in addition to kitchens, windows and doors. If the house is about 100 square meters and the wall area is about 250 square meters, you can take a detailed measurement.

3. Scrape putty with latex paint 12 yuan per square meter, and shovel wall skin plus another yuan. If it is a home decoration, including wire box installation, wall stucco plaster leveling, yin and yang angle straightening, batch scraping of flexible putty, 200 watt light grinding, finished product protection, spray painting of latex paint twice).

Hello! The method of quickly shoveling off the latex paint on the wall is as follows: 1. Take water to wet the latex paint on the wall, so that the wall can become soft, and then use a shovel to remove it.

2. Spray the special paint cleaner on the wall, wait for about half an hour, and use a shovel to remove the latex paint. 3. After wetting the wall with water, use the grinding wheel to grind off the latex paint on the wall.

When the old house is painted with latex paint, the paint on the original wall is better than the nuclear car, do you still need to remove the paint on the original wall? Can you paint old walls directly? The original wall foundation at home has good strength, and it is a latex paint wall, so you don't need to shovel off the wall skin, you can directly paint it with simple sanding, cleaning and repair.

It should be noted that the integrity of the original wall paint film should not be damaged, and latex paint with better adhesion should not be used, otherwise the wall will easily peel off.

If the old wall of the <> home is melamine, if you want to repaint, you must scrape off the old wall skin or paint the wall, and then repaint the putty powder, and then paint it after polishing. Don't cover the dark paint with light paint, paint the wall with white paint in advance, and then wait for the paint on the wall to dry white before you can paint the color paint again. If the domestic economic conditions allow, it is recommended to do it again.

If you buy a wall that has not been renovated for a long time, then when dealing with the wall, it is possible to keep the original wall, do not completely shovel it, and let the owner use a steel brush, sandpaper or grinder to polish the wall, and then brush the latex paint.

For shoveling wall paint, you only need to shovel to the cement layer, if the cement layer is pulverized, cracked, and peeled off, you need to shovel out the red bricks and finally repaint the wall. See if there are any large-scale cracks or "cracks" on the wall. You can try to dig a hole in the wall with nails, because the loose layer of sand in the wall can dig out the sand, so it is necessary to shovel the wall and shovel off the red bricks.

Tear down the walls and check for large areas of empty barrels. Before processing and construction to the base layer, the original old wall must be cleaned up, and the bad wall must be thoroughly cleaned, and the wall that has been brushed with latex paint must be polished after disassembly, and the skin and dust on the wall must be removed after polishing.

To fill a small part of the wall with depressions and cracks, you can fill in with plaster, and make sure the wall is smooth and clean before painting. In order to avoid the problem of peeling and cracking of the wall after painting, the environmental protection interface agent can be brushed after the wall base layer is repaired, and the putty can be brushed after the interface agent is dry, so as to ensure that the new coating is closely integrated with the original base layer.

The removal method of wall latex paint can choose different schemes according to the actual situation. Here are a few common methods:

Shovel off after softening the sail: Use a professional latex paint softener to spray on the wall, then wait for a certain amount of time, and then carefully shovel off the old latex paint with a paint scraper, which can achieve a more thorough removal effect.

Sandpaper machine grinding and removal: use a reversing chamfering sander for car beauty or a handheld vibrating sander to polish into a thin layer on the surface of the old paint; Attention should be paid to safety and noise issues during operation, and continuity should be ensured without misalignment or foreign objects getting in.

Spray gun cleaning and removal: The use of high-pressure aqueous solution for neat cleaning and removal of attachments other than thawing usually requires high technical standards and matching requirements for the strength and quality of the substrate.

Use a brush and water to rinse down: If you want to keep the original primer on your wall, you can use a brush and water to slowly and firmly brush the wall latex paint off after soaking it, but be careful not to brush it from top to bottom to avoid water entering hidden areas during the process.

Please note: When performing the above method, please be sure to wear a mask and glasses to avoid inhaling harmful gases or dust. In addition, before painting the wall, it is recommended to evaluate the condition of the substrate, the proportion of ingredients, the ambient temperature, etc., and maintain the standard operation, and adopt a high-efficiency and durable inexpensive mainstream strategy.

If you don't understand something, it is recommended to find professional construction personnel or relevant departments for guidance.

If the wall latex paint has dried thoroughly, it will be difficult to shovel off. However, if there are only some stains or scratches on the surface, you can clean it with the following source methods:1

Detergents: Walls can be cleaned with special detergents or soapy water. Wipe the wall with a damp cloth first, then with detergent or soapy water, and finally wipe it clean with clean water.

2.Eraser: If there are some small stains or scratches on the wall, you can gently wipe it with an eraser, but be careful not to scratch the wall.

3.Sandpaper: If there are stubborn stains or scratches on the wall, you can use sandpaper to gently grind it, but be careful not to grind through the wall.

If the wall latex paint has aged or is peeling off, it needs to be repainted. You can first use a shovel to shovel off the aging or peeling parts, then use sandpaper to polish and smooth out, and finally re-apply latex paint.

One,Mechanical removal of latex paint wallsBrush it with a wire brush, then roll the water to the wall 2 times with a roller and then use a shovel. After shoveling, stick to the wall with a large brush to remove floating dust. Try to brush it well.

II,Mechanical removal of latex paint wallsConfirm the materials and plan for the full batch before repainting the walls to avoid repeating the same mistakes.

Wall paint, the last layer, often referred to as latex paint, is one of the main decorative materials used to decorate the walls of the home décor.

Three,Mechanical removal of latex paint wallsPutty on the wall must be removed from mechanical devices that do not have a direct effect. It can only be removed manually. The method is relatively primitive and very laborious.

To speed up, you can use a little water on the bottom of the putty to soften the putty. After the bucket, it saves effort and time.

Four,Mechanical removal of latex paint wallsSpray water evenly with a watering can on the wall, sprinkle 2 or 3 times for one or two hours each time until the wall is completely moist (be careful not to exaggerate, the main wall is absorbed by water and does not come out to avoid penetration on the wall) then open the door and window to the surface and wipe dry with a spatula.

1. Start by using a roller to take water and wrap it once or twice.

2. Putty sheets can be used. The cement layer can be seen on the sheets.

3. Another way is to use an angle grinder to remove the top layer. If it is a common paint, is a concrete, use rollers to stain the water (no problem, if you brush 10 square meters at the same time), completely break the walls, then you can quickly remove them with no dust.

4. If the painting is good, the water resistance is strong, or the use can only be used with a knife or other sharp tools for the first seal, the blade is pulled down from the mouth after brushing the toothwater, the wall is completely filled, and then it can be placed. Remove the shovel.

5. The wall should be cleaned. Before renovation, the old wall must be treated with a wall foundation. If the spray is severe, it must be removed completely.

** After that, use white cement. The original wall is too soft, and once the paint is removed, it should be polished and the unadhered ** removed to facilitate the bonding of the new paint to the wall.

6. Primer is essential. The function of a wall primer is to resist alkali and moisture, seal the substrate, protect the top layer, and improve the texture and hiding power of the top layer. For the renovation of an old house, the wall must be used as a primer.

If the paint is applied directly, the wall will easily form foam and shape in the future. When the sun shines for a long time, it is easy for the silver imitation to change color.

If you are also meeting in your homeMechanical removal of latex paint wallsYou can get it for free