What paint is good for cement floors? What is the method of painting cement floors?

What kind of paint is more wear-resistant to the cement floor of the workshop, which can withstand the rolling and wear of tires. For example, factories, workshops, garages, warehouses, etc., household cement floors are not within the scope of this discussion.

<> common industrial floor paint is epoxy floor paint, epoxy paint is varied, widely used, electronics factories and parking lot ground will be used, wear resistance is also relatively high, but epoxy paint can not be directly painted on the cement floor, the ground needs to be polished first, and the epoxy floor is divided into primer, halfway, surface and other processes, the need for professional construction personnel, there is no paint that can be directly brushed on the cement floor, no need to polish the ground, high wear resistance after brushing, no peeling damage, And can you take a forklift trailer?

Oily one-component floor penetrant (product name) is such a material, in fact, strictly speaking, it is not a real paint, it is a low-viscosity and high-solidity curing resin, mainly by penetrating into the concrete to solidify the formation of a hard sealing layer, is used to solve the cement floor sand and ash a product, so it can be directly brushed on the unpolished cement floor, and has a high hardness and wear resistance, hardness up to 5h, suitable for the environment of frequent driving.

Epoxy floor paint.

Solvent-based epoxy floor paint has the following advantages: the whole is seamless, easy to clean, and does not accumulate dust and bacteria; The surface is smooth and colorful, which can beautify the working environment; The ground is non-toxic and meets the requirements of hygiene; With anti-slip properties, the parking lot ground needs to have a certain roughness, and the general cement floor is difficult to meet the requirements.

Solvent-free epoxy floor coating has the following advantages: high bonding strength with the base layer, very low shrinkage rate during hardening, and not easy to crack; The whole is seamless, easy to clean, and does not accumulate dust and bacteria; High solids, one-time film thickness; Solvent-free, low construction toxicity, in line with environmental protection; High strength, abrasion resistance, durability, can withstand the crushing of forklifts, carts and other vehicles for a long time.

Strong resistance to penetration, strong chemical corrosion resistance, and good tolerance to oil; Cured at room temperature to form a film, easy to maintain; The surface is smooth and colorful, which can beautify the working environment, the ground is non-toxic, and meets the requirements of hygiene.

Scope of application. Epoxy flooring has been used for functional flooring from the beginning: such as anti-corrosion, wear-resistant, and anti-slip, to general-purpose ordinary industrial flooring; In addition to the functional requirements, it also has a decorative effect. On the basis of the wide application of industrial flooring, with the continuous improvement of people's living standards, it has been popularized and applied in home decoration.

Epoxy flooring has the characteristics of strong acid and alkali resistance, wear resistance, pressure resistance, impact resistance, mildew resistance, waterproof, dustproof, anti-slip, anti-static, electromagnetic wave and so on, with bright and diverse colors and easy cleaning. It adopts a one-time coating process, no matter how large the area, there is no connecting joint, and it is also a dust-free material, with strong adhesion, abrasion resistance, strong hardness and other characteristics.

Epoxy flooring is widely used in electronics factories, machinery manufacturing plants, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation, aerospace bases, laboratories, offices, supermarkets, paper mills, chemical plants, plastic processing plants, textile factories, tobacco factories, candy factories, wineries, beverage factories, meat processing plants, parking lots and other surface coating. It has been accepted and used by many domestic manufacturers.

There are two types of cement floor paint sold on the market, ordinary floor paint and epoxy floor paint, both of which can play a role in protecting the performance of the cement floor, but in terms of protecting the staying power, the epoxy floor paint has more advantages, it has corrosion resistance, wear resistance, moisture-proof and waterproof performance, which is incomparable to other ground paints, therefore, epoxy floor paint is a good partner for cement floor.

1. To brush the cement floor, the ground ready to be painted with cement floor paint should be cleaned, (no river sand and no dust) The thorough way is to sweep the dust with a broom first, and then drag it again with a mop.

2. The cement floor should be mixed with cooked tung oil and pine perfume according to the proportion, and then evenly mixed and brushed on the ground. This can effectively enhance the adhesion between the cement floor and the putty.

3. At present, the putty used in decoration is divided into gypsum putty and blood putty: the deployment method of gypsum putty is: gypsum powder, cooked tung oil, pine perfume, tap water, according to 16:

Mix in a ratio of 5:1:6, stir well and use.

The preparation method of blood putty is: pig blood and large white powder, according to the ratio of 16::56, of course, in order to enhance the waterproof and wear-resistant performance of putty, it is also necessary to mix a certain amount of cooked tung oil.

4. The putty used to brush the cement floor must be mixed evenly, and the putty will be scraped to the ground with a shovel blade to the ground where the paint has been brushed in advance, and it is generally more appropriate to scrape two to three articles, in short, the ground can be scraped flat, and then after the putty is dried, it is polished with 80 mesh sandpaper, and the floor paint can be brushed.

5. In the process of painting floor paint, it is necessary to pay attention not to be greedy, and the floor paint should not be applied too thick to avoid wrinkles. Floor paint is not one can be brushed, generally need about two times, in the second time to make sure that the first paint is all dry, with floor wax varnished, so that it is done.

1. Is it enough to use "cement floor paint" or general paint?

2. Does floor paint refer to a set of paints or just buy a bucket?

3. Is it better to use a brush or a roller for painting?

4. How many times should I brush it?

5. How should they be operated correctly?

6. What color (dark and light) is recommended for brushing cement floors?

It is important to keep close to the color of furniture, door frames and other large items. In the end, coordination is the main focus.

Addendum: How many square meters can be brushed with an ordinary 5 kg (6 liters) bucket of paint?

Conventional home coatings range from 150 microns to 200 microns and can be up to 300 microns or higher.

Cement floors can be painted, but the cohesiveness, wear resistance and anti-slip properties of paint (or cement paint) are poor, and they are generally not used now.

Do the math how much it will cost you to renovate your home

When we decorate the interior, the floor decoration is usually the focus of the house decoration, and many people will lay wooden floors or tiles on the ground to make the ground more beautiful. However, the cement floor of many factories will choose to paint, so what kind of paint is painted on the cement floor, and the following article will introduce it to you.

What paint to paint the cement floor.

Cement floors can be painted with epoxy floor paint. At present, there are two kinds of paint suitable for cement floors: ordinary floor paint and oxygen floor paint, although these two paints can protect the performance of cement floor, but in terms of protection durability, there is no doubt that epoxy floor paint is better. Epoxy floor paint has excellent corrosion resistance, wear resistance and moisture-proof and waterproof performance, and its floor paint is incomparable, so it is good to choose epoxy floor paint.

What are the advantages of floor paint.

1. Excellent abrasion resistance and no seams.

There is a certain difference between floor paint and wood flooring, which is usually brushed on the material above the floor, so it does not produce any joints, which can make the floor more beautiful and the whole floor look smooth and flat.

2. Anti-corrosion and dust-proof.

Because of the close of its own material, the floor paint has a certain anti-corrosion performance, so many rooms are protected by floor paint.

3. Easy to maintain.

The ground paint pin is painted on the ground without any joints, and at the same time it is smooth and smooth, with excellent corrosion resistance and dustproof performance, so it is relatively simple and convenient in terms of maintenance.

Can epoxy floor paint be used for home improvement flooring.

Epoxy floor paint is a chemical product, itself is stripped by petroleum, because it may contain heavy metal color paste, theoretically non-toxic, but long-term family residence or some daily contact will also have a certain impact, such as: barefoot walking, directly sit on it and play with children, etc., at the same time, indoor air circulation is poor, the taste is difficult to volatilize, it is best not to recommend use.

Enter the area and get the decoration for free**].

Paint the floor directly on the cement floor.

Of course, the best paint choice for cement floor is floor paint, which is mainly used on the ground with strong pressure resistance and wear resistance, and it is suitable for use on cement floor. Floor paint can not only choose different ground colors, but also prevent the problem of sand and ash on the ground in the later stage.

The method of cement floor painting construction

1. First of all, you need to wash the cement floor, and then let it dry.

2. Use the weight of 1:00 tung oil and rosin perfume to mix into paint, and evenly brush the paint to the ground, so as to enhance the adhesion of the cement floor and putty.

3. A layer of putty should be brushed on the ground before brushing the paint, so we need to mix the putty evenly first, and then scrape it to the ground where the paint is brushed with a shovel, about 2-3 times, whichever is the case.

4. After the putty is dry, it should be polished with sandpaper and then brushed with floor paint.

5. It is advisable to brush the floor paint thinner to avoid wrinkles. After the first coat of paint, wait until it has dried before you can brush it a second time. The paint is completely dry, varnish with floor wax so that the paint is done!

Precautions

1. If it is a newly paved cement floor, in order to avoid alkali return during construction, resulting in discoloration and falling off of the paint film, the cement slag and other adherents on the cement floor can be removed with a shovel and then cleaned.

2. The cement floor should not be too thick, to avoid drying, blistering and other problems, after each brush, wait for the paint to dry and polish before painting, the painting interval is more than 24 hours, should be polished thoroughly and then painted again.