How to put a raglan sweater from the bottom to the top of the needle

From the bottom to the top, 70 needles from the foot mouth 10 lines of the next needle, after the full needle, if interested, you can add a twist 6 needles on both sides, add 1 needle on both sides of every 10 lines, the foot mouth to the length of the file is 17 cm, knot two trouser legs, merge, merge and put 16 needles, in each two rows on both sides of the 1 needle, until the release of the 16 needles are all closed.

After all the way up the knot, the file to the sleeve dragon is 18 cm, in the top of the knot raglan 14 cm, raglan knit to about 9 cm, the front piece open the collar, the neckline is flexible to grasp the number of needles, can be subtracted every two rows of 3-3-2-2-1-1-1-1-1-1-1, the total raglan length is 15 cm.

The back piece is the same length as the front piece, the back piece is woven to 13 cm apart from the neckline, the two sides minus the needle is 3-2-1, the next 60 needles knot the sleeve, 10 rows up and down the needle, after the whole knot under the needle, every 8 rows put 2 needles, knit to 17 cm long to begin to close the needle, the needle and the front and back pieces of the raglan shoulder the same, as long as the front and back pieces, after the two sleeves are knitted, use crochet to put the sleeves on the raglan shoulders of the front and back pieces, and then weave the placket and neckline, the placket neckline is woven 10 rows, the weaving 4 rows can be twisted holes, the hole is 4-5 needles, and the buttons are woven with the buttons The hole of the 3-4 needles is directly made with a finished button.

The vertical needle is more harmonious, you can try it, anyway, you can disassemble it and come again. View the original post

Tools: 9 groups of 1 strand of weaving, 1 11-gauge long and 1 short straight needle, and 9-gauge hand ring needle.

1. The body part hits the opening clip, and the head is small. In addition to the two sleeves, 40 cm of thread is left at the opening and 6 stitches are left under the armpit.

2. Raise the two sleeves, the left sleeve and the right sleeve weaving, and reduce the seams on both sides here. (Length: cufflinks.)

to the axilla). <

3. Leave 6 stitches on the lower part of the body and two sleeves, and put it on with thread. After the collar nest is opened, the collar nest is the axis, and the front and back are woven with each other until the nest height is suitable.

4. Then the body and the two sleeves are woven together. The way to reduce the 4 shoulder seam sutures is to subtract 4 seams once, and each shoulder seam is to subtract 2 seams on each side, for a total of 4 seams; (Bichai which shoulder stitch 4 stitches 4 stitches) a total of 16 stitches. After 3 times, only 1 needle is sent per sleeve.

1 Count how many needles there are in your shoulder, divide by 2, and that's how many times you'll have to close the needles.

2 Generally, it is collected once every other row, and the length of these rows is measured according to the number of times it is collected.

3 The length of the cuff (armpit to shoulder), minus the length to be closed, is where the needle begins.

4 specific needle retraction: the beginning of the side of the three needles, normal weaving, from the 4th to 7th needle starting 4 needles and 2 needles, specifically 6 and 4 together, 5 and 7 and so on (this method of combining needles and from the bottom to the top of the raglan sleeve is the same as the needle) Finally, the remaining three or four stitches of the needle and knitting into a stitch

5 The front piece has the same collar as usual, until it is as long as the highest part of the back piece, and then the front and back pieces are closed.

How to divide a raglan sweater from top to bottom is as follows:

1. Prepare wool or cotton thread, as well as rod needles; Starting with 18 stitches, let's do a demonstration of raglan sweater knitting from top to bottom.

2. After the needle is finished, you can knit several rows of needles, or you can start the minute hand directly after knitting a circle. 6 stitches on the front chest and 3 stitches on each shoulder, and 4 needles are used to knit each.

3. The last needle in each rod needle is the shoulder stem. Add one stitch to the left and right for each needle that is knitted to the shoulder stem. I just repeat knitting to the height of the shoulder.

4. Then thread the two sleeves with threads and start knitting the body parts.

5. Knit the body part to the required length and knit the edges of the clothes up and down.

6. Then thread the coil of the sleeve with a rod needle and start knitting the sleeve.

7. After weaving the sleeves, use the same method to weave the other sleeve.

8. Such a simple raglan sweater from top to bottom is knitted.

A raglan sleeve sweater is a very common sweater style in life, but it is a little complicated when knitting sleeves, in fact, as long as all the steps are coherent when knitting a sweater, the sleeves can be knitted naturally.

First, the 96-pin lock pin (the number of pins needs to be a multiple of 4), and the end of the pin is pulled. Row 1: The first needle is hooked 3 and the lock is 1 long, and then (the hook is 22 long without adding or subtracting, the next 1 needle is hooked 2 long and 2 locked, and the next 1 needle is hooked 2 long).

Repeat the hook method in parentheses and hook 3 sets (after the last group of hooks has completed 22 stitches, hook 2 long and 2 locks in the last 1 stitch, and then pull out with the standing pin, a total of 4 sets, each group of 24 stitches).

The second circle: the first needle hook 3 locks 1 long, (do not add or subtract the hook 24 needles long needle, and then hook 2 long 2 locks on the next 1 needle, and then hook 2 long on the next 1 needle "that is: hook 2 lengths on 1 needle at both ends of the V flower, 2 locks correspond to 2 locks").

Repeat the hook method in parentheses, after the last group of hooks is 24 long, hook 2 long 2 locks on the last 1 needle, and pull out with the standing needle.

How to knit raglan sleeve sweater from top to bottom:

1. Set the size of each part of the garment first. Such as: bust, length, sleeve width, sleeve length. Knit flat needle samples and calculate the number of needles and rows in each part.

2. Needle: the size is the head circumference *, and the size of the high collar is the head circumference *. The number of needles is calculated based on the density of the sample.

3. Machine collar: first use three rows of flat needles for coarse knitting, one row of upper needles, three rows of flat needles, and then fold them in half and form a double layer. Then use a fine needle to weave a double thread upward, weave to your preferred length, and close the needle to break the thread.

4. The lower part: first divide the number of stitches in the front and back pieces and sleeves, the front and back pieces account for 35% each, and the two sleeves account for 15% each. Because I decided that the back piece of the raglan jacket is 2 cm higher than the front piece, the back piece should knit 2 cm of rows before the front piece, that is, the needle will be added before the front piece.

In order to have the same number of stitches at the beginning of the front piece, the number of stitches at the beginning of the front and back is equal, and the number of stitches at the beginning of them should be adjusted.

5. Use a thick needle to pick the needle, first pick the needle, pick the number of needles in the back piece 45 needles, put the marker needle, and then pick 2 needles (these 2 needles are the number of needles in one sleeve). Turn over, the first stitch is not knitted, knitted to the end, put the marker needle, pick 2 stitches (this is the needle of the other sleeve). Turn to the front, the first needle is not knitted and picked, in front of the marker needle, a knitting twist needle (that is, the thread between the needles is picked up, knitting the twist needle), knitting a needle, the marker needle is picked to the right needle, knitting a needle, twisting the needle.

6. The round-trip speed of the front collar: the depth of the front collar is set at 4cm = 16 rows, and the order of picking the needles is 2-2-42-3-22-4-1 (this is the number of unilateral times) and the middle 13 needles - the end of the pick.

7. In order not to let the starting position of each row be in front of the chest, I broke the line after picking the collar. Put the thread on the back diameter and start knitting again, twist and add needles on both sides of the four diameters in the next row, weave to your favorite position and start weaving jacquard. Don't miss the marker on the path, it's a lot more convenient to have it.

When jacquard, the diameter of the needle is still the same, and the jacquard does not interfere with each other. Until the number of stitches on the bust is enough (remember to subtract the number of stitches to be added on both sides of the armpit when dividing the sleeves, that is, at the beginning, the bust is 121 stitches wide enough, then if you plan to add 4 stitches on both sides of the glue, you should knit to 121-8=113 stitches, and start to divide the sleeves), the number of stitches in the sleeve width will definitely be enough. Begin to split the sleeves.

Under normal circumstances, as long as the number of stitches is enough, the armpit is long enough) <>

8. Weave as usual in the future. The bodice is knitted in circles, and the sleeves are knitted in the pins.

Generally 240 to 260 stitches. The calculation of the knit size of the back piece of the sweater jacket is:

Bottom edge needle = (1 2 chest circumference 1 cm) horizontal density + sewing loss (needle), length line = (length bottom rib) straight dense.

The number of long rows = (length, bottom ribs, hanging shoulders) Straight and dense.

Shoulder width number of stitches = shoulder width Horizontal dense sewing consumption (needle).

The total number of hanging shoulders = the length of the hanging shoulders is straight and dense.

The number of stitches on the shoulder = (1 2 the number of chest pin and the number of stitches with shoulder width) 27. Hanging shoulder stitch collection method: after receiving 3 stitches and 6 stitches flatly, She needles generally subtract 1 stitch per 2 rows, and the number of stitches should be collected within the height of 7 cm and 9 cm.

, the number of needles at the back neckline = the width of the back neckline + sewing consumption (needle), the number of stitches on one shoulder = (the number of stitches at the width of the shoulder, the number of stitches at the width of the neckline) 210, the number of stitches in each row of the shoulder slope = the number of stitches in one shoulder and the number of high rows of shoulders.

1. The sleeves of the sweater can be knitted in pieces from the bottom to the top, or they can be knitted in cylinders, starting from the cuffs, knitting the cuffs about 1 inch and a half long, and then adding needles (about 8 needles). After adding the needle, start knitting the pattern, adding needles to both sides every 4 6 rows, so that the two sides of the sleeve piece are knitted upward in a slope shape (in the direction of the sleeve cage).

2. Then, the knitting length is (from the cuffs to the armpits), that is, the length of the sweater from the edge to the minute hand is basically the same, and then start to leave 4 stitches on both sides, and then continue to knit upward, every 2 rows to receive a needle (both sides are consistent), knitting about 1 inch, and begin to change to every 5 lines to receive a needle (also consistent on both sides).

3. Finally, the length of the knitted sleeve cage is consistent with the length of the sleeve cage on the sweater, and the needle can be collected, and the single sleeve is knitted.

4. Finally, fold the sleeve piece (the reverse side is outside) into a sleeve, compare it neatly from the cuff, and start to sew it into a sleeve from the bottom to the top.

Thread: 1 strand of skin-friendly cotton, 9 regiments.

Needle: Sanyan brand No. 9 ring needle, No. 11 long and short straight needle each pair.

Knitting steps: 1. The body part of the body is beaten to the open clip, the broken end is small, except for the two sleeves in the open clip to leave 40cm threads, sewing the armpit part of each of the 6 stitches.

2. Make two sleeves, the left sleeve and the right sleeve are the same weaving, and the seams should be reduced on both sides. (Length: cuffs to armpits).

3. Leave 6 stitches on the body and armpits of the two sleeves, and thread them up. When the collar nest is opened, the rear collar nest is the axis of the dry burning, and the front and back sides are woven back and forth until the height of the rear nest is appropriate.

4. Then the body and two sleeves are connected and knitted. The method of reducing the needles of the 4 shoulder seams is to reduce the 4 lines of the Tong void once, and each shoulder seam is subtracted by 2 stitches on both sides each time, for a total of 4 stitches; (4 sewn with 4 sewn shoulders) for a total of 16 stitches. After 3 times, only 1 stitch is lost on each shoulder seam raglan sleeve.

1. After weaving the shoulder length to your satisfaction, leave a thread that is 2-3 times the length of the shoulder circumference. (The same method is used for sewing shoulders, scarves, etc.) The following samples are for demonstration purposes only. )

<>3. Then you need to use the left needle to pick the right needle of the two needles to the left before the needle, that is, the two needles are picked by each other, and then talk about the return to pick the past, and then the needle is collected again.

4. Continue to accept the needle in this way until the thread is completely closed, cut the thread, taking care to leave some length of the thread.

5. Then use a needle to tie the excess thread on the scarf, poke it into the stove inside, and then you can hide the thread, so that the operation can be.