The toilet is often not flushed after use, how to solve it?

<> The glaze of the toilet bowl is an important part of the toilet, if the glaze of the toilet bowl is not good, it will have a great impact on the cleaning of the toilet, which will cause stains to remain on the toilet bowl and not flush cleanly.

A good glaze must be smooth, grain-free to the touch, and shiny. Just like Deshiton's smart toilet, it uses nano self-cleaning glaze, the glaze surface is not stained, it is not easy to absorb water, and it is easy to clean.

First check whether there is a problem with the toilet, generally speaking, as long as the toilet has a water tank, it will not be flushed, if there is a problem with the toilet, you can change the toilet. Secondly, a booster pump can be installed, and finally FAENZA's smart toilet can be replaced.

You can soak it in a good toilet cleaner or put the blue round toilet cleaning cake bought in the supermarket and put it in the water tank, which has the effect of repairing the glaze slippage, and the dirt is not easy to stick too tightly.

This small suggestion, in fact, installing a toilet is a kind of technical work, even if the worker is skilled, it is not as good as installing it yourself. When you buy a product, you can also let the merchant package install it, so that you can save the installation fee. It should be noted that if you want to lay the floor tiles and then install the toilet, this is the correct installation sequence.

1. If there has been a similar situation, it is a product quality problem and the glaze material is not good, so let the merchant come to deal with it. 2. In the past, it could be cleaned, but now if it can't be cleaned, clean it frequently, and don't use too corrosive washing liquid, which will damage the ceramic glaze and make it easier to hang dirt in the future.

Aging: After using it for a long time, because of the aging of the toilet, there is a lot of hard dirt in the passage below, which is inconvenient to go into the water and easy to block the water.

The poor pumping capacity of the toilet is a toilet problem, and the solution can only be to flush with more water.

Take a large basin of water to flush first, try it, if the effect is good, it means that the flush is not enough, and the water tank should be adjusted. If the effect is not good, it means that the toilet bowl is blocked, and the idea is to unclog it.

1. Adjust the water level of the water tank appropriately, because the toilet is always not flushed, and it is likely that the sewer pipe is slightly blocked, dredge it. However, if the flow from the water tank to the toilet bowl is slow, check whether there is any foreign object blocked from the toilet tank to the flush outlet; 2. Increase water consumption, for example: put plastic bottles in the water tank; 3. Adjust the screw of the water inlet valve in a clockwise direction to make the water level higher.

You can use a toilet brush to clean the toilet after use, because the main function of the toilet brush is to remove stains.

You can flush the water several times, this situation is usually a slight blockage of the toilet, if the blockage is serious, you can ask a professional master for help, if it is because of clogged hair, you can use a wire to hook the hair out.

It shows that the toilet flush is not strong, and the most thorough solution is to replace it with a new toilet, but the cost is a bit high. It can also be used in combination with a toilet brush after each toilet. At the same time, it is also necessary to consider whether it is due to physical reasons, such as stool that is easy to get on the toilet, or it may be that the body is too damp.

The toilet bowl is always not flushed after a long time because the water flow force has become smaller, which can be solved by adjusting the size of the water flow force, and the specific operation method is as follows:

1. First remove the cover on the toilet tank.

2. Find the inlet valve in the toilet tank below.

4. Lift the switch on the inlet valve of the toilet tank below.

5. Finally, cover the lid of the toilet tank, so that the problem of unclean toilet filling can be solved.

The toilet bowl is generally divided into the following situations: 1. Slight blockage of the toilet: it is generally caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

Toilet toilet 2. Toilet blockage: When using, you accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

You can remove the sewer pipe, put it in the acidic substance, remove the accumulated dirt, and then install it, and the water will be much faster. If there is a soft object blocked, you can use a soft spiral pass, or kick it with a toilet, if it is a hard object, it is best to find a professional company to solve it.

You can increase the amount of water, such as putting bottles in the tank. Adjust the screw of the inlet valve clockwise to raise the water level, taking care that the water is at least 10mm away from the overflow nozzle of the drain valve. Adjust the water level of the tank appropriately.

If it is a slow flow from the water tank to the toilet, check whether there is something blocked from the toilet tank to the flushing outlet.

<> "What should I do if the toilet can't be flushed at one time?"

The solution to the toilet sloppy.

Generally, there are three main possibilities for the toilet to be flushed at one time. The first possibility is that the toilet manufacturer's design is unreasonable, the reason for missing the inspection or the water replenishment pipe is not plugged in, resulting in the water seal area of the toilet becoming smaller, and the poop will stick to the glazed surface of the toilet bowl and hang dirt. Generally, the water seal area of a qualified toilet will be greater than 10*.

If it is below this size, it can only be changed by increasing the amount of water stored in the toilet tank.

The second situation is when the toilet flushes weakly or does not form a siphon to flush away the dirt. In such a situation, we can only recommend that you take the method of increasing the flush volume or raising the water level. If you want to increase the amount of flush volume, then you need to prepare a straw.

Then, connect this straw to the two ends of the toilet water unit, which are the inlet valve and the small hole on the rightmost plastic column. If you want to raise the water level, you can use a screwdriver to turn the screws on the top of the Arrival Silver Water Valve Float Bucket clockwise a few times to raise the water level.

The third situation may be that you need to press and hold to flush the toilet bowl to flush it. Many of these possibilities are the result of the large gap between the button rod and the top of the water piece due to the fact that the things under the pad of your toilet tank are not torn off. To solve this problem, we just need to tear off all the mats on the toilet tank.

In addition, we can also screw the stem of the toilet button to the head. This is to prevent the toilet from slipping after a long time, which will cause the gap at the top of the button rod to become larger and affect the punch. Solve the above 3 possibilities, and you no longer have to worry about the toilet being dirty.