Is the radiator installed before or after the renovation? Renovation or radiator first?

When doing interior decoration, the order in which radiators are installed is an issue to consider. In general, the installation of radiators should be carried out before renovation. This is because the installation of radiators requires pipe laying, and if it is installed after renovation, it may destroy the finished renovation effect and increase the renovation cost.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

In the local market, the range of radiators is larger, mainly depending on the material, brand and model of the radiator. Generally speaking, the ** of aluminum radiators is between 200-500 yuan per piece, the ** of cast iron radiators is between 300-800 yuan per piece, and the ** of steel radiators is between 100-300 yuan per piece. These ** are for reference only, and the specific ** also needs to be inquired according to the actual situation.

When choosing a radiator, in addition to the best factors, you also need to consider the performance and service life of the radiator. Aluminum radiators have good heat dissipation performance and long service life, but ** higher; Cast iron radiators** are moderate, with long service life, but poor heat dissipation performance; Steel radiators** are inexpensive, but have a short service life and average heat dissipation performance.

Therefore, it is recommended to install radiators before renovation to avoid ruining the decoration effect due to the installation of radiators after renovation. When choosing a radiator, you should choose the right material and model according to your budget and needs. If you have a good budget, you can choose aluminum radiators with excellent performance and long service life; If you have a limited budget, you can choose a cast iron radiator with a moderate and long service life; If you're on a tight budget, opt for inexpensive steel radiators.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

Usually, many consumers choose radiators when winter comes.

I installed it, but I was too short on time, and I regretted why I didn't install it earlier. So, how to grasp the timing of radiator installation? When is the right time to install radiators? Let's follow the golden flagship flag brother to find out.

It is better to install heating during the non-heating period, i.e. from March to October. However, due to the difference between the old and the new, renovated and unrenovated houses, there is a difference in the installation time. Let's analyze it:

1.New house that is not renovated.

At present, most of the new houses are rough houses when they are delivered.

Renovation is required to live in. In this case, the owner only needs to install the radiators before the heating starts. Heating installation is a systematic project, and most of the pipes will be buried, so the pipeline installation and heating location determination are generally carried out before the installation of water and electricity.

The owner needs to go to the construction site.

and the designer to establish the direction of the pipeline, the installation position of the radiator, and then according to the plan of installation and construction.

At this time, it should be noted that most of the radiators are customized products, and there is a certain period of production and delivery cycle. In order not to affect the progress of the project.

The owner should grasp the purchase time and try to choose radiators, pipes and fittings and other materials in advance, so as to have enough preparation time and deal with problems in time.

2.Renovated house.

If you want to install or replace the radiator after the house has been renovated or the heating has been used for many years, you need to install it as soon as possible before the heating is tested. The owner can ask the manufacturer to provide door-to-door measurement and design scheme services, according to the measurement results and decoration style.

and so on to customize your favorite radiator style and color. If the heating needs to be moved, or there are radiators in the bathroom and kitchen that go through the hidden pipes, you need to groove and change the pipes in advance to do waterproofing and bricklaying work.

At this time, it should be noted that there may be water or stains polluting the ground or wall during the installation process, so it is recommended to lay the floor and treat the wall first. In order to prevent the valve from being stuck with cement during the renovation, the valve is wrapped with cloth for two months after the pipe change is completed.

From the above analysis, it can be seen that the installation of radiators also needs to be timed, otherwise it will affect the construction period, or deface the home decoration, and even affect the normal home life. Therefore, we need to follow the correct timing of radiator installation and don't play with personality!

In my experience with home renovation. Generally, when doing basic engineering, the pipeline will be reserved first. When the time comes, look at the installation and measure the ruler.

It's best not to pretend yet. Because in the later stage, the wall surface was still removed. These are not problems, and the person who decorates will give you advice.

Radiators are generally installed when doing water and electricity.

Hello, radiator installation is best installed in March to November every year, during the heating shutdown period. This is also the best time to renovate the house. At this time, the installation of radiators can be completed simultaneously with the decoration of the house, which will save a lot of costs and reduce a lot of trouble.

In addition, the radiator should be installed after all the procedures on the wall have been processed, that is, the wall paint is painted, the wallpaper is pasted, the bathroom and kitchen tiles are pasted, and the wooden floor is not paved. This will not affect the painting of the walls and will not cause damage to the floor.

The best time to install surface-mounted radiators.

Surface-mounted radiator is an installation technology that puts the water supply pipe and return pipe of heating water on the wall, because there is no need to slot, landfill, so it avoids damage to the decoration during the installation of home improvement radiator. Therefore, the best time to install surface-mounted radiators for home improvement is after the renovation and occupancy. If you have just renovated and have not purchased a heating system, it is very suitable to contact the HVAC company to install surface-mounted radiators.

The best time to install concealed radiators.

Concealed radiators require the water supply pipe and return pipe to be buried in the ground, wall, ceiling, and ceiling, which is a concealed project. Slotting and drilling are required. Generally speaking, the installation progress of concealed radiators is divided into two steps: pipe laying and hanging installation, and the best pipeline laying time of concealed radiators is before changing water and electricity, so as to avoid the impact on the progress of subsequent decoration construction.

The best hanging construction of concealed radiators should be carried out after the overall decoration of the whole house is completed. Generally speaking, the debugging is carried out immediately after the installation of the concealed radiator is completed, but if it is not the heating season after the construction is completed, the HVAC company should be asked to come to the door for debugging before the heating season begins.

The installation of radiators is simple and fast, the installation process does not destroy the decoration and the heating effect is good, and the later maintenance is convenient, so that more and more people are thinking about preparing for winter heating. In order for everyone to enjoy the warmth brought by the radiator faster and better, it is also safer and more comfortable to use the heater. So, at what stage of renovation is the radiator installed?

Let's follow the golden flagship flag brother to find out.

Recommended installation time for radiators for new house decoration:

After the decoration design is done, the structural wall is built, the demolition is demolished, the bricking is done, that is, the main body of the interior is done, the heating company should be handed over to the decoration company and the owner on the spot, and the final radiator installation position, the location of the manifold, the location of the wall-hung boiler, and the power socket should be left there.

After the handover, the radiator pipe should enter the site, and the installation time of the heating pipe is more than that of water and electricity.

1. The staff is required to see the house on site, and the plan cannot be made based on a single floor plan. There is a difference between the radiators of a renovated house and the radiators of an unrenovated house. There should be detailed communication on the spot, and reasonable suggestions should be put forward at the same time.

2. For the bathroom heating, it is best for the owner to provide a detailed water and electricity layout. Because it involves the wiring duct line pipe, there is no drawing, and I don't know where the water pipe wire is, so it is necessary to contact the decoration company or project manager to avoid damaging the hidden works of the bathroom.

3. After inspecting the house structure on site, you can design the HVAC scheme according to the needs. However, it should be noted that the surface-mounted radiator pipe is an open pipe, and the heat loss is greater than that of the dark pipe, so it should be larger than the dark pipe when distributing heat! Otherwise, it won't heat up.

4. It's time to enter the market, safety is the most important! This requires the construction workers to have good quality and the company's strict management, after installation, teach consumers to use and debug the boiler daily, and inform the maintenance and other precautions.

5. Because it is a well-decorated house, it is necessary to pay attention to protecting the decoration of the owner's home during construction, and it is best to carry out the construction on the basis of not destroying the decoration. At the same time, it is necessary to discuss before construction, and cover furniture and household appliances and other items with plastic sheets. Therefore, before installing heating, it is necessary to go to the service site of the HVAC service provider to see if the construction protection of the construction site is in place.

6. Although the surface-mounted radiator is convenient for later maintenance and repair, the difficulty of construction has increased due to many constraints in the installation. Therefore, we must pay attention to the process of pressure test and pressure holding, perfect pressure holding data is the best proof to eliminate the hidden danger of water leakage, in order not to destroy the existing decoration, it is inevitable to make holes in the wall when installing heating pipes, so it is necessary to pay attention to reminding the construction personnel to protect the details of the wall.

7. Try to choose the radiator installation under the window or by the door and other areas with strong air convection, which is conducive to ensuring the effect of indoor heating.

1. When will the heating be installed:

The installation time of heating equipment is before or after several types of heating, and March to October of the year is the appropriate time to install. Because the pipes of home heating are Heng Zheng in the early stage of decoration must lay pipelines, so in the early stage of decoration to plan the number and location of indoor radiators in advance, the need for professional heating engineering designers combined with the actual situation of the owner's home, overall planning of the installation location and number of radiators. After the radiator is installed, it is necessary to inject water and suppress it, observe whether there is water leakage, no heat and other phenomena, and keep the original radiator pipeline drawing and shooting, which is convenient for future maintenance.

Second, the installation process.

Step 1: (Laying the pipeline) according to the pre-designed installation position to determine the line of the pipeline, the pipeline line is generally in the ceiling, baseboard and other hidden places, the laying of the open pipe try not to affect the indoor decoration or occupy too much space.

Step 2: (Install the radiator) In the process of installing the radiator, the radiator should be placed smoothly, and the level should be used to measure to see whether the installation is stable, and then the valve connector and the inlet and outlet valves are connected, and after the inspection is correct, it should be reinforced with a pipe wrench.

Step 3: (Install the wall-hung boiler) The installation of the wall-hung boiler needs to be separated from the open wire and electrical equipment, and flammable and explosive materials can not be placed around it, specifically, the distance between the wall-hung boiler and the gas meter and the gas stove should be more than 30cm.

Step 4: (pressure test and acceptance) The construction personnel did not run, run, leak, drip, etc. when the pipeline was stamped and tested, and the acceptance can be carried out after inspection and confirmation by the customer.

In the case of water circuit retrofits.

After confirming the installation position of the radiator in advance, the wiring line needs to be designed for the wiring line, and the wiring line is generally in the ceiling, baseboard and other hidden places, and the laying of the open pipe knows that the ant annihilation should not affect the indoor decoration or take up too much space. The water inlet and outlet of the pipeline must match the location of the radiator.

Make sure that it is a radiator, not a heating pipeline, if it is a radiator, wait for the interior decoration of the powder floor to be completed, and then install it.

Installing a set of radiators in an already renovated house is a nine-step process. There are strict standards for every step of the way. Let's follow the golden flagship flag brother to find out.

On-site disclosure: At the installation site, the construction personnel will pave the plastic film to do a good job of on-site protection.

Mark the location of the hole: The on-site construction personnel will help the owner dismantle the ceiling and observe the best opening position.

Drilling: It is inevitable that there will be mud water when making holes, but professional construction will achieve good protection.

Installation of the main unit and thermostat: According to the actual situation, install the main unit and thermostat in a suitable position.

Heatsink installation: Installing a heatsink in the room is also the terminal of the whole system.

Water pipe laying: Water pipe laying is a very important step in the whole system.

Connecting the system: After the system is connected, the installation process is completed, and then the commissioning is done.

Commissioning: Workers will exhaust the air in the radiator and start to use and effect adjustment.

Completion sign: After the construction is completed, it will also help the owner restore the furniture and kitchen and bathroom ceilings.

Is there anything special about the distribution of pipes with radiators?

The installation of radiators involves the distribution of pipes, and if the design is not good, the home will be full of exposed pipes, which requires the designer to make a plan according to the situation. Generally speaking, the positioning, size and direction of the heating equipment and the direction of the pipeline should be as concealed and reasonable as possible, and the pipeline system should be arranged as far as possible in the position of the corner line and the baseboard, the more concealed the better, and at the same time take into account the original decoration.

Where is the right place to install surface-mounted radiators?

The radiator installation adopts the principle of window priority, the radiator is the first place to consider is under the window, in this place one can heat the cold air from the window at any time, the second is that this place is generally not utilized, placed in this place can make good use of space, if the window can not be installed next to the window, behind the door, next to the door and other places, these places are the places that will not be used at home, the radiator is placed in these positions, which not only saves space but also increases the aesthetics of the room. (The specific location designer will choose the appropriate location according to the actual situation of the owner's home).

What is the appropriate temperature for surface-mounted radiator heating?

The room temperature is comfortable at 21 degrees, and if the room temperature is too high, it will be tired and sluggish, and if the room temperature is too low, the body's metabolic function will decline, which will induce diseases. 21 degrees is just right, which is a warm and comfortable temperature that is healthy and environmentally friendly.