What cleaning agent to use to clean toilet scale

1.If the dirt is not heavy, you can use "toilet cleaner".

Cleaning. 2.If the dirt is heavy, you can use "84 disinfectant."

Cleaning. The usage is: first flush the toilet with water, then sprinkle with "84 disinfectant", brush it with a brush after a while, and flush it again with water.

If it is not clean enough, you can repeat the above work. Remember: never use salt to clean it, because it will damage the glaze of the toilet bowl even if it is clean.

Once the glaze is damaged, it cannot be cleaned in the future.

84 disinfectant.

Toilet Dirt Removal Method:

1. If the dirt is not heavy, it can be cleaned with "toilet cleaner".

2. If the dirt is heavy, it can be cleaned with "84 disinfectant".

The usage is: first flush the toilet with water, then sprinkle with "84 disinfectant", brush it with a brush after a while, and flush it again with water. If it's not clean enough, you can repeat the above operation.

Note: Do not use hydrochloric acid to clean, because although it is clean, it will damage the glaze of the toilet. Once the glaze is damaged, it cannot be cleaned in the future.

3. Pay attention to cleaning the toilet: do not use tools with high hardness such as shovels and steel wool balls, which will also damage the glaze of the toilet.

4. The bucket should be cleaned frequently, and a good hygiene habit of flushing after using the toilet should be developed.

Summary. The scale in the toilet bowl is cleaned with white vinegar and soda, which can remove scale and kill virus.

The scale in the toilet bowl is cleaned with white vinegar and soda, which can remove scale and kill virus.

Take an appropriate amount of white vinegar and baking soda, stir well, pour it into the toilet, and after 15 minutes, use a brush to scrub it, and then rinse it with clean water. In addition, we can put white vinegar in the bottle, make a few holes in the bottom of the bottle, and put it in the water tank. This means that every time the socks are flushed, the white vinegar will also flow out, which can not only remove the dirt but also disinfect it.

Summary. Hello dear! Clean the limescale in the toilet bowl with white vinegar and soda. Take an appropriate amount of white vinegar and baking soda, stir well, pour it into the toilet, scrub it with a brush after 15 minutes, and then flush it with clean water.

Hello dear! The scale in the toilet bowl is washed with white vinegar and soda. Take an appropriate amount of white vinegar and baking soda, stir it well, pour it into the toilet, and after 15 minutes, use a brush to scrub Lu Hui, and then rinse it with water to solve the combustion.

In addition, let the big put the white vinegar in the bottle to imitate the slippery annihilation, open a few holes in the bottom of the bottle, and put it in the water tank. In this way, the white vinegar will also flow out every time the flush is ready to be flushed, which can not only remove the scale but also disinfect.

Limescale in the toilet bowl is also easier to clean with coke. Pour the cola into the toilet bowl and soak it for about an hour before brushing.

We know that the frequency of use of the toilet is relatively high, and it will be very dirty after being used for a long time, so you should use some detergent to clean the toilet, and the detergent should be used correctly when cleaning, so that you can achieve the effect you want during the cleaning process. Let's introduce to you how to use toilet bowl cleaner.

1. The inner edge of the water outlet is the easiest place to hide dirt, you can use a spray gun cleaner to spray it in that place, it is better to use a unique duck bill head, which can penetrate deep into the inner edge of the toilet. If you tend to ignore the outer base, you can also scrub it with a detergent, then wash it with water and dry it with a cloth to give it a look like new.

2. Blue-green bubble This is a solid cleaner, which can be used in all kinds of toilets, and it is also a highly concentrated toilet flushing treasure. As long as you put it directly under the float in the tank, it will not contaminate your hands when you put it in, and if you tear off the film when you don't want to use it, it will dissolve automatically. After each flush, it can achieve the effect of sterilization and odor removal, and it has a floral fragrance, giving people a fresh feeling, and it is also a relatively durable one, and a piece can be used for about a month.

3. The detergent product includes a water-soluble membrane, which is directly put into the water tank when used, and it will be dissolved when it sees water, it can be said that its use method is also very simple, as long as the lid of the water tank is opened, take out the detergent, and put it from the side of the float, remember to be far away from the water inlet, so that it can be used for a longer time, when you find that it is blue when pumping, then put it into a piece according to the previous method.

Summary: The relevant content on how to use toilet bowl cleaner is introduced here, you can use the above methods, it can be said that they have different effects, but the method must be correct in the process of use, so as to avoid some unnecessary trouble. If you want to know more about related knowledge, you can consult Qijia.com.

The toilet bowl is often used, it is very easy to get dirty, and the toilet bowl cleaner must be applied at this time, so what are the toilet bowl cleaners? How to use toilet bowl cleaner blue bubbles? We've got you covered.

1. Toilet cleaner.

The cleaner used to wash the toilet bowl is called toilet cleaner, which can quickly remove dirt, disinfect and sterilize. Toilet cleaner is easy to apply, just spray the toilet bowl with toilet cleaner and clean it after a few minutes. Or immediately put the solid toilet cleaner into the stove water tank, and every time you draw water, you can have the actual effect of cleaning the toilet.

Toilet cleaners are available in both solid and liquid forms. In general, liquid toilet cleaner cans can be sprayed directly on the inside of the toilet bowl and other areas that avoid the drain, so the amount of use and the spraying position can be well controlled.

2. Toilet cleaner.

It can reasonably and conveniently solve the odor and odor of the toilet and clean the air. It has excellent elimination effect on bacterial propagules, spores, viral infections, tuberculosis bacteria and bacteria, and has excellent descaling and cleaning effect on the surface of porcelain daily utensils, such as urinals, floor tiles and cisterns, especially urine scale and urine scale.

How to use toilet bowl cleaner blue bubbles?

1. Take out the detergent blue bubbles you bought from the box, pay attention to the following picture, be sure not to tear off the original film on the surface, this protective film can maintain our hands from being colored, and it will melt when it touches water, so this layer of plastic film does not need to be torn off at all.

2. Put the detergent blue bubbles we are going to prepare into the outer lid of the toilet tank. It is the outer cover to which the toilet flush button belongs, which is called the toilet tank.

3. After we open the lid of the toilet tank, put the prepared detergent blue bubbles into the water tank, here I would like to remind you that we should put the detergent blue bubbles into the place where the water inlet and outlet pipe avoid the entrance and exit of the water tank, and must not be close to the water inlet and water inlet pipe of the water tank to avoid causing blockage.

4. After the detergent blue bubbles are put into the water tank, you can see that the blue water-soluble film has dissolved, and it gradually turns dark blue in the water tank. Cover the toilet lid and let the blue bubbles melt completely in the water tank, and after 10 minutes, you can see that all the water pumped out has turned dark blue.

5. Blue bubbles can not only clean the toilet basin, it can also clean the water tank, but also reasonably prevent the water tank from dirting, so that the water tank to the side basin are particularly tidy, and easily deal with the troubles of cleaning the toilet.

It can be seen from this argument that there are many toilet cleaners on the market at present, each with its own characteristics, such as toilet cleaners are solid and liquid. In general, liquid toilet cleaner cans can be sprayed directly on the inside of the toilet bowl and other areas that avoid the drain, so the amount of use and the spraying position can be well controlled.

Toilet cleaning is very important, especially toilets, which are cleaned thoroughly. Next, PCHOUSE will talk to you about how to use toilet bowl cleaner.

1. Since the outlet at the inner edge of the toilet is a place where it is easier to hide dirt and dirt, the general spray gun toilet toilet cleaner cannot spray the detergent there, so you can use the detergent with a unique duckbill head design to penetrate deep into the inner edge of the toilet bowl and remove the stubborn dirt. For the outer base of the toilet bowl, which is easy for ordinary people to ignore, it should also be brushed with detergent, washed with water, and then wiped dry with a clean cloth, and it can be as white as new.

2. Blue-green bubble series products are a solid automatic cleaner, which is a daily consumer product, which can be used by every family that uses a toilet, and is a highly concentrated solid toilet cleaning and toilet cleaning treasure. Directly put under the float of the water tank of the toilet, there is a layer of anti-pollution environmentally friendly water-soluble plastic film on the surface, which will not pollute your hands, and it will automatically dissolve in the water tank without tearing off the film. Every time you flush the toilet, you can achieve the effect of cleaning, sterilization and odor removal, and it is accompanied by a faint floral fragrance, giving people a fresh and clean feeling, and each piece can be used for more than a month.

3. The toilet bowl cleaner product is packed with a water-soluble membrane, which can be directly put into the water tank and dissolved when the water is seen; The method of use is also very simple, lift the lid of the water tank, take out the toilet cleaner, and put it from the place close to the float, which must be away from the water inlet, so as to prolong the use time; When pumping, you find that the blue color gradually disappears, please put another piece according to the previous method.

The above is an introduction to the use of toilet bowl cleaner, and the correct use of toilet bowl cleaner can make cleaning easier and more efficient. I hope you find the above helpful.

1 Detergent powder. It's cheap and sold in supermarkets.

2 With white vinegar: Mix it with water in a ratio of 1 to 5 and it can be easily removed.

3 You can pour leftover cola into it and flush it after an hour. (I haven't tried this myself, I listened to what others said).

The porcelain pools, bathtubs, and MTs at home have been used for a long time, and it is inevitable that rust spots and scale will be left behind, and it is really not easy to remove them. There are a few common methods you can try:

1. To deal with rust spots, mix salt and vinegar together, stir, dilute the salt in vinegar, heat, dip the liquid with an absorbent sponge or rag, put it on the rust spots, and cover it for more than 20 minutes. Then use a coarse cloth dipped in a salt and vinegar mixture and scrub vigorously to remove.

2. To deal with the scale in the bathtub, use white vinegar: mix it with water in a ratio of 1 to 5, and you can easily remove the scale. The scale in the faucet and other places is more stubborn, you can remove it and soak it in white vinegar for 20 minutes, and the scale will disappear.

3. For the limescale in the MT, you can pour the leftover cola into it, and flush it after an hour.

4. Stains and limescale on the bathroom glass door can be easily removed with a small glass of white wine.

Detergent powder. It's cheap and sold in supermarkets.