How to reset the big seconds hand of a Seiko watch

It's a Seiko multi-function system, and the big second hand is a chronograph second hand! Operation method: 1. Pull the watch handle to the stop second and pull out the time.

Press and hold the button at 2 o'clock for two or three seconds to see which pointer automatically rotates quickly, and then press the button at 4 o'clock to adjust the pointer to zero. 3. If you want to adjust the other hands of the chronograph part, you can refer to step 2.

1. First of all, we make sure that there is a button up and down, and a middle one.

2. We completely pull out the middle pull head until the watch is in a stopped state.

3. Press and hold the upper and lower buttons at the same time for more than 3 seconds, we will find that the "hour" hand of the timekeeping will turn, and then release the two buttons, indicating that we can now adjust the "hour" hand to the position we want, and the adjustment method is to press the above key to adjust.

4. Then press and hold the upper and lower buttons at the same time for more than 3 seconds, we will find that the "1 20 seconds" hand of the timing will turn, and then release the two buttons, indicating that we can now adjust the "1 20 seconds" hand to the position we want, and the adjustment method is to press the above key to adjust.

5, and then press and hold the upper and lower buttons at the same time for more than 3 seconds, we will find that the "second" hand of the timing turns, and then release the two buttons, indicating that we can now adjust the "second" hand to the position we want, and the adjustment method is to press the above key to adjust.

After all the adjustments are made, push the middle head to make the watch work normally.

Summary. Seiko mechanical watch does not go, it may be a collision. Because watches are high-precision products, they need to be carefully stored in order to get the best results.

Excessive collisions must be minimized, with special care not falling on hard objects. Normal collisions caused by sports such as tennis or golf will not affect the watch, but users of the Twin Seiko series (high-precision products) must take off their watch while engaging in such sports to avoid damaging the product.

Hello dear <>

You are welcome to consult me, I am honored to meet you. Now I see that the waiter has asked you to ask for the question, Yu Tanqing I will give you the answer, please wait a while, and Qing will serve you immediately.

Seiko mechanical watch does not go, it may be a collision. Because watches are high-precision products, they need to be carefully stored in order to get the best results. Excessive collisions must be minimized, with special care not falling on hard objects.

Normal collisions caused by sports such as tennis or golf will not affect the person who changes the Twin Seiko watch, but users of the Twin Seiko series (high-precision products) must remove their watch while engaged in such sports to avoid damaging the product.

I hope this service can help you, you can click on my avatar to follow me, and if you have related questions in the future, you can ask me questions again, and give me a thumbs up after the end of the consultation with a convenient guess Finally, I wish you a happy life! <>

Flowers cracked old forest].

Summary. Hello O-pro Eco-Drive watch with chronograph function, its large second hand is the chronograph seconds hand. Press the upper button to start the chronograph function before the big seconds hand moves, press the upper button again to stop the chronograph, and press the lower button to clear the chronograph second hand and the chronograph minute hand.

In addition, the upper limit of the chronograph function of the watch is 59 minutes and 59 seconds, after which the big seconds hand will stop at 12 o'clock, which is a normal phenomenon.

Hello Oh pro Eco-Drive Kaicha watch with chronograph function, its large second hand is the chronograph second hand. Press the upper button to start the chronograph function before the big seconds hand moves, press the upper button again to stop the timer, and press the lower button to clear the chronograph seconds and minutes. In addition, the upper limit of the chronograph function of the watch is 59 minutes and 59 seconds, after which the big second hand will stop at 12 o'clock, which is a normal phenomenon.

Excuse me: What is the reason for walking for 5 seconds at a time? How to return to normal time?

Hello Rado second hand 5 seconds go once because of the Eco-Drive watch with a chronograph function, its large second hand is sold with closed as a chronograph second hand. Press the upper button to start the chronograph function, the large second hand will move, press the upper button to stop the timing, press the lower button to date the second hand and the middle crack hour and minute hand to clear the old Ming.

In addition, the upper limit of the chronograph function of the watch is 59 minutes and 59 seconds, after which the big seconds hand will stop at 12 o'clock, which is a normal phenomenon. If it is a two-pin split-front quartz watch, the movement and circuit will be changed accordingly. The frequency of the motor should be reduced, usually down to 1 20Hz, that is, every 20 seconds, the stepper motor rotates once, and each rotation is 180 degrees.

The drive train can also be subtracted by one wheel to make the structure simpler.

Summary. Hello, after the second hand falls out, immediately pull out the watch handle to stop walking.

Then it is not recommended to disassemble it yourself to install the watch hands, you need to use professional tools, the components of the watch are relatively small, and professional watchmakers have to wear a magnifying glass to check and repair it. The handle of the watch handle can be pulled out with a little more force, and it is not easy to break the handle core with too much force, so it is not recommended to operate it yourself. Moreover, after the overall dismantling of the movement is completed, it also needs to be tested for waterproofing.

The second hand of this watch has fallen off, how to fix it.

Hello, after the second hand falls out, immediately pull out the watch handle to stop walking. Then it is not recommended to disassemble it yourself to install the watch hands, you need to use professional tools, the components of the watch are relatively small, and professional watchmakers have to wear a magnifying glass to check and repair it. The handle of the watch handle can be pulled out with a little more force, and it is not easy to break the handle core with too much force, so it is not recommended to operate it yourself.

Moreover, after the overall dismantling of the movement is completed, it also needs to be tested for waterproofing.

Don't do it yourself.

Summary. Is only the second hand moving? Or is the whole watch gone?

Is only the second hand moving? Or is the whole watch gone?

The table will go. The small seconds hand walks, but the large second hand does not move.

I guess the second hand on the movement has fallen off.

Isn't it a problem with the settings of your watch?

I can only find a watch repairer for you to open and see, but it will affect the waterproof.

Ok thanks.

I haven't worn this Seiko watch, or maybe the needle you dialed the watch didn't press to the inside.

The last time I asked the watchmaker to fix it, he explained that the big seconds hand was supposed to be used for timekeeping.

The small seconds are used for chronographing.

However, the chronograph hand generally does not affect the movement of the normal hand.

1. The watch hand can be replaced if it is lost or damaged, please don't worry too much. Since the hands are installed in layers, and the top tube is connected to the second hand, the second hand is usually lost. If the watch hands are dropped, the crown should be pulled out in time to stop moving, so as to prevent the hands from scratching the watch, the dial or the spring stove from breaking themselves.

After pulling out the crown, please repair it in time to prevent the watch from dusting. In general, if there is no damage to the inside of the watch, it is easier to repair, but if the wheel tube is deformed, broken or the parts are worn, the repair will be slightly more difficult.

2. Pay attention to the installation of the watch hand to prevent scratching the dial, resulting in the reduction of the waterproof performance of the watch. When installing the watch hands, a film is placed on top of the dial to protect the watch dial. After installing the watch hands, a comprehensive anti-forest bridge water test needs to be done, and the waterproof ring needs to be replaced again if it is aging.