-
It is estimated that many people are like this with my toilet, because of various reasons, such as frequent water outages, etc., which will cause the scale in the toilet to accumulate thicker and thicker, and I don't know how to deal with it, the thickness is estimated to be 1 cm, the drain hole is very small, and it is blocked every day, so I can only find a way to solve it, otherwise it will not work.
First of all, don't blindly listen to some methods on the Internet, it is estimated that there is business hype in it.
I just listened to what thick dirt must use oxalic acid.
Hydrochloric acid and the like can be removed, so I bought two catties of oxalic acid from the Internet, a catty of a bottle, and melted in warm water (cold water does not melt), which has no effect at all, but makes the surface calcification hard. I used more than one bottle, and I didn't dare to use the remaining half bottle.
So I guess that these people who say on the Internet that they use oxalic acid to remove toilet dirt are likely to be manufacturers and merchants who sell oxalic acid. Or, it works theoretically, but the actual operation is difficult, and we are not chemical experts, so we can't prepare the best solution.
In the end, I found that I can use the ordinary toilet cleaner sold in the supermarket to remove the scale, which is specially formulated to remove the scale, and the effect is definitely better than the acid that I prepared by hand, I use the toilet cleaner to remove the scale one centimeter thick.
The steps are as follows: 1. Before going to bed at night, flush the toilet several times, flush it clean, and then use a large syringe for injection, a large one, sold in pharmacies, about 1 yuan a, to suck up the water in the toilet, of course, you can use other equipment, as long as the water accumulated at the bottom of the toilet is sucked dry;
2. After blotting, put the toilet paper.
Stuff it into the toilet, press it a few times, suck out the water in the thick dirt, the toilet paper is soaked, and then replace the dry one and continue to suck until the toilet paper is no longer wet; If you don't have time, stuff more paper and go over to see it after a while;
3. The above two steps are to suck out the water in the scale, so that the toilet cleaner can fully penetrate into the inside to achieve the best and fastest descaling effect. I wear the rubber gloves I usually use for work.
4. Then, the toilet cleaner bought in the supermarket can be used in any brand, the difference is that some are a little stronger, some are a little thinner, and some are different in color, it doesn't matter. Find a container that you don't use, such as a water cup or something, pour out the toilet cleaner, mix it with water, the ratio of water and toilet cleaner: 1 is OK, and you can pour it directly without mixing water if you are not bad for money.
Until the toilet cleaner submerges the top edge of the limescale, it is estimated that it will flow down. The dosage is about half a bottle to one bottle of toilet cleaner.
5. Then, go to bed, rinse again the next morning, if you want to make full use of the toilet cleaner, then wait until noon or night to flush again, let the toilet cleaner slowly melt there. When flushing, you will find that the water is no longer as clear as the toilet cleaner, it is muddy, and there is a lot of powder at the bottom, so flush it several times. The scale in my house is too thick, so it will definitely not melt all at once, but the scale has been melted, and the surface is already very loose, so you can use it for a few days to rinse the soft scale on the surface, and then continue to operate from step 1.
Generally passed. Two or three times, the scale is basically melted clean, even if it is not clean, it will be operated once to reduce one layer, and a few more operations can be done.
-
If it's not very thick, a cheap bag of vinegar will do. If it's a lot, the supermarket has toilet cleaners.
-
You can use: oxalic acid, dilute hydrochloric acid sprayed on the rust part for a period of time and then brushed to brush off.
-
You add toilet cleaner and these should be able to be brushed off. There's nothing you can't brush off. Only have you said that it really can't be good? You hire a part-time worker to clean your house and make sure it gets you well.
-
The scale inside the toilet bowl is not easy to remove, it is recommended that you buy a special remover for toilet dirt online, which can be easily removed.
-
The rust in the toilet bowl cannot be brushed off, and the rust can be removed with oxalic acid
-
Oxalic acid can be bought to remove, this taste is more pungent, but the effect is very good.
-
Hello. The detailed steps to clean up rust on the toilet bowl are as follows:
1. Toilet cleaner.
Cleaning method: Soak the toilet bowl with water first, then drip the toilet bowl cleaner evenly from the upper edge of the toilet bowl, soak for about 10 minutes, then scrub with a brush, and then rinse with water.
2. Vinegar. Cleaning method: Mix vinegar and water in a 10:1 ratio and pour into the toilet. Soak for 3-5 hours, and then drop the soil with one brush. After flushing the toilet, spray white vinegar on the inside of the toilet bowl and flush the toilet together next time to disinfect and deodorize.
3. Baking soda.
How to clean: Sprinkle an appropriate amount of baking soda in the toilet, soak it in hot water for half an hour, and then use the toilet brush to remove the dirt.
4. Shampoo cleaning method: If you are worried about the safety hazards of toilet bowl cleaner.
You can wash the toilet bowl with shampoo. In this way, children can sit on the toilet without feeling the smell.
5. Coke method: Coke contains a kind of citric acid.
Poured down the toilet. After soaking for about an hour, the dirt can be removed by brushing the toilet.
6. Detergent cleaning method: first put an appropriate amount of water into the toilet, rinse it with the toilet, then pour in 5-10 ml of detergent, apply it evenly with a brush, and then rinse it to achieve the cleaning effect.
-
There are several ways to remove limescale from the toilet bowl
Toilet cleaner, the most commonly used in the average family is definitely toilet cleaner. Simply put a little toilet cleaner on the brush and use the brush to remove the dirt from the toilet.
2. Vinegar. Vinegar is also an acidic substance, which can also remove dirt from the toilet bowl and is not very harmful to people. You only need to rinse with vinegar and brush off the dirt, and you can remove the dirt well.
3. Baking soda.
You can sprinkle the powder soda on the dirt in the toilet, let it sit for a while, and then brush it again, which will quickly remove the dirt from the original toilet.
4. Coke, pour Coke with Coke to remove toilet dirt, it is best to spare gloves in advance. When you pour the cola into the toilet, the acid in the cola will slowly break down the stain. After pouring, let the cola soak in the toilet bowl for a period of time (1 hour) or overnight, rinsing with plenty of water until the toilet bowl is clean.
-
The mouth of the water in the toilet bowl is rusty, in fact, this is urine scale, you can go to the Internet to buy a special cleaning agent for toilet urine scale can be easily cleaned, right.
-
There is rust in the toilet bowl, that is, the scale can be used to brush the toilet cleaner, and then use the brush to repeatedly brush the scale of the place can be removed, you can also use white vinegar and baking soda to mix water with the toilet brush can also effectively remove the scale, and you can also add the toilet cleaner to the tank to remove the scale, so that the air is fresher and the toilet bowl is cleaner.
-
The hemp leg inside the water place, the excellent first can be replaced, and the second can be in and out of the show.
-
Wash with acid or wash with toilet cleaner.
-
If you want to get rid of the smell of the toilet, you can look at the toilet directly, he has that toilet cleaner, you go directly to buy one and buy one online, and then go to clean it up The effect is better.
-
The rust produced in the toilet bowl is uric acid, which can be used to clean the toilet and be effective with one drop.
-
Rust in the toilet is a common problem, usually due to problems with plumbing or stuffy water quality. If the search is not dealt with in time, it will affect the hygiene and use experience. Here are some workarounds:
1.Clean the toilet tank: The tank can be cleaned with a detergent such as vinegar or bleach. Drain the water tank first, then pour the detergent into the water tank, let the cleaning solution soak for a period of time, and then rinse it off.
2.Replace the water pipes: If the water pipes are rusted due to water rust, you can consider replacing the water pipes. Choose the best water pipes with excellent materials to ensure a long service life.
3.Regularly check the water quality: The formation of rust is related to the water quality, and regular inspection of the water quality can detect the problem of rust in time. If the water quality is not good, you can buy a water purifier to purify the water.
4.Maintain hygiene: In addition to cleaning the water tank regularly, it is also necessary to pay attention to maintaining hygiene and avoid debris and garbage falling into the toilet, so as not to cause pollution and breeding bacteria, which will affect the water quality.
In short, if there is rust in the toilet, it is necessary to find the cause in time and take effective solutions to ensure physical health and comfort of daily use.
-
Generally, when removing rust from the toilet, the family will use toilet cleaner, only need to put a little toilet cleaner on the brush, and then brush the stains on the toilet bowl, which can be removed quickly. If the rust in the hall is more serious, you can pour the toilet cleaner into it, and then soak it for about half an hour, and the effect will be more obvious.
01 You can use vinegar, which is a high-wax acidic substance, which is not harmful to the human body, and can also effectively remove the dirt on the toilet. You only need to pour vinegar into it, and then use a brush to remove the dirt immediately, and the effect is obvious.
02 Baking soda can also effectively remove stains, pour baking soda directly on the stain, then let it stand for a period of time, and then scrub it with a brush, you can effectively remove the dirt on the surface and restore it to its original whiteness.
03 You can pour Coke into the toilet, and then use Coke to remove the stains, it is recommended to use gloves in advance, after pouring the Coke into it, the acid in the Coke will gradually decompose the stains, after pouring, let the Coke soak in the toilet for a period of time, soak it for one night as much as possible, and then rinse it with water.
04 There are also some people who may directly use decontamination powder, which will contain chemicals, and only need to pour it into the toilet, and then brush it vigorously to effectively remove the rust in the toilet, which is also a common operation at present.
-
If the water on the toilet bowl is rusty, it will not only affect the use, but also bring adverse health effects to the person, so it needs to be dealt with promptly. Here are some commonly used methods:
1.Using vinegar and soda: drain the water first, then pour in a cup of vinegar and a cup of baking soda and wait fifteen minutes. Use a brush to clean the toilet bowl and rinse the socks to remove the rust.
2.Use alumina: Use some alumina powder to apply to the rust-affected area before the water cleans up and wait for a while. Then wipe these areas with a brush or rag, rinse them off and rinse them with water.
3.Use lemon juice and salt: Mix the lemon juice and salt and apply it to the rust-affected area of the toilet bowl and wait half an hour. Then use a brush to clean for a few minutes and rinse well.
4.Use a professional cleaner: This method requires purchasing a toilet bowl cleaner from the market to clean the toilet. Follow the instructions for use to remove rust.
To sum up, the above methods can effectively remove rust from the toilet, we can choose the appropriate method according to the actual situation, do not ignore the importance of cleaning the toilet.
Such a towel must not be used, it has been contaminated, there are a lot of harmful germs in the toilet, so it can only be discarded, so as not to harm your health, and secondly, you must first find a way to get the towel out, so as not to cause blockage, in case you can't get it out, you can ask a professional dredging master to clean it up, but it is recommended to discard the towel after it comes out.
Don't turn it on, the problem of maintenance depends on what brand your mobile phone is, if it is an international brand, they are generally responsible for repairing, and the charge is relatively fair (because this is a human reason), but the follow-up responsibility brought by the maintenance customer service will not be born, and your mobile phone free warranty right will be lost. However, if you shut down quickly, the internal parts are not burned out, you can still repair it, a Nokia mobile phone of my friend just bought it a few days ago and fell into the soup basin during a meal, and it was repaired by sending it to customer service, roughly wiped with some organic solvents
Before cleaning the toilet, ventilate the room. Open all the windows in the room and remove everything that is placed on the toilet tank. >>>More
1. Clip it out with a clip.
If a towel falls into the toilet pit, see if there are any clips or other tools in the house. If not, use two sticks instead. >>>More
If you fall into something soft like a towel, you can use a wire to stir it in the toilet drain to hook it up. In addition, it is inevitable that some soft things such as toilet paper will be dropped into the toilet, and you can directly use the leather pinch to pump a few times at the mouth of the squatting toilet, and the effect is very good. If it is a plastic brush, bottle cap, soap, comb and other hard objects that fall in, then you need to use a pipe dredging machine, and in serious cases, you even have to disassemble and dredge the toilet, which can only be completely solved by getting things out.