-
When sowing, it is necessary to pay attention to the seeds before planting them in the soil, and after sending them into the soil, they should also be properly watered, and then watered a lot after it germinates, and some fertilizer should be prepared for the roots, and attention should be paid to removing small insect pests.
-
First of all, you need to choose the right variety for sowing, you need to choose the right land, you must pay attention to temperature and humidity, these are very critical, pay attention to the nutrition of the soil, top dressing on time, prevent pests and diseases, and be sure to spray pesticides on time.
-
Clause. 1. Temperature factor. The rubber tree at home is not well developed because of too much light, and the rubber tree is most suitable for growing at room temperature, and the temperature should not be too high.
There is also the rubber tree is more afraid of cold, pay attention when it is too cold in winter, try to keep the rubber tree warm. Clause.
2. Water and fertilizer management. When the weather is hot, you should water more, but in moderation, you can't see stagnant water in the potted plant, and don't water too often when it's hot in the past. When planting rubber trees, it is also necessary to apply proper fertilizer, unlike other crops, it only needs to apply nitrogen fertilizer, nothing else, but it must not be fertilized when the weather is cold.
This will make the markings of the rubber tree thinner and make the oak tree look better.
-
It is necessary to ensure that the seedlings are free of insect pests and the planting environment is good, the soil for planting rubber trees needs to be fertile, so that the rubber trees can receive sufficient light, and the rubber trees should be watered and fertilized every day to ensure the healthy growth of the rubber trees.
-
First, the breeding method:
.Potting soil:Rubber trees will have higher requirements for potting soil, which needs to be slightly acidic sandy soil in addition to good drainage and air permeability.
If you don't know how to configure, you can mix sandy soil, garden soil, and humus soil into soil in equal proportions for planting. Of course, you can also go directly to the flower shop to buy the prepared breeding soil.
Lighting: Although the rubber tree is a shade-tolerant plant, in order not to affect its growth, we should not keep it in a shady environment for a long time, because this will easily cause it to wither and yellow. In daily life, full light can be carried out, as long as the sun is not very hot, if it is very hot, it needs to be shaded.
Temperature: The optimal temperature for the growth of rubber trees is 20 to 30 degrees, so as long as the daily temperature is kept in this range, there is generally no big problem. But if the temperature is lower than five degrees, it will die or stop growing, and if the temperature is too high, it will wither.
Watering: The demand for water of rubber trees is not very high, so it is generally watered once every three to five days, and the potting soil is watered thoroughly. But the temperature is very high and the water evaporates quickly, so you should water more to avoid the rubber tree from being dehydrated and yellow.
2. Precautions:
1.If the rubber tree is cultivated outdoors, then it needs to be moved indoors during the rainy season to avoid excessive moisture in the root system, which will form stagnant water and cause it to die.
2.Pots for planting rubber trees can be 20 to 30 cm in diameter, not too small, too small will affect its growth. At the same time, the pot in which it is planted needs to be able to breathe and drain water.
-
What should I pay attention to when <> spring planting oaks? How are oak trees grown? The growth level of oak seedlings is directly determined by the quality of the soil, and if the soil and growth environment are better, then the growth rate and level of the seedlings will also increase.
In terms of soil, oak trees are not strict and can be grown on a variety of soils, but soft and aerated soil is selected for seedlings to be planted. For oak planting, it is necessary to choose high-quality fields with flat terrain and good drainage. Because there is more water in summer, well-drained fields can avoid stagnant water and prevent tree roots from rotting.
Oak seedlings require a lot of fertilizer to grow, so in the early stages of oak planting, farmers should apply a lot of fertilizer so that the oak tree can thrive.
Oak trees are water-loving plants that require a lot of water during planting, so farmers should irrigate oak trees in conjunction with the amount of precipitation during the rainy season, both to ensure that the oak tree receives sufficient water and that the oak tree is not eroded by standing water. Oak trees are virtually undisturbed by pests, so farmers can not think too much about this aspect, but they should not completely ignore it. As a tropical plant, oak trees love light and heat, so it is necessary to give oak trees enough sunlight, and in winter, the temperature of the place where the oak tree is located should not be lower than 10 degrees Celsius, otherwise it is not easy for oak trees to survive.
The best of the seedlings is related to the growth and survival of the seedlings after planting, such as not paying attention to the selection of the seedlings, the seedlings carry a large number of germs, pests, resulting in the outbreak of pests and diseases after planting, resulting in the death of seedlings.
The root system of the seedling is too small, not because the original root system is small when growing, but when transplanting and transporting, the root system of the tree is artificially cut off too much, resulting in the root system being too small, so that new roots cannot germinate or cause rot after planting, resulting in death after planting. Too little pruning results in too large transpiration area, which disrupts the water balance of the tree, and eventually leads to death due to over-living. There are also other possibilities, even if you plant from a new pot may also cause the plant to grow unaccustomedly.
Just like us humans, we go to different places and live differently. In addition, changing pots also depends on the season, and the growth environment of plants may be different in different seasons. Therefore, when we accompany the seedlings, we must observe the growth environment, fertilizer, water and sunlight of the seedlings, and pay attention to its growth.
-
When planting, we must pay attention to the temperature, we must choose excellent soil, we must choose fertile and well-drained soil, we must pay attention to the spacing when sowing, we must do a good job of seed seedling, we must soak the seeds in water for about 4 hours in advance, and then we should water and fertilize in time, plant in March or April, transplant in May, and do a good job of soil insecticide.
-
Attention should be paid to the choice of soil, but also to the growth rate of oak trees, to the propagation of seeds, to understand the management aspects, to pay attention to the methods of planting, and to do a good job of drainage. Sandy soils need to be chosen, then watered, planted in a humid environment, and then managed to ensure the survival of the oak trees.
-
Attention should be paid to sowing seeds on sunny days, and to ensure the fertility of the soil, ploughing the soil in time, and doing a good job of keeping warm. After the oak tree is planted, it is necessary to ensure the fertility of the soil, timely fertilization, do a good job in field management, ensure sufficient light, and properly water, and timely drive away pests and diseases.
-
In order to learn the cultivation methods and precautions of rubber trees, we must first prepare the soil suitable for the growth of rubber trees, place it in an environment with suitable temperature for maintenance, and pay attention to mastering the method of watering and the frequency of fertilization. In addition, it is necessary to properly repot and change the soil, prune it in spring, and turn the pot every half a month when it is maintained in the sun.
Rubber trees grow more luxuriantly in loose, fertile soils with good drainage and aeration. When planting rubber trees in a potted home, you can choose humus soil: garden soil:
The ratio of river sand is 1:1:1 to configure, and some basal fertilizer can also be added.
The suitable temperature for the growth of rubber trees is between 20 and 30, so in the case of extreme temperatures in summer and winter, it is necessary to pay attention to the best temperature control work for rubber trees.
In spring and autumn when the temperature is just right for the growth of rubber trees, it is enough to water every 4 to 5 days, but in summer when the weather is too hot, it should be watered every 1 2 days, and once a week in winter when the air is dry.
Rubber trees like fertilizer, during their growth period, they need to apply 1 or 2 times a month to decompose liquid fertilizer or compound fertilizer, and after each fertilization, they should be watered thoroughly to ensure that the fertilizer penetrates into all parts of the soil.
(1) Change the pot and soil
At the beginning of the growth of the rubber tree, because it grows so luxuriantly, it is necessary to replace the larger pots every year. After 6 to 8 years of growth, it can be repotted every 3 years, and at least half of the old soil can be removed from each repot, and planted with new culture soil.
(2) Spring pruning
In the spring of each year, the rubber tree should be pruned with a major pruning to remove all the branched branches inside the canopy, and remove the fragile branches and weak branches that grow inward, so as to keep the rubber tree in a perfect shape.
(3) Turn the pot
When placing the rubber tree in the sun for maintenance, the pot should be rotated every half a month to avoid causing one side of the rubber tree to grow luxuriantly and the other side to grow very sparsely, which affects its ornamental value.
<> "Lily of the valley should be planted at the right time, preferably in the spring. The seed balls should be divided into small pieces before sowing. It must be disinfected and sterilized before use, and small pits must be dug in the soil before planting. >>>More
1. Planting and common problems of pothos.
Many people like to put potted pothos in their bedrooms, but in the room breeding must pay attention to the area is to put too much in the bedroom, which will make the gas in the house not circulate, and when it is more serious, it will endanger everyone's normal rest and sleep time, in the room in a small amount or can, because the potted pothos can enhance the artistic beauty of everyone's bedroom at a very large level. >>>More
Here are some well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry: >>>More
Here are a few things to keep in mind when it comes to plastic storage tanks: >>>More
Precautions: 1. Choose a suitable aminosugar chondroitin. >>>More